oem

Max Power - 300 ft/lbs of maximum reverse torque Max Control - New feather touch trigger and one handed forward and reverse control Max Reliabilit...

12 to 1 ratio - increased distance to spot ratio -40 to 932 degrees F, non- contact temperature readings Heavy-duty construction Constant maximum...

Maximum torque: 600 ft./lbs. IR Twin Hammer Mechanism Adjustable power regulator Pressure feed lubrication Time-proven durability and value

Power: Punish the toughest bolts with 1,350 ft-lbs of nut busting torque, powered by Ingersoll Rand’s finely tuned twin-hammer impact mechanism We...

Cold-forged twin hammer impact mechanism and motor deliver 2,000 ft-lbs of Nut Busting Torque, durability, and efficiency Steel hammer case stands...

3/8" Heavy Duty Air Drill With its industrial grade 3/8" chuck, this economical choice includes high quality features for general drilling and hole...

Precision: With an angle configuration that allows easier reach and access with an easy-to-control speed lever, you will be able to use this air d...

Visibility: The green 2236QTIMAX-G impact wrench allows you to see it on the job and in the garage, while customizing your toolbox. Also availabl...

Visibility: The red 2236QTIMAX-R impact wrench allows you to see it on the job and in the garage, while customizing your toolbox. Also available ...

Injector Puller Set for Cummins Drop forged body Two jaw design firmly grips the injector, with sliding hammer The two jaws have heat treatment He...

Injector Remover J-44639 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VIN, plus 200...

Removes clogged or stuck diesel injector seals 1 Kg (2.2 lbs) slide hammer removes the most difficult seals Slide hammer designed with integrated ...

Automatic and manual sensitivity locking Arrow indicates direction to short Signal Distance indicator bar 10 minute auto shut off Ergonomic housing

IPR Injector Pressure Regulator Socket ZTSE4931 Older models use ZTSE4666 Used to remove and install updated IPR valves. Applications: DT 466, 530,...

Easily remove and install the injector pressure regulator in a 2003-2007 6.0L PowerStroke engine. Services Ford Injector Pressure Regulator (IPR)....

This is located in a very tight location Tool is built to bottom out on the hex so it does not put torque on the connector in case it can be reuse...

Designed to remove broken studs, bolts, socket screws and fittings Aggressive left hand spiral design for extra gripping power Spiral flutes are d...

Constructed of high grade heat treated alloy steel for maximum toughness and durability Ideal for tightening, clamping, twisting and turning Turn ...

J-25447-B Remover/Installer Applications: DD60 Detroit Diesel 60 Series

J-33880 Detroit 50 and 60 Series Brass Injector Sleeve Remover & Installer Tool Set For use on brass injector sleeve cups 240-1028, 240-1017, 8...

J-37077 Timing Indicator Light Tool The J-37077 works on Volvo, Mack applications.

J-4209-25 Depth Gauge Holder Application: Detroit diesel series 53, V-53, 71, V-71 and 110 engines Component of J-22273-01 cylinder liner depth gage

J-45299 EN-45299 6492 Engine Preluber Kit Applications: All GM Engines. May require additional adapters, depending on the year and engine. In an ef...

J-45876 Cylinder Pack Liner Puller Remover Tool 5875 Applications: Detroit Diesel 60 Series 12.7L and 14.0L with EGR. MTUS2000 DD13 DD15 DD16 Not...

J-46594 Injector Puller 6779 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VIN, plus...

J-48641 Ring Gear Stopper NI-48641 Required to hold the engine stationary while tightening the harmonic balancer to specs.Use J-44716 or J-50288 on...

JDG1948 John Deere Servicegard Assembly Tool Use to orient and assemble piston spray jet to cylinder block

3400 Peak Amps and 850 Cranking Amps - 12V 1700 Peak Amps and 425 Cranking Amps - 24V Clore PROFORMER battery technology 46" #2 AWG welding cable ...

Will pull balancers on most automobiles Includes 5 sets of side bolts Can be used on flywheels, gears Foreign or domestic vehicles Made in the U.S...

New, improved valve design makes this blow gun more convenient, faster, and easier to use for all applications Comfortable lever control and insul...

KL50000 Counter Bore Re-Conditioning Tool The K-Line 50000 is used to resurface the seat to inlay a shim. No special bases required. The procedure...

KL50001 International/Navistar DT466, DT530, DT570, HT570 Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Co...

KL50003 Detroit Diesel 60 Series Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Counter Bore Re-Conditionin...

KL50004 CAT 3400 Series, C-15, C-16, C-18, C-27, C-32 AND Navistar 15 L Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly fo...

KL50005 Cummins ISX Counter Bore 150MM Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Counter Bore Re-Conditioning Tool ...

KL50006 Cummins NT/NH, N14 Counter Bore Cutter Assembly Tool NOTE: This is only the cutter head assembly for the 50000 Counter Bore Re-Conditioning...

KL50007 International/Navistar Maxxforce 11L/13L (Big Bore) Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 ...

KL50011 CAT C-10,C-11,C-12,C-13 Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Counter Bore Tool Kit.  The ...

KL50012 Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Counter Bore Tool Kit. The KL50012 is the replacemen...

KL50013 Cummins ISX Counter Bore 152MM Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Counter Bore Re-Conditioning Tool ...

Feature a 1/2" square drive 2 9/16" rounded hex locknut socket Can be used with an extension and torque wrench for accurate tightening Works on 19...

Positive proof that a leak is present when the tester fluid changes color Gasoline engine: tester fluid changes from blue to yellow Diesel engine:...

Maximum working pressure of 150 pounds per square inch 1/4" air inlet Offers a tight fit 11.4 standard cubic feet per minute at 100 pounds per squ...

Extra Deep Alloy Steel 1-1/16" Socket Works on 30/36 Spring Brakes on 2016-2017 Freightliner Dump Trucks and Removes Other Types of Clamps and Bol...

For use on vehicles equipped with warning lights 1-7/8 in. overall height for clearance Use with 3/8 in. drive or 1-1/8 in. hex Skin-packed

Fits 1-1/16" switches up to 2-5/8" long, found on newer GM and Chrysler vehicles Fits 1-1/16" oil pressure sending unit (gauge type), found on mos...

Maximum comfort: Anti-Vibration feature reduces tool vibration Maximum power: 15% increase in impact force over standard air hammer product offeri...

A new color for our popular Low Profile Plastic Creeper Comfortable, body-fitting design Urethane rollers are inserted into steel bushings that ar...