oem

Works on 1994-2003 7.3 diesel engine in Ford 3/4 and 1 ton trucks A complete kit with the tools you need to properly remove and install the rear m...

This tool firmly holds the torsion bar on Ford light-duty trucks while you adjust or service the front suspension Without it, a torsion bar could ...

1/2 in. square drive Use on 1973-81 GM 3/4- and 1-ton trucks Use on 1978-84 ford F-series H.D. 3/4 and 1-ton 4WD trucks Made from high strength st...

Works on 1998 - 2004 Ford F-250, F-350, F-450 and F-550 4 x 4's having the vacuum-operated front axle Correctly installs the seal onto the axle sh...

Works with many domestic vehicles Also works with some Mercedes and Nissan models For pressurizing cooling system Ford/Lincoln/Mercury: Cougar/Thu...

Use to check the size of drill bits, sockets and other items that are either metric or fractional 0-6"/0-150mm range .0005"/64ths/.01mm graduation...

Designed to install frost plugs in liquid-cooled gas and diesel engines found in automobiles, trucks, SUV, agricultural equipment, and constructio...

Designed to remove and install frost plugs used in liquid-cooled gas and disel engines found in automobiles, trucks, SUVs, agricultural equipment ...

Special low-profile design works in close quarters Designed to access the center port on GM fuel tank sending unit For 3/8" and 1/2" applications;...

17 mm Audi A1, A3, A4, A6, A8 Volkswagen Passat BMW N54, N63, S63 21 mm Paccar MX 11, MX 13

Designed to replace fuel line fittings on Cummins ISB and ISX engines The sockets reduce the possibility of fuel leaks and prevent damage to fitti...

Verifies that the camshaft fuel pump lobe is at base circle position before installing the high pressure fuel pump. Tool indicates the pump may be...

This fuel system coupler fitting connects to a "compu-check" quick-connect fitting.  Applications include Detroit Diesel S60, Cummins, Caterpillar...

8 quart capacity 12" total height 9-1/2" diameter 1" OD tip with screen Regular tractor

Range: 2" - 6" Graduation: .0005” Carbide anvils Insulated grip Chrome plated handle

Offset blades are 4" long Includes 26 16 Hardened tempered steel blades The following sizes are: .005, .006, .007, .008, .009, .010, .011, .012...

Gbd 6" (152Mm) 180Sc Flex-Hone GBD 6" (152MM) 180SC FLEX-HONE

Puts the pry bar where you need it for best leverage Exceeds ANSI requirements for proven strength Indexible to over 180 degrees for greater lever...

Fixed Tip Snap Ring Pliers - .090" Straight GearWrench Straight Fixed Tip Convertible Snap Ring Pliers 0.090

This wrench is fully adjustable to fit hydraulic cylinders on vehicles having gland nuts from 1" to 3-3/4" in diameter Also reverses to work on ei...

High visibility orange with raised diamond texture for your toughest applications Size: Large Made of nitrile, chlorinated and latex free Industri...

High visibility orange with raised diamond texture for your toughest applications Size: Medium Made of nitrile, chlorinated and latex free Industr...

High visibility orange with raised diamond texture for your toughest applications Size:  Extra Large Made of nitrile, chlorinated and latex free I...

Use to loosen or tighten injection pump retaining bolts whenever pump timing adjustment or pump service is required Services 1996–1999 GM full-siz...

GM Torsion Bar Unloader Drop forged frame This tool is required to safely release the tension on the front suspension torsion bar to service the f...

Designed with billet bulkhead pins Billet bulkhead pins give greater durability Used on "pressed on" water pump pulleys Used on many 2000 and late...

Made of high quality alloy steel (chrome-molybdenum) Engineered specifically for use with impact tools using the most up to date industrial specif...

Made of high quality steel chrome-molybdenum Engineered specifically for use with impact tools, using the most up to date industrial specification...

Made of high quality steel (chrome-molybdenum) Engineered specifically for use with impact tools, using the most up to date industrial specificati...

Made of high quality alloy steel (chrome-molybdenum) Engineered specifically for use with impact tools using the most up to date industrial specif...

For external lock rings used in truck and tractor transmissions Spring-loaded handles and 2 sets of tips Range: 3" / 75mm OAL: 13" / 33cm

Pulls harmonic balancers, timing gears, & parts having two or three tapped holes Slotted holes in puller body permit cap screws to be position...

Forged jaws with sure-grip teeth grab the filter for easy removal Slip joint ratchet and lock mechanism allows a secure grip on filters ranging fr...

Works on Ford aerodynamic headlights with rear mounted adjusters Comes in skin-pack 4mm hex with roller clutch for infinite settings Replacement H...

Fits filters ranging from 4-1/8" - 4-21/32" (104mm to 118mm) in diameter Features a 1-1/2" wide steel band that can stand up to the high torque ne...

Fits filters ranging from 4-21/32" to 5-5/32" (118mm to 131mm) in diameter Features a 1-1/2" wide steel band that can stand up to the high torque ...

Fits filters ranging from 5-5/32 in. to 5-21/32 in. (131 mm to 144 mm) in diameter Features a 1-1/2 in. wide steel band that can stand up to the h...

Heat treated steel "circlip" pliers for large equipment repair Replaceable tips and spring ratchet locking mechanism to securely hold against snap...

Designed to fit all Class 7 and 8 trucks including a wide variety of drive-lines from Spicer and Meritor Improved material and heat treat on major...

Designed for high torque requirements of truck filters, KTI's heavy duty strap oil filter has a forged steel handle, and extra length, sturdy stra...

Wrenches are designed for high torque requirements of truck filters Designed for use with a 1/2" square drive tool;1-1/2" wide bands for added ...

Measures bonded brake lining from 0 to 1/2" in 1/64" graduations Place gauge over brake shoe to take reading For use with larger hard to remove...

Patented Design allows tool to be mounted to suspension instead of needing to be held by technician during bushing service Specially designed push...

Allows for extra reach, removal and locking of clamps into open position Allows for removal of plastic and/or metal self-tightening hose clamps wi...

Cuts flexible hose up to 1-1/4" This hose cutter will clearly cut heater hoses, fuel lines, and other types of flexible hose up to 1-1/4" The stai...

Manufactured from heat treated chrome molybdenum steel for additional strength and durability Transfers the pressure from the thinnest part of the...

Maximum torque: 1,770 ft./lbs. New Fast-Torque feature delivers 1,000 ft./lbs. in 2 seconds New increased pressure rating can withstand 120 PSI fo...

Jumbo hammer mechanism Up to 1,100 ft./lbs. of torque Trouble-free, longer performance aided by the Pressure-Feed Lube System Compact and only 8.8...