VOLVO

Fits Piston 144 Diameter Cylinder Liner no. ref : 20737361  Applications: Volvo D16 Alternative to 88800313 15-A

Make sure you position the holder (A) so that the probe tip is on the highest point of the cylinder liner Applications: VOLVO D7 D9 D11 D12 D13 D1...

Use for remove gear and the needle bearing This tool to be used with FEPRO1828 Application: B5LH,B11R,B12B, B13R Alternative to 9990030 15-E

No.1 used to remove bearing of 12 speed transmission No.2 used to remove gear of 12 speed transmission Clamp is required while removing Applicatio...

The SPL Bearing Cap Installer was designed to be as simple as possible. Pre-determined “installed heights” specified by the manufacturer have been...

J-47450-1 Cam Gear Aligner Tool Sold in Kit FEPRO4514 

Instantly shears off the cotter pin allowing the 3/16″ clevis pin to be easily removed. The spring-loaded plunger positions itself automatically ov...

***Box Included*** Fully adjustable pulling arms and stud adapters are quick and easy to install Includes following Adapter set: 5/8” – 18 Axle St...

For pressurizing cooling system Made in the U.S.A. Female 47 x 3mm threads Applicable: All Volvo models and 1978-1993 Saab 900, 1994 Saab converti...

88800511 Alternative Compression Test Adapter Tool This will work for the cups listed below: SBI: 240-1053 (Stainless) Volvo/Mack: 21401136, 85137...

Simplifies and expedites the removal of heavy-duty yokes on drive shafts, transmissions and rear-end differentials without damage to yokes or other...

Guide Pins are alignment tools used to ensure the Control Assembly is reinstalled in the correct position and orientation onto the AMT (Automated...

Alternative to TG16002 Alternative Brake Anchor Pin Press Tool  Safely and easily remove brake anchor pins and bushings on virtually all 16-1/2” S...

A complete service kit for Knorr-Bremse Air Disc brake set. Series of disc brake: SB5, SN5, SB6, SN6, ST6, SB7, SN7, SK7, SM7, SL7, ST7 Applicatio...

Gear for rotating engine flywheel during the timing  Application: VOLVO D7 D12 Alternative to OEM 9998068 1-D

This tool has been designed and tested to suit Hendrickson manufactured torque rods fitted with 50 mm bushes. Using this tool on other manufacturer...

Safely and efficiently removes virtually all Haldex self-adjusting slack adjusters including left offset, right offset and standard elongated arm d...

Used for checking cylinder liner height above block face.  Application: D5 D7 D9 D11 D12 D13 D16 This tool must combine with the gauge 9989876 Alt...

Applicable: VOLVO FM12 D13 MACK Size: Dr. 1/2", 6 Points, 74mm Alternative to OEM 9996480 1-D

Remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions Manufactured from high-grade steel t...

88800196 Volvo Mack Fuel Injector Sleeve/Tube/Cup Installer Tool Alternative Works on injector sleeve 85104134 and 85104133.Applications: Volvo D1...

Alternative to 9990030 9992619, 9992671, 9998542, 9996889 and 88800015. Hydraulic Capacity: 18 Tons Hook the tool onto the gear, install the ring...

9996483 Alternative Volvo I-Shift and Mack M-Drive Transmission Counter Shaft Holding Screw Tool  Used to hold the countershaft in place while che...

9998597 Alternative Volvo I-Shift Companion Flange Puller Tool Kit Used to remove the companion flange on Volvo I-Shift transmission. Alternative t...

9986174 Fuel Injector Sleeve/Tube/Cup Remover 22-2 Applications: Volvo Model FM12, Mack MP7 MP8 MP9 MP10 This can also be used with 88800387 to ...

85137065 High Quality Alternative Stainless Steel Injector Cup This is the new sleeve design to be used with installer tool FEPRO6174 or FEPRO0387....

Feature: Use this tool can install transmission rear oil seal easily and conveniently For a 80mm shaft, use FEPRO0174. The ring that is part of to...

Dr. 1/2” Impact sockets for VOLVO truck differential flange nut. Suitable to use with air impact wrench for quick removal. If the disassembly of d...

Found on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines Fits Davco Fuel filters 382 and 384 Dura...

Provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. Includes alternative t...

88800659 Alternative Volvo Mack Cap Plug Tool  This cap plug effectively seals designated ports or openings within the fuel system, ensuring an ai...

Upgrade from 7 Ton to 17 Ton! Kit includes: 17 ton Ram Upgraded rod Blue Case  Upgraded Ram and Rod for the FEPRO4666 and FEPRO4636

Used to remove the companion flange on Volvo I-Shift transmission. Application: Volvo/Mack FH/FM AT2412C, AT(O)2512C, AT2812C, ATO3112C. Alte...

Application: UD MK(11T)/ PK(17T) EURO 5/FE/FL/B5LH/B8L Engine type: GH7/ 7L engine. Alternative to 88840423 16-A

Make sure you position the holder (A) so that the probe tip is on the highest point of the cylinder liner Applications: VOLVO D7 D9 D11 D12 D13 D1...

Used to adjust the air brake Application: MERITOR PAN17 PAN19 PAN22 MAXX22T MAXXUS Alternative to 6401955222 640-195-522-2 DAF0907695 FREIGHTLINER...

Use this tool can install transmission rear oil seal easily and conveniently. Application: VOLVO D5 D7 D11 D12 D13 FM truck Put Seal onto the Mand...

Application: Volvo FM12 FM D5 D6 D7 D8 D9 D11 D12 D13 This remover is designed to remove the ball joints of front/ rear stabilizer.  Operation: Fi...

Alternative to 9998758 Front and Rear Stabilizer Ball Joint Remover Tool This tool is used to remove the end ball joint of the drag link Appli...

Remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions Manufactured from high grade steel t...

20 Ton Hydraulic Cylinder Ram *** Used with FEPRO3036*** 

61850 Alternative Compatibility: Fits the Most Popular Sizes for Class 7 and Class 8 Over the Road Trucks and Trailers and Some Medium Duty Trucks...

10105 Application: U-joints with bearing cups 1” to 1.25” O.D. 10104 Application U-Joints with bearing cups 1.25″ to 1.7″ O.D. Spicer SPL 90 &am...

D7 injector Sleeve 477928, 276130 This tool works on Volvo D7 engines. Used with FEPRO6861

This tool works on Volvo D7 engines. D7 injector Sleeve 477928, 276130 Used with FEPRO6420 15-D

Two 5/8" - 11 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

It use for install crankshaft front seal Alternative to 88840407  16-C

21351717 High Quality Alternative Copper Injector Cup Used with installer FEPRO6174 or FEPRO0387. Applications: MACK L6, 661 C.I., (10.8L), MP7, 2...