VOLVO

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems 8 ...

Eliminates airlocks and refills entire cooling system in seconds including heater core without the time consuming process of bleeding and purging...

This tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...

+ Additional Adapters Suitable for a wide variety of applications on Mack trucks Easily remove the threaded bush from spring eye. Bush no. re...

J-47450-1 & J-44426 Cam Gear Aligner Tool  Sold in Kit FEPRO4514  1-A

***Metal Box Included*** Alternative to 9992619, 9992671, 9998542, 9996889 and 88800015. Hydraulic Capacity: 18 Tons Hook the tool onto the gear,...

Works on OEM electrical connectors used on trucks and equipment such as Caterpillar, Kenworth, Peterbilt, Freightliner, Mack and more Also used on...

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

PT-6410-5 PT-6400-C to ZTSE2536 Conversion Kit Alt Converts PT-6400-C to ZTSE2536.  Includes High-Quality Aftermarket Alternatives of: 2x PT-6410-...

Function: used to install the cap onto the exhaust slave piston assembly. It aids in applying the correct torque to the cap, ensuring a secure fi...

Setting Tool to measure and determine the correct shim thickness needed for the new sensor. This ensures proper clearance and alignment with the ...

09310 Chadwick & Trefethen Carbon Straight LP Reamer Size 31 Adjustment Range : 1 7/16" - 1 5/8" 1.437 - 1.625 ** Replacement Carbon Steel ...

The lifting tool for the gearbox, flywheel, engine head Application: VOLVO D5, D9, D11, D12, D13  Alternative to 9996239 15-A  

Fits Piston 123 Diameter Applications: Volvo D11 / MACK MP7 Sleeve number ref.: 20820662 Alternative to 88800318 J-48205 15-B

This tool is to split the main housing and range housing Application: VOLVO FM AT2512C AT2412C AT2812C AT03112C Alternative to OEM 9998051 15-A

Assists to remove BOSCH and LUCAS diesel injectors  With M8, M12, M14 adapters M8 x P 0.75  M12 x P 1.5  M14 x P 1.5 Applicable : VOLVO...

Use for remove gear and the needle bearing This tool to be used with FEPRO1828 Application: B5LH,B11R,B12B, B13R Alternative to 9990030 1-E

J-44514-1A Alternative Gauge Plate Tool Sold in Kit FEPRO4514  1-A

I-Shift Transmission Main Shaft Gear Installer Adapters 9996315 & 9996081 Tool Kit Alt Used to install VOLVO (FM 440/ 500/ FH 540) truck, Rena...

Remove and install threaded leaf spring and shackle pins on Western Star, International, Peterbilt and Kenworth suspensions Manufactured from high...

88800569 Volvo Mack Exhaust Rocket Compression Brake Piston Holding Tool Alternative A repair procedure and new tools have been created to repair o...

Install on the output shaft to separate the gearbox housing.  Alternative to 9996479 & 9996925 Applications: Volvo/Mack  FH/FM AT2412C...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems...

Install on the output shaft to separate the gearbox housing.  Application: Volvo truck Size: M22 Alternative to 9996479  1-A

Tool for installing thermostat sealing ring on the D12C engine Application Volvo Engine OEM 9998619  15-A  

Dr. 1/2" 15 POINTS 107mm Alternative to 9998487 1-B

18 Ton Hydraulic Cylinder Ram *** Pump and Hydraulic Cylinder available with FEPRO3636 *** 

This tool is designed for removing nut to replace bearing. Application Volvo Trucks  The Volvo truck fan bearing base socket has a special 4-inter...

Volvo 9998532 Cup Extractor Tool Alternative. This tool works on Volvo D7 engines. Injector sleeve puller 477928, 276130 superseded from 9996643. 1-D

Fits Piston 144 Diameter Cylinder Liner no. ref : 20737361  Applications: Volvo D16 Alternative to 88800313 15-A

***Metal Box Included*** Thread Adaptor M18xP1.5xL Thread Adaptor M20xP1.5xL Thread Adaptor M22xP1.5xL Thread Adaptor M24xP1.5xL Thread Adaptor ...

09300 Chadwick & Trefethen Carbon Straight LP Reamer Size 30 Adjustment Range : 1 1/4" - 1 7/16" 1.250 - 1.437 ** Replacement Carbon Steel ...

Wrench to remove the oil distribution tube in VOLVO/RENAULT gearboxes Applications: VOLVO OEM no.ref.: 9990027 Size: 1/2” ,6 Points. 50mm 1-B

Provides fast and effective removal and installation of even the most seized wheel studs. Remove and install 10 studs in only 10-15 minutes. Elim...

No.1 used to remove bearing of 12 speed transmission No.2 used to remove gear of 12 speed transmission Clamp is required while removing Applicatio...

88800188 Volvo Cylinder Head Lifting Bracket Tool Applications: Volvo D12, D13 and D16 Engines Mack MP8 and MP10 Engines Use this tool to aid i...

Instantly shears off the cotter pin as the clevis pin is easily removed. The spring-loaded plunger positions itself automatically over the brake cl...

21351717 High Quality Alternative Copper Injector Cups (Set of 6) Used with installer FEPRO6174 or FEPRO0387. Applications: MACK L6, 661 C.I., (10...

Make sure you position the holder (A) so that the probe tip is on the highest point of the cylinder liner Applications: VOLVO D7 D9 D11 D12 D13 D1...

J-44514-5 Clamp Assembly Tool Sold in Kit FEPRO4514  1-A

Gear for rotating engine flywheel during the timing  Application: VOLVO D7 D12 Alternative to OEM 9998068 1-D

Remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions Manufactured from high-grade steel t...

88800188 88880174 Volvo Cylinder Head Lifting Bracket Tool Kit with Adapter Applications: Volvo D16 Engine 2007-2016 applicable models VHD, VNL, V...

Safely and efficiently removes virtually all Haldex self-adjusting slack adjusters including left offset, right offset and standard elongated arm d...

***Box Included*** Fully adjustable pulling arms and stud adapters are quick and easy to install Includes following Adapter set: 5/8” – 18 Axle St...

Used for checking cylinder liner height above block face.  Application: D5 D7 D9 D11 D12 D13 D16 This tool must combine with the gauge 9989876 Alt...

Application: Volvo FM12 FM D5 D6 D7 D8 D9 D11 D12 D13 This remover is designed to remove the ball joints of front/ rear stabilizer.  Operation: Fi...

Applicable: VOLVO FM12 D13 MACK Size: Dr. 1/2", 6 Points, 74mm Alternative to OEM 9996480 1-D