877-337-7864
(786) 275-4130
(M-F 8 AM - 5:00 PM EST)
877-337-7864
786-275-4130
(M-F 8 AM - 5:00 PM EST)
877-337-7864
(786) 275-4130
(M-F 8 AM - 5:00 PM EST)
877-337-7864
786-275-4130
(M-F 8 AM - 5:00 PM EST)
Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...
View full detailsPT-6410-5 PT-6400-C to ZTSE2536 Conversion Kit Alt Converts PT-6400-C to ZTSE2536. Includes High-Quality Aftermarket Alternatives of: 2x PT-6410-...
View full details***Metal Box Included*** Alternative to 9992619, 9992671, 9998542, 9996889 and 88800015. Hydraulic Capacity: 18 Tons Hook the tool onto the gear,...
View full detailsThis tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...
View full detailsThis high quality base has a very strong magnet (50-lb force) which can mount to flat or round surfaces at any angle firmly and is easily activat...
View full detailsThis adapter must combine with FEPRO1828 Application: VOLVO Alternative to OEM 9996889 1-E
Fits Most Class 8 Over the Road Trucks and Trailers and Some Medium Duty Trucks. Use the tapered driver side for bearing races and the flat side fo...
View full detailsRemove the old seal by tapping in a puller inside the seal and pulling it out with a slide hammer. Make sure not to damage the crankshaft. Slant t...
View full detailsAssists to remove BOSCH and LUCAS diesel injectors With M8, M12, M14 adapters M8 x P 0.75 M12 x P 1.5 M14 x P 1.5 Applicable : VOLVO...
View full detailsUse for remove gear and the needle bearing This tool to be used with FEPRO1828 Application: B5LH,B11R,B12B, B13R Alternative to 9990030 1-E
J-47450-1 & J-44426 Cam Gear Aligner Tool Sold in Kit FEPRO4514 1-A
Install on the output shaft to separate the gearbox housing. Alternative to 9996479 & 9996925 Applications: Volvo/Mack FH/FM AT2412C...
View full detailsThis tool is to split the main housing and range housing Application: VOLVO FM AT2512C AT2412C AT2812C AT03112C Alternative to OEM 9998051 15-A
Install on the output shaft to separate the gearbox housing. Application: Volvo truck Size: M22 Alternative to 9996479 1-A
Remove and install threaded leaf spring and shackle pins on Western Star, International, Peterbilt and Kenworth suspensions Manufactured from high...
View full detailsTool for installing thermostat sealing ring on the D12C engine Application Volvo Engine OEM 9998619 15-A
The lifting tool for the gearbox, flywheel, engine head Application: VOLVO D5, D9, D11, D12, D13 Alternative to 9996239 15-A
Fits Piston 123 Diameter Applications: Volvo D11 / MACK MP7 Sleeve number ref.: 20820662 Alternative to 88800318 J-48205 15-B
+ Additional Adapters Suitable for a wide variety of applications on Mack trucks Easily remove the threaded bush from spring eye. Bush no. re...
View full detailsJ-44514-1A Alternative Gauge Plate Tool Sold in Kit FEPRO4514 1-A
I-Shift Transmission Main Shaft Gear Installer Adapters 9996315 & 9996081 Tool Kit Alt Used to install VOLVO (FM 440/ 500/ FH 540) truck, Rena...
View full detailsVolvo 9998532 Cup Extractor Tool Alternative. This tool works on Volvo D7 engines. Injector sleeve puller 477928, 276130 superseded from 9996643. 1-D
***Metal Box Included*** Thread Adaptor M18xP1.5xL Thread Adaptor M20xP1.5xL Thread Adaptor M22xP1.5xL Thread Adaptor M24xP1.5xL Thread Adaptor ...
View full details09310 Chadwick & Trefethen Carbon Straight LP Reamer Size 31 Adjustment Range : 1 7/16" - 1 5/8" 1.437 - 1.625 ** Replacement Carbon Steel ...
View full details09300 Chadwick & Trefethen Carbon Straight LP Reamer Size 30 Adjustment Range : 1 1/4" - 1 7/16" 1.250 - 1.437 ** Replacement Carbon Steel ...
View full detailsDr. 1/2" 15 POINTS 107mm Alternative to 9998487 1-B
Instantly shears off the cotter pin as the clevis pin is easily removed. The spring-loaded plunger positions itself automatically over the brake cl...
View full details18 Ton Hydraulic Cylinder Ram *** Pump and Hydraulic Cylinder available with FEPRO3636 ***
No.1 used to remove bearing of 12 speed transmission No.2 used to remove gear of 12 speed transmission Clamp is required while removing Applicatio...
View full detailsSpecially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems...
View full detailsRemove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions Manufactured from high-grade steel t...
View full details21351717 High Quality Alternative Copper Injector Cups (Set of 6) Used with installer FEPRO6174 or FEPRO0387. Applications: MACK L6, 661 C.I., (10...
View full detailsMake sure you position the holder (A) so that the probe tip is on the highest point of the cylinder liner Applications: VOLVO D7 D9 D11 D12 D13 D1...
View full detailsUsed for checking cylinder liner height above block face. Application: D5 D7 D9 D11 D12 D13 D16 This tool must combine with the gauge 9989876 Alt...
View full detailsApplicable: VOLVO FM12 D13 MACK Size: Dr. 1/2", 6 Points, 74mm Alternative to OEM 9996480 1-D
This tool is designed for removing nut to replace bearing. Application Volvo Trucks The Volvo truck fan bearing base socket has a special 4-inter...
View full details85137065 High Quality Alternative Stainless Steel Injector Cup This is the new sleeve design to be used with installer tool FEPRO6174 or FEPRO0387....
View full detailsProvides fast and effective removal and installation of even the most seized wheel studs. Remove and install 10 studs in only 10-15 minutes. Elim...
View full detailsFits Piston 144 Diameter Cylinder Liner no. ref : 20737361 Applications: Volvo D16 Alternative to 88800313 15-A
Gear for rotating engine flywheel during the timing Application: VOLVO D7 D12 Alternative to OEM 9998068 1-D
Alternative to 9998758 Front and Rear Stabilizer Ball Joint Remover Tool This tool is used to remove the end ball joint of the drag link Appli...
View full detailsFor pressurizing cooling system Made in the U.S.A. Female 47 x 3mm threads Applicable: All Volvo models and 1978-1993 Saab 900, 1994 Saab converti...
View full detailsFound on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines Fits Davco Fuel filters 382 and 384 Dura...
View full detailsRemove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions Manufactured from high grade steel t...
View full details88800188 88880174 Volvo Cylinder Head Lifting Bracket Tool Kit with Adapter Applications: Volvo D16 Engine 2007-2016 applicable models VHD, VNL, V...
View full details88800188 Volvo Cylinder Head Lifting Bracket Tool Applications: Volvo D12, D13 and D16 Engines Mack MP8 and MP10 Engines Use this tool to aid i...
View full detailsSafely and efficiently removes virtually all Haldex self-adjusting slack adjusters including left offset, right offset and standard elongated arm d...
View full details***Box Included*** Fully adjustable pulling arms and stud adapters are quick and easy to install Includes following Adapter set: 5/8” – 18 Axle St...
View full details