INTERNATIONAL

Used to drain the coolant from the radiator and low temperature radiator (LTR).  Application to International and Freightliner Cascadia trucks Cou...

+ Additional Adapters Air Pump Specs : Pressure rating 10000 psi Oil capacity 98 cubic inch 3/8-18 NPT oil port Unit requires 9 cfm of air at 100...

Universal Heavy Duty Diesel Cylinder Liner Puller Alternative to PT-6400-C and 3376015. This tool works on WET LINERS ONLY with a 3-7/8 to 6-1/4 bo...

Leaf Spring Socket Master to Remove and Install threaded leaf spring shackle pins on International, Peterbilt, Western Star, Volvo, Mack Kenworth ...

Pitman Arm Puller is designed to remove pitman arms on Sheppard M100 gearboxes. Eliminates dangerous hammering and cutting torch methods. May be us...

This is a replacement set of 2 thick feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6400-9A Minimum thickness of .2...

Universal Cylinder Liner Puller PT-6400-C M50010-B 3376015 ZTSE2536 PT-6410-B 5P-8665 OEM Alt for Mack Cummins Caterpillar Detroit Diesel Volvo Int...

This is a replacement set of 2 thin feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6410-4A Minimum thickness of .14...

Includes ZTSE2587A 17-25-13 Remover and ZTSE2534A 04-148-3 Installer ZTSE43981 Slide Hammer and MT7934819 Tap  Tap is considered Wear Item (No Wa...

+ Additional Adapters Allows you to use any one of the Pin & Bushing Adapters to service both rubber-isolated and threaded pins and bushings -...

ZTSE4749 Alternative Rear Crankshaft Oil Seal Wear Sleeve Installer  Replaces ZTSE4374 & ZTSE4374B Applications: EGR Engines: DT466E, I530E, DT...

ZTSE4637 Alternative Rear Crankshaft Oil Seal and Wear Sleeve Installer for DT466 and DT570HT  Applications: DT466, 570HT Attention: Most workshop ...

Check fuel system pressure on diesel engines with a Compuchek test port Fits Compuchek test ports on Cummins diesel engines as well as other diese...

***FEPRO9014 Includes Tap*** Includes ZTSE2587A 17-25-13 Remover and ZTSE2534A 04-148-3 Installer Use this tool for 12 Valve (2 per cylinder) engi...

ZTSE3004B Alternative Crankshaft Front Oil Seal Wear Sleeve Installer  Applications: International, Navistar DT436, DT466,DT570, DT360, DTA360, DTA...

Application: Commonly found on class 3-5 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR etc.)  Easily remove...

Extra wide 3" Super Duty Band for better grip and reduced canister damage For use with larger hard to remove oil filters For use with a 1/2 inch s...

Material: CR-V socket with satin & bright chrome plated, S2 bits with manganese phosphate  Contents:  18- 1/4" Dr.         5- Star-E: E4-5-6-...

***Box Included*** Fully adjustable pulling arms and stud adapters are quick and easy to install Includes most common 5/8” – 18 Axle Stud Adapter ...

ZTSE4642 & ZTSE4643 DT466E DT570 In-Vehicle Injector Nozzle-Cup-Sleeve-Tube Tool Set ST-S924-B Stallion Applications: DT466E DT570 HT570, Maxxf...

ZTSE4875 373-4726 Alternative 13.0L 11.0L Rear Crankshaft Oil Seal Installer Tool Used to install rear radial shaft oil seal 62015106010 on the 11....

Kit Includes  FEPRO0386 - PITMAN ARM SPREADER ALTERNATIVE TO TG 10386 FEPRO0388 - INTERMEDIATE PITMAN ARM PULLER ALTERNATIVE TO TG 10388 FEPRO0389 ...

ZTSE4873 373-4725 Alternative Front Crankshaft Seal Installer Used to install front radial shaft oil seal 3004729C91 on the 11.0L and 13.0L Interna...

Application: Commonly found on class 6-8 transportation trucks and equipment. (Kenworth, Peterbilt, Freightliner, Mack, Volvo, etc.)  Easily remov...

KL50000 Counter Bore Re-Conditioning Tool The K-Line 50000 is used to resurface the seat to inlay a shim. No special bases required. The procedure...

Applications: DT 466 /570, HT 570 (DT 9 and 10) , Navistar 2004 - 2007 570 2004 - 2007 DT 466 2007 MaxxForce 10 2007 MaxxForce 9 2007 MaxxForce DT...

Releases the locking mechanism to allow fuel line removal11.8mm Fuel Line Disconnect ZTSE4773 373-4721 Applications: 11L and 13L, Navistar, CAT CT6...

ZTSE2535C Alternative Rear Oil Seal Wear Sleeve Installer ZTSE2535C 5022 04-149  Attention: Most workshop manuals are incorrect. The only way to ma...

***Box Included*** Torque multiplier can turn small amounts of input torque into large output torque to loosen the toughest threaded fasteners whi...

This tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

PT-6410-5 PT-6400-C to ZTSE2536 Conversion Kit Alt Converts PT-6400-C to ZTSE2536.  Includes High-Quality Aftermarket Alternatives of: 2x PT-6410-...

Works on OEM electrical connectors used on trucks and equipment such as Caterpillar, Kenworth, Peterbilt, Freightliner, Mack and more Also used on...

Remove and install threaded leaf spring and shackle pins on Western Star, International, Peterbilt and Kenworth suspensions Manufactured from high...

Fits Most Class 8 Over the Road Trucks and Trailers and Some Medium Duty Trucks. Use the tapered driver side for bearing races and the flat side fo...

Installs into the oil priming port in the oil module Allows for proper engine pre-lubing, preventing dry starts after engine service For use with ...

Application: Navistar 6.9L 7.3L Maximum fuel economy requires precise injector timing.  This tool securely grips the front of the fuel injection p...

18 Ton Hydraulic Cylinder Ram *** Pump and Hydraulic Cylinder available with FEPRO3636 *** 

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems...

Remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions Manufactured from high-grade steel t...

12-800-01 Alternative IPR Injector Pressure Regulator Socket Tool Used to properly remove and install the IPR valve. Applications Include: 2004 - 2...

PT-2200-95 ZTSE25144-A DT466 DT530 Counterbore Shim Cutter Plate & Bit Tool Alternative Navistar with 4.589 Bore. Includes AM-PT-2200-93 Cutter...

34900 Diesel Compression Tester Tool Set Alt #2 BACHARACH Allow a Bacharach Brand adapter to be used without tester. No. 260-01 #3 1P-5564 For test...

ZTSE6054 Alternative Rear Crankshaft Seal Adapter Ring  This adapter ring is inserted into FEPRO4637 Used to install rear crankshaft oil seal on Ma...

Found on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines Fits Davco Fuel filters 382 and 384 Dura...

Remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions Manufactured from high grade steel t...

The SPL Bearing Cap Installer was designed to be as simple as possible. Pre-determined “installed heights” specified by the manufacturer have been...

DT466 Rear Crankshaft Oil Seal & Wear Sleeve Installer Master Set ZTSE2535C, ZTSE4749, & ZTSE4637 Alt Kit Includes/Applications: FEPRO474...