ferrum

This is a ISX setting master that is used to zero liner height / depth gage for ISX counter bore cutting.  This part has been ground to establish ...

*** Tool is used with Injector hold down (not included) *** Cummins ISX SOHC Compression Test Adapter Use J-6692-B diesel compression gauge To pe...

Cummins ISX QSX Camshaft Timing and Injector Cam Gear Puller Tool Kit for all Engines 2007 to 2017 Heavy Duty Alternative to OEM 3163021 3163069 31...

Cummins ISX X15 Injector Cam Gear Puller Heavy Duty Alternative to OEM 3163069  Used to pull the Injector and valve cam gears on Cummins engines Ap...

This tool removes and installs the rear crankshaft thick wear sleeve and wet flywheel housing oil seal. Application: ISX & QSX Alternative to ...

Cummins ISX QSX Diesel Truck Engine Front Crankshaft Seal Remover and Installer Heavy Duty Tool Alternative to OEM 3162992 . Cummins ISX QSX Diesel...

4918991 Cummins ISX12 and ISX15 Front Seal & Wear Sleeve Remover & Installer Alternative Applications: CUMMINS ISX12, X15 and ISX15 Replace...

The fixture must be used only to lift, tilt and control the cylinder head during the removal and installation process.  The fixture must not be us...

Cummins ISX12 ISX15 X15 Front Crankshaft Seal and Wear Sleeve Remover Installer 4918991 Alternative . 4918991 Cummins ISX12 and ISX15 Front Seal &a...

This tool is required to rotate the engine when the air compressor drive is removed. Two cap screws are provided with the adapter to be used when ...

3164088 M20060-39 Cam Bearing Adapter Tool Set. This is the cam bearing adaptor set for use on the Cummins ISX/QSX Series including the ISX/QSX 1...

Used to establish fuel pump timing on 15L engines with either the XPI or Next Gen fuel pumps. Application: ISX15 CM2250/SN ISX15 CM2350 X101 QSX15...

This is the cam bearing service adaptor set for Cummins L10/M11/ISM Drive bars must be purchased separately (FEPRO9029) Alternative to M20060-03 ...

The installer is used to align the rear cover plate and install the rear crankshaft oil seal (with or without a wear sleeve). OEM no. ref.: 49197...

The installer is used to align the front cover plate and install the front crankshaft oil seal (with or without a wear sleeve). OEM no. ref.: 49...

The installer is used to align the rear cover plate and install the rear crankshaft oil seal (with or without a wear sleeve). OEM no. ref.: 4919...

TU-15-78 Diesel Compression Test Adapter Tool Cummins ISX SOHC Compression Test Adapter Super Duty Diesel Compression Test Gauge Applications: Cum...

This Cummins barring tool is used to rotate the engine by inserting it into a port located on the bell housing/engine adapter plate. It provides a...

Supersedes 3162986 This kit is used for the removal and installation of the valve spring retainers, valve springs and valve stem seals on Cummi...

To prevent the crankshaft front oil seal from damaged while installing it. Application: DAF 17 TONS (LF55) DAF 17 TONS (CF65) CUMMINS: ISB4.5, IS...

To prevent the crankshaft rear oil seal from damaged while installing it. Application: DAF 17 TONS (LF55) DAF 17 TONS (CF65) CUMMINS ISB4.5, ISB6...

The kit is for valve adjustment process It’s include: (0.5/0.65/0.70/0.75mm) Application: MX13/MX11 Paccar/Kenworth/Peterbilt  OEM no. ref: 2163...

This tool can use with FEPRO1401 to compress the rings and allow the piston to be inserted into the cylinder bore without damage to the ring set o...

This tool can use with FEPRO5901 to compress the rings and allow the piston to be inserted into the cylinder bore without damage to the ring set o...

DD15 DD13 Oil Pressure Gauge Preluber Adapter Tool Alternative  This adapter allows use of the engine oil primer with the Detroit Diesel DD15 and D...

J-47407-128UPD DD13 Cylinder Liner Installer Adapter Alternative Also referred to as J-47407-128 in some manuals. Used with J-47407 or FEPRO7407 ...

This tool can be used with FEPRO1401 to compress the rings and allow the piston to be inserted into the cylinder bore without damage to the ring s...

This tool uses a post that is threaded into the deck of the engine and used as a leverage point to insert the cylinder liners into the block past ...

Detroit Diesel 60 Series 12.7L EGR J-46927 Piston Ring Compressor Remover Installer Tool Alternative Heavy Duty Built  The Detroit Diesel 60 Series...

The camshaft timing tool (W470589062300) has been developed for use with the new camshafts and idler gears. The front timing tool (fork) will no l...

Detroit Diesel DD13 DD15 DD16 W470589004300 Rear Crankshaft Oil Seal Remover and Installer Tool Alternative   This Detroit Diesel Rear Crankshaft O...

Detroit Diesel DD13 DD15 DD16 W470589004300 Rear Crankshaft Oil Seal Remover and Installer Tool Alternative This Detroit Diesel Rear Crankshaft Oil...

Detroit Diesel DD13 DD15 DD16 W470589004300 Rear Crankshaft Oil Seal Remover and Installer Tool Alternative This Detroit Diesel Rear Crankshaft Oil...

This tool is used to assist during piston installation. Ring compressor for use on 50 & 60 series Detroit Diesel non-EGR engines Will NOT work...

Detroit Diesel 60 Series 12.7L EGR 14L MTUS2000 DD13 DD15 DD16 Truck Engine Cylinder Pack Liner Puller Tool OEM Alternative to J-45876 5875  Detroi...

Detroit Diesel 60 Series Engine Rocker Arm Shaft 12MM 12PT 1/2 Inch Drive Extra Deep Socket Heavy Duty OEM Alternative to J-44706 Superseded From J...

Detroit Diesel 60 Series 14L J-46929 EGR Piston Ring Compressor Remover Installer Tool Alternative Heavy Duty Built  Detroit Diesel 60 Series 14L J...

J-46303 Detroit Diesel 60 Series Camshaft Lash Checking Fixture Tool Alternative. Used on DD60 engines. This tool uses an embedded magnet to hold i...

Detroit Diesel 60 Series Crankshaft Alignment Tool J-45947 Alternative This alignment pin tool is used to ensure proper crankshaft alignment while ...

Detroit Diesel 60 Series Cylinder Liner Pack Lifter tool. This tool works on both 12.7L & 14L EGR Engines. This is a direct replacement for par...

Detroit Diesel 60 Series Engines J-35641-A Cylinder Head Lift Bracket Tool Alternative J-35641-A Cylinder Head Lift Bracket Alt. This is a High-Qua...

Detroit Diesel 60 Series 2005-2007 Injector Nozzle Sleeve Tube Remover and Installer Alternative to J-46904 J-48824 for Screw-in Stainless Steel   ...

Detroit Diesel J-46904 60 Series Injector Nozzle Cup Sleeve Tube Remover Installer Alternative Tool for screw-in stainless cups 240-1039 23538840 2...

Detroit Diesel J-48824 60 Series Injector Nozzle Cup Sleeve Tube Remover Installer Alternative Tool for screw-in stainless cups 240-1045 23534745 2...

Detroit Diesel 60 Series Injector Puller Tool J-47372 Alternative Heavy Duty Remover for Inline engines This specially design injector remover is m...

Detroit Diesel 60 Series J-35596-A Cam Gear Lash Adjusting OEM Alternative Tool This J-35596-A Cam Gear Lash Adjusting Tool for 60 Series Detroit D...

Detroit Diesel 60 Series J-35597-A 5874 Cylinder Liner Installer OEM DD60 Tool Alternative   This alternative to J-35597-A and 5874 was manufacture...

Detroit Diesel 60 Series J-35996-A Rocker Arm Lifter OEM Tool Heavy Duty Engine Repair Alternative  3-A