DURAMAX

Pitman Arm Puller is designed to remove pitman arms on Sheppard M100 gearboxes. Eliminates dangerous hammering and cutting torch methods. May be us...

This is a replacement set of 2 thick feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6400-9A Minimum thickness of .2...

This is a replacement set of 2 thin feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6410-4A Minimum thickness of .14...

Adjustable jaws with locking feature to suit both hexagon & octagon wheel bearing lock nuts Includes three sets round & three sets square ...

EN-48313 Alternative Timing Chain Retainer Tool Set  Verify your application with the info provided. EN-48313 Timing Chain Retention Tool works on...

Application: Commonly found on class 3-5 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR etc.)  Easily remove...

Material: CR-V socket with satin & bright chrome plated, S2 bits with manganese phosphate  Contents:  18- 1/4" Dr.         5- Star-E: E4-5-6-...

DT-52987 Alternative ProShear Nut Socket - 2.0 in  The wheel hub and brake rotor assembly is held on the full-floating rear axle by a hub nut again...

Kit Includes  FEPRO0386 - PITMAN ARM SPREADER ALTERNATIVE TO TG 10386 FEPRO0388 - INTERMEDIATE PITMAN ARM PULLER ALTERNATIVE TO TG 10388 FEPRO0389 ...

Used On Most CAT, Cummins and Detroit Diesel Engines (Class 7 and 8 Trucks). The double-sided centering bushing guides the seal driver so that sea...

This Rear Crankshaft Oil Seal and Wear Sleeve Installer J-44642 Alternative is used on ISUZU 6.6L Duramax 2001-Later GMT800, 2500HD, 3500 with 6.6...

Application: Commonly found on class 6-8 transportation trucks and equipment. (Kenworth, Peterbilt, Freightliner, Mack, Volvo, etc.)  Easily remov...

Front Crankshaft Seal and Wear Sleeve Installer  J-44645 Alternative  Applications ISUZU 6.6L Duramax 2001-Later GMT800 GMT800 3500 6.6 liter dies...

8420C Front Axle Shaft Remover Tool Set Alt 8420A 8420B Use this special tool with a C-3752 Slide Hammer and OTC adapter 8005 to remove the axle sh...

EN-51955 Alternative Injector Seal Installer & Sizer Tool Set  Works on injector 55515113(2.0L) & 12733960(2.7L) Applications: Acadia 2.0L...

This Rear Crankshaft Oil Seal and Wear Sleeve Installer J-44642 Alternative is used on ISUZU 6.6L Duramax 2001-Later GMT800, 2500HD, 3500 with 6.6...

For Injector Sleeves 8-97606661-0, 8-98018462-01, 98018462 This tool set allows stainless steel or brass injector nozzle sleeve replacement wit...

DT-52989 GM-52989 Alternative ProShear Nut Socket 2.375 in.  The wheel hub and brake rotor assembly is held on the full-floating rear axle by a hub...

Eliminates airlocks and refills entire cooling system in seconds including heater core without the time consuming process of bleeding and purging...

This tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

DT-52988 ProShear Nut Socket - 2.125 in Alternative The wheel hub and brake rotor assembly is held on the full-floating rear axle by a hub nut agai...

J-44641, J-44642, J-44644 & J-44645 Alternative Front & Rear Crankshaft Seal Installer & Remover Set Includes FEPRO4644 FEPRO4641 FEPRO...

Designed to fit all Class 7 and 8 trucks including a wide variety of drive-lines from Spicer and Meritor Improved material and heat treat on major...

J-43266 5-8840-2624-0 7.8L Isuzu Duramax Injector Nozzle-Cup-Sleeve-Tube Installer Alt ST-217 for 7800 2005-2010 Isuzu NPR 4HK1 6HK1. Used with...

Found on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines Fits Davco Fuel filters 382 and 384 Dura...

J-43265 / 5-8840-2623-0 & J-43266 Nozzle Sleeve Remover and Installer Set Alt Stallion ST-S912 for Duramax 7800 7.8L, 2005-2010 Isuzu NPR 4HK1....

Used to react against the crankshaft end to pull the seal out. Application: ISUZU 6.6L Engine; 2001- Later GMT800, 2500HD, 3500 with 6.6-liter Du...

EN-51987 6.6L Injector Remover Tool Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VI...

J-45910 6.6L Duramax Injector Nozzle-Cup-Sleeve-Tube Remover & Installer Alt Stallion ST-193 Applications: 6.6L DURAMAX DIESEL ENGINE ST-19...

Used to react against the crankshaft end to pull the seal out. Application: ISUZU 6.6L Engine; 2001- Later GMT800, 2500HD, 3500 with 6.6-liter Du...

Fits the Most Popular Size Seals for Class 7 and Class 8 Trucks The driver is designed to hold the seals to make installation easier Includes five...

J-46594 Injector Puller 6779 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VIN, plus...

EN-47589-8 6.6 01-07 Duramax Fuel Pressure Test / Block Off Adapter Set Alternative  Includes eight 9011 or EN-47589-1 This adapter is used during ...

Two tools in one 42 mm 6 side fits 2011 to current years 40 mm 12 side fits 2001 to 2010 Used every time a fuel filter is replaced Made in U.S.A.

Used for the internal adjustment of Spicer angle-spring and multiple-lever clutches Until now, a pry bar or other makeshift method was used and of...

Includes: 1x DT-52987 Alternative GM-52987 2.0" ProShear Nut Socket Tool  1x DT-52988 Alternative GM-52988 2.125" ProShear Nut Socket Tool  1x DT-...

Used to react against the crankshaft end to pull the seal out. Application: ISUZU 6.6L Engine; 2001- Later GMT800, 2500HD, 3500 with 6.6-liter Du...

EN-49774 Injector Remover Tool 6777 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VI...

Injector Remover J-44639 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VIN, plus 200...

9011A Fuel Pressure Test Adapter 9011 EN-47589-1 Alternative This adapter is used during the diagnostic procedures on the GM/Chevy 6.6L (LB7 and LL...

28mm for 2010-2018, 6.7L Dodge Cummins Fuel Filter Canister

Removes stubborn hubs when nothing else will Two methods of removal which includes removal of the hub with the aid of the power steering, and remo...

6.6L Duramax Diesel J-44644 Front Crankshaft Seal and Wear Sleeve Remover Puller Alt ST-196 Applications: ISUZU 6.6L 2001- Later GMT800, 2500HD...

J-44641 6.6L Duramax Rear Crankshaft Seal and Wear Sleeve Remover Puller Alt ST-195 Applications: ISUZU 6.6L 2001-Later GMT800, 2500HD, 3500 wi...

J-43265 5-8840-2623-0 7.8L Isuzu Duramax Injector Nozzle-Cup-Sleeve-Tube Remover Alt Stallion ST-216 for 7800 7.8L, 2005-2010 Isuzu NPR 4HK1. U...