ferrum

Used to remove injector from engine head. Applications: MBE 900 & MBE 4000 Alternative to J-46381 J-46186 904-589-00-07-00 15-B

For screw plug removal and installation on fluid reservoir on condenser Also used for front wheel plastic cover. Application: BENZ (W203/W209) ...

When install or removing the pinion nut , use this tool to achieve proper torque specifications and stake the nut to the pinion Torque Spec for fr...

MH062677 Fuso Rear Oil Slinger Installer Alt For Slinger ME017240 Applications Include:  FE-HD, FE-SP, FE-SP640, FE84, FE85D, FE120, FE140...

MH063969 99360615 Cranking Shaft Locking Pin Alternative Applications: FUSO EURO 5 lift cars/IVECO engine Used for aligning the crankshaft timing p...

This tool is designed for removing the injector.  Application: IVECO DAILY F1C ENGINE (EURO 5) / FUSO LIFT CARS(EURO 5) Models: DAILY M.Y.200...

Used to remover and install injector sleeve ME302359 Application: MITSUBISHI 6M60 engine  16-A

Step 1: Place the cylinder head on a flat and clean surface. Make sure that the cylinder head is not scratched when the valves are removed. Step 2:...

OTC 8005 Male 3/8"-16 Female 5/8"-18 Threaded Adapter 8B-7557 Alt For use on the ends of Push Puller legs or forcing screws when pulling shafts, be...

Includes J-35637, J-39697, J-42665, J-42749, J-45002, J-1853, J-1242, 5870, 3350 Alternatives Applications: Size Series Engine Year 78.2mm 60 DDEC...

This tool is used to properly hold the cam gear stationary while removing/installing the cam gear retaining bolt without damage.  The tool install...

Paccar Engine Barring Tool MX 13 MX 11 Engines Peterbilt and Kenworth T880 Trucks Alternative to 1903018 1/2" Drive Flywheel Crank Turning Tool Rep...

For the Paccar MX 13, required to install pistons in liners with carbon scraper rings. Application: MX-13  Alternative to 1809912 6-D

1453158PE Engine Cranking Flywheel Tool 1453158 Applications: 2011 to 2016 Kenworth and Peterbilt with engines PACCAR MX PACCAR MX PMCI-2 PACCAR ...

Design for install cylinder liner  Application: PACCAR MX13 liner press Alternative to M50161 6-C

This tool kit is to remove & install the injector sleeve from Paccar MX-13 engine with Engine Head Off Application: MX-13(CF85/XF105) Alterna...

Paccar MX MX PMCI-2 MX13 PCI MX13 Engine Front and Rear Crankshaft Seal Installer Heavy Duty Diesel Set Alternative to OEM 1453185PE 1453185 Oil Se...

With this tool, you can install the oil seal without damaging the oil seal or parts. Suitable for DAF CF 85, 35-43 ton, Euro 4/5 Oil seal OEM no.:...

To prevent the crankshaft rear oil seal from damaged while installing it Suitable for DAF CF 85, 35-43 ton, Euro 4/5, MX13 Oil seal genuine no.: 1...

Special design of cone tool make piston ring into cylinder sleeve easily Used to guide the piston into the cylinder sleeve during piston installat...

Application: DAF XF105 MX13  Tool for removing/installing PACCAR MX 13 injector sleeves from the cylinder head while engine head is on the tr...

Lisle spring clutch eliminates ratchet problems Assures a proper fit on the piston and a positive locking action Range 3-1/2" to 7". (Height 3-1/2")

Kit Includes  FEPRO0386 - PITMAN ARM SPREADER ALTERNATIVE TO TG 10386 FEPRO0388 - INTERMEDIATE PITMAN ARM PULLER ALTERNATIVE TO TG 10388 FEPRO0389 ...

Pitman Arm Puller is designed to remove pitman arms on Sheppard M100 gearboxes. Eliminates dangerous hammering and cutting torch methods. May be us...

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

PowerPull 6" Oil Seal Extractor w/ Slide Hammer The Oil Seal Extractor removes oil seals, plastic dip sticks, and glow plug seals, along with many ...

PT-2200-72A 3823373 903 NH 5-1/2 Cummins Cutter Plate Assembly Tool Alternative  Works with MI-PT-2200-6 cutter bit 19-D

PT-2200-93 PT-2200-6 Alternative Shim Cutting Bit Tool  Shim cutter bit with traction grooves. Used with PT-2250-B 19-D

PT-2200-95 ZTSE25144-A DT466 DT530 Counterbore Shim Cutter Plate & Bit Tool Alternative Navistar with 4.589 Bore. Includes AM-PT-2200-93 Cutter...

PT-2210-1A Plate Alternative and Hardware for PT-2210-AThis tool kit that can be used as a replacement base plate and hardware kit for your FEPRO01...

PT-2210-3A Cutter Plate Assembly for Mack E-7 Alternative  10-B

*** Metal Case Included*** PT-2210-A 50134 Alternative Caterpillar Cummins Mack Lower Ledge Counterbore Tool Kit  Used to resurfaces the lower ledg...

PT-2250-B Diesel Counter Bore Tool Alternative  AM-PT-2250-B is for cutting the cylinder liner collar (shims). Counterbore tool upper deck for shim...

PT-2400-13 CAT Counterbore Shim Cutter Plate Tool Alternative  Used with PT-2250-B Cutter Bit Included Applications: 4.75 3306 3304 D330 D330C D33...

PT-2400-15A 9U-7991 Alternative Cutter Plate Assembly Tool Used with PT-2250-B For Caterpillars with a 5.4" bore. 3406, 3408 and C15. *** Blade inc...

PT-7020 3822736 5120-01-262-7316 Alternative Cummins 5.5" Piston Ring Compressor Tool  This will work on all 5.5" bore such as N14 and 855 Cummins

Replacement Bolt Spreader Assembly for Alternative J-45876 Cylinder Pack Liner Puller Remover Tool  J-45876 also sold: FEPRO5876.  5-E

Replacement O-Rings for 14L Sleeve Puller (FEPRO5876) Set includes 3 O-Rings G1A

Used to remove / install mainshaft assembly into the transmission main case. Alternative to OEM RR1004TR 17-B

Attach the RR1006TR Lifting Bracket to the top of the Auxiliary Section, and attach the chain of the Lifting Device to the Bracket Use with cha...

RR1009CL 2.00" Clutch Alignment Shaft / 14 Spline Eaton Road Ranger Used to align clutch disks during clutch installation. Size: 2,00" - 14 spline,...

The tools is used to push the countershaft assembly rearward to create clearance for bearing puller on FR & RT-series transmissions Alternativ...

Used with hand maul (FEPRO9127) to remove parts from the transmission. Alternative to RR1020TR 17-A

Removes input bearing for FR & RT-series transmissions. Alternative to RR1023TR Eaton Roadranger Puller for Input Bearing Sold in Bundle FEPR...

Eaton Roadranger Puller for Input Bearing Removes input bearing for FR & RT-series transmissions. Alternative to RR1023TR RR1005TR Alternati...

Install the Input Shaft Pilot Bearing Wear Sleeve Puller over the flats on the Pilot Bearing Wear Sleeve.  Tighten the 13 mm jackscrew on the...

2 Qty RR1063TR-3 Alignment Pins 4 Qty RR1063TR-4 Stand-off Bolts