VOLVO

Volvo FM12 Truck D12 D13 D16 Heavy Duty Diesel Engine Valve Spring Compressor Tool Alternative to OEM 9990210 1-A

Tool will work on all the following cup numbers:  85137065, 21515329, 21401136,21351717, 21098621, 3183368, 85116162, 85104134, & 85124276  Vol...

+ Additional Adapters Suitable for a wide variety of applications on Volvo/Kenworth truck Easily remove the threaded bush from spring eye. Bu...

(Dr.1/2") (110-125mm) (4.33-4.92IN) Extra wide 3" Super Duty Band for better grip and reduced canister damage For use with larger hard to remove o...

Pressure rating 10000 psi Oil capacity 98 cubic inch 3/8-18 NPT oil port Unit requires 9 cfm of air at 100 PSI (at the pump) 2510A Alternative  *...

Extra wide 3" Super Duty Band for better grip and reduced canister damage For use with larger hard to remove oil filters For use with a 1/2 inch s...

This tool is designed for installation front crankshaft seal  Note: Ensure that the installation tool fits properly in the seal. Ensure that th...

***Metal Box Included*** Alternative to 9992619, 9992671, 9998542, 9996889 and 88800015. Hydraulic Capacity: 18 Tons Hook the tool onto the gear,...

Special design of cone tool make piston ring into cylinder sleeve easily Used to guide the piston into the cylinder sleeve during piston installat...

The Volvo 88800502 alternative Front & Rear Crankshaft Seal Remover Puller Tool has been created to replace the 9990113 that was discontinued b...

J-29919 3376592 Alternative Injector Setting Torque Wrench Tool This 6 inch-pounds wrench works on Cummins and Volvo Mack applications.

J-42885-A 9998599 Injector Tube Bore Brush & Cleaning Kit Alternative Includes Alternatives of: J-42885-1 (9808616) Extension Holder J-42885-2...

J-41683-A Alternative H-Ring Installation Tool  Applications: Mack Truck E-TECH and ASET engines Any valve train failure that results in excessive ...

Used to Assemble/Disassemble the Gearbox Application: Volvo  External Diameter 32MM Length: 64MM  Alternative to OEM 9996917 Tool works with FEPR...

88800387 Fuel Injector Sleeve/Tube/Cup Remover Applications: Volvo Model FM12, Mack MP7 MP8 MP9 MP10 Volvo D16 Engine 2007-2016 applicable models ...

Material: CR-V socket with satin & bright chrome plated, S2 bits with manganese phosphate  Contents:  18- 1/4" Dr.         5- Star-E: E4-5-6-...

Application: Commonly found on class 3-5 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR etc.)  Easily remove...

***Box Included*** Fully adjustable pulling arms and stud adapters are quick and easy to install Includes most common 5/8” – 18 Axle Stud Adapter ...

Volvo Transmission Cooler Line Release Hand Tool 85108826 Alternative 15mm Europower Fitting Model VHD VN VT Function Group 49. This Volvo Transmi...

88800634 Mack Spanner Wrench Fuel Pressure Regulator Use a spanner as a counter hold to prevent the common rail brackets and pressure pipes from be...

Design for removal / installation Volvo CAB BUSH & LEAF SPRING PIN BUSHING Application: VOLVO VNL VHD VML Removes and Installs the follow...

Designed to remove airline disconnect  Very Compact Application: VOLVO/UD/DAF/HINO/FUSO  Size: 6,8,10,12,14,16 MM Alternative Volvo to 88800414/08...

To dismantle the front / rear wheel axle cover of VOLVO  Application: Volvo D12 & D16 (After 1993) Size: Dr. 3/4", 115 mm, 8 Point  1-D

14pc Jake Brake Tool Set for Engine Intake and Exhaust Valve.  Alternatives to 88880052, 85111377 and 88880053  Used on intake and exhaust valve a...

Kit Includes  FEPRO0386 - PITMAN ARM SPREADER ALTERNATIVE TO TG 10386 FEPRO0388 - INTERMEDIATE PITMAN ARM PULLER ALTERNATIVE TO TG 10388 FEPRO0389 ...

To remove king pin upper cover. Specifications. 3/4”, 6 Points, 80 mm Application: VOLVO FM12 D13 1-D

09330 Chadwick & Trefethen Carbon Straight LP Reamer Size 33 Adjustment Range : 1 7/8" - 2 3/16" 1.87 - 2.187 ** Replacement Carbon Steel B...

85137065 (Set of 6) High Quality Alternative Stainless Steel Injector Cups This is the new sleeve design to be used with installer tool FEPRO6174 o...

Application: Commonly found on class 6-8 transportation trucks and equipment. (Kenworth, Peterbilt, Freightliner, Mack, Volvo, etc.)  Easily remov...

Design for removal / installation Volvo CAB BUSH & LEAF SPRING PIN BUSHING Application: VOLVO VNL VHD VML Removes and Installs the follow...

Volvo Transmission Cooler Line Release Hand Tool 85108827 Alternative 18mm Europower Fitting. This Volvo Transmission Cooler Line Release Hand Too...

This tool is used on timing gear. Application: FM12 (420.430.440.500) 1-D

***Metal Box Included*** Alternative to 9992619, 9992671, 9998542, 9996889 and 88800015. Hydraulic Capacity: 18 Tons Hook the tool onto the gear,...

Valve Support Hanger Tool Alternative to 88800352 This tool works on Volvo D9 D11 D12 D13 and D16 engines  High Quality Aftermarket Alternative *...

09260 Chadwick & Trefethen Carbon Straight LP Reamer Size 26 Adjustment Range : 13/16" - 7/8" 0.812" - 0.875" ** Replacement Carbon Steel B...

J-37720-C Mack E9, E7, & E6 Roller Lifter & Tappet Holder Kit Alternative This tool retains the roller lifters when removing and installing...

Remove the cranking tool Remove the cylinder head gasket. Secure the cylinder liners with this clamping tool Alternative to 9996966 15-A

***This Kit only for Removal Process *** Volvo and Mack Stainless Steel or Brass Injector Sleeve Cup Nozzle Tube Remover and  D11 D12 D13 D16 Engin...

85111422 Alternative Mack Volvo Upper Timing Cover Alignment Tool Set Installs the timing cover clamp tools to ensure the timing gear cover surfac...

The volvo axle nut socket 95 mm is especially designed to remove the axle nut Use with an air wrench or ratchet to tighten or loosen the axle nut ...

***Box Included*** Torque multiplier can turn small amounts of input torque into large output torque to loosen the toughest threaded fasteners whi...

Fits Most Class 8 Over the Road Trucks and Trailers and Some Medium Duty Trucks. Use the tapered driver side for bearing races and the flat side fo...

 This high quality base has a very strong magnet (50-lb force) which can mount to flat or round surfaces at any angle firmly and is easily activat...

Used on intake and exhaust valve adjustment with or without engine brakes and engine brake rocker adjustment shim Alternative to OEM 88800232 Appl...

Function: used to install the cap onto the exhaust slave piston assembly. It aids in applying the correct torque to the cap, ensuring a secure fi...

Install bolt-retained bearing caps Accurately aligns bolt-retained bearing caps for easy installation Reduces the risk of damage to needle bearing...

This adapter must combine with FEPRO1828 Application: VOLVO Alternative to OEM 9996889 1-E

Remove the old seal by tapping in a puller inside the seal and pulling it out with a slide hammer. Make sure not to damage the crankshaft. Slant t...