FORD

Ford Powerstroke 6.7L Injector Removal Tool 310-230 Alternative for F-250 F-350 F-450 F-550 2011-2018 Diesel Engines. With our Ford Powerstroke Inj...

Ford Truck 6.0L 6.4L Powerstroke Fuel Injector Sleeve Cup Remover and Installer Tool Kit for Engines 2003 to 2010 F250 F350 F450 F550 Maxxforce 7 2...

This is a replacement set of 2 thick feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6400-9A Minimum thickness of .2...

This is a replacement set of 2 thin feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6410-4A Minimum thickness of .14...

T444E Power Stroke 7.3 REAR SEAL/SLEEVE INST NAV 444 E & FORD POWER STROKE 7.3 (Will not work on 6.0) (M12x1.25 metric crank bolts) 5.25 inch ...

Adjustable jaws with locking feature to suit both hexagon & octagon wheel bearing lock nuts Includes three sets round & three sets square ...

151-4832 & 221-9777 C-7 C9 3126B In-Vehicle Fuel Injector Remover and Installer Nozzle-Cup-Sleeve-Tube Tool Head on vehicle Remover and Install...

Ford 7.3L Powerstroke or T444E Damper Crank Oil Seal Installer Tool ZTSE4310 303-484 Alt. This Ford Damper/Crank Oil Seal Installer ZTSE4310 is an ...

EN-48313 Alternative Timing Chain Retainer Tool Set  Verify your application with the info provided. EN-48313 Timing Chain Retention Tool works on...

DT-52987 Alternative ProShear Nut Socket - 2.0 in  The wheel hub and brake rotor assembly is held on the full-floating rear axle by a hub nut again...

Application: Commonly found on class 3-5 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR etc.)  Easily remove...

EN-51955 Alternative Injector Seal Installer & Sizer Tool Set  Works on injector 55515113(2.0L) & 12733960(2.7L) Applications: Acadia 2.0L...

Material: CR-V socket with satin & bright chrome plated, S2 bits with manganese phosphate  Contents:  18- 1/4" Dr.         5- Star-E: E4-5-6-...

DT-52989 GM-52989 Alternative ProShear Nut Socket 2.375 in.  The wheel hub and brake rotor assembly is held on the full-floating rear axle by a hub...

Kit Includes  FEPRO0386 - PITMAN ARM SPREADER ALTERNATIVE TO TG 10386 FEPRO0388 - INTERMEDIATE PITMAN ARM PULLER ALTERNATIVE TO TG 10388 FEPRO0389 ...

Applications: Ford Super Duty F-250, F-350, F-450, and F-550 equipped with 6.7L Power Stroke Diesel model years 2011, 2012, 2013, 2014, 2015, ...

Application: Commonly found on class 6-8 transportation trucks and equipment. (Kenworth, Peterbilt, Freightliner, Mack, Volvo, etc.)  Easily remov...

DT-52988 ProShear Nut Socket - 2.125 in Alternative The wheel hub and brake rotor assembly is held on the full-floating rear axle by a hub nut agai...

Ford Super Duty F-250, F-350, F-450, and F-550 equipped with 6.7L Power Stroke Diesel model years 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, ...

Stallion ST-160 Output Shaft Nut Socket - 307-649 Alt Applications: 2011 2012 2013 Torqshift 6 6R140 F-250 F-350 F-450 F-550 F-650 F-750 Tool f...

7.3L Powerstroke Ford Diesel Fuel Injector Sleeve Cup Puller Remover Installer Tool KitIncludes in-vehicle alternatives for 303-DS105 D94T-9000-B 3...

Works with many domestic vehicles Also works with some Mercedes and Nissan models For pressurizing cooling system Ford/Lincoln/Mercury: Cougar/Thu...

6.7L Powerstroke Crankshaft Front and Rear Seal Installer Remover Master Set Kit Includes FEPRO1509 FEPRO1509-1 FEPRO1510 FEPRO1513 FEPRO1514 Kit I...

This tool holds the drive pinion flange. Universal design with 1/2" slots fits flange bolt centerlines up to 2-5/8". Includes 5/16" and 3/8" bolts...

 This high quality base has a very strong magnet (50-lb force) which can mount to flat or round surfaces at any angle firmly and is easily activat...

Eliminates airlocks and refills entire cooling system in seconds including heater core without the time consuming process of bleeding and purging...

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

Stallion ST-158 Front Cover Crankshaft Oil Seal Installer Set 303-335 T88T-6701-A Alt. Applications: 3.0L 3.5L 3.7L 3.9L 4.2L 4.6L 4.9L 5.4L 6.8L...

303-1528 3.7L 3.5L 3.3L Water Tube Seal Remover Installer Tool Alt ST-279 Engine — 3.7L : Mustang : 2011 Engine — 3.7L : F-150 : 2011 Engine — 3.5...

307-664 Transaxle Case Bushing Installer Alt Stallion ST-225 Used with 205-153 or ST-214 driver handle. Manual Transaxle/Transmission — MT82 Getra...

6.7L Front Crankshaft Seal Installer 303-1509 & 303-1509-01 Included  BC3Z-6700-A seal LC3Z-6700-A seal Applications: Ford Super Duty F-250, ...

Stallion ST-162 EGR Valve Puller Set 303-1267A ZTSE4743 7482 Alt Used with 303-1258 Keep in mind that sometimes the EGR's are stuck too tight and...

Application: Ford Super Duty F-250, F-350, F-450, and F-550 equipped with 6.7L Power Stroke Diesel model years 2011, 2012, 2013, 2014, 2015, 2016...

303-767 303-768 6.0L Fuel Injector Sleeve Cup In-Vehicle Tool and Parts Set Alternative  With Premium Tap Applications: VT275 24 Valve, VT365 32 Va...

Applications: Ford Super Duty F-250, F-350, F-450, and F-550 equipped with 6.7L Power Stroke Diesel model years 2011, 2012, 2013, 2014, 2015, 201...

307-776 307-458 ZTSE9141 Output Shaft Locknut Socket Alt Stallion ST-170 Used with a 1-1/8" socket. You'll find Stallion Products are widely consid...

205-153 ZTSE2365A T80T-4000-W Driver Handle Adapter Alt Stallion ST-214 Also an Alternate to Kia K94U-0001-G Version:1.0 StartHTML:000000259 EndH...

Stallion ST-163 Engine Lifting Bracket 014-00073 303-F047 Alternative Engine — 3.7L : F-150 : 2011 Engine — 4.6L (3V) : Mustang : 2009 Engine — 6....

303-1518 Alternative 6.7L Ford Powerstroke Engine Removal Bracket Tool  Use 303-1518 engine removal bracket and 303-050 engine lifting bracket pai...

Application: Navistar 6.9L 7.3L Maximum fuel economy requires precise injector timing.  This tool securely grips the front of the fuel injection p...

8.8-Inch Ford Ring and Pinion Installation Set Alt Stallion ST-S911-B These are the most commonly used tools for the job. Refer to a manual or co...

4.5/6.0/6.4L CRANKSHAFT REAR SEAL AND WEAR RING INSTALLER 303-770 ZTSE4515C ZTSE4515 Alternative  Installs rear seal and wear ring on crankshaft. E...

Stallion ST-123 Crankshaft Vibration Damper Remover Set - 303-009 T58P-6316-D Alternative and Water Pump Shaft Protector - 303-457 T94P-6312-AH2 Al...

303-516 / T95P-6701-BH & 303-518 / T95P-6701-DH Ford Modular Engine Crankshaft Rear Oil Seal Installer Alt ST-200 Stallion You may also need ...

Includes: 1x FEPRO2987 Alternative GM-52987 2.0" ProShear Nut Socket Tool  1x FEPRO2988 Alternative GM-52988 2.125" ProShear Nut Socket Tool  1x F...

Crankshaft Front Seal and Wear Ring Installer 303-761 ZTSE4516 5863 Alternative  It's designed to eliminate lip flare on the wear sleeve and instal...

307-717 Alternative Kostal Sleeve Remover Ford Expedition equipped with Automatic Transaxle/Transmission - 6R80 model years 2009, 2010, 2011, 2012...

303-767 303-768 6.0L Fuel Injector Sleeve Cup In-Vehicle Tool and Parts Set Alt With Tap Save yourself many hours of labor by not having to remove ...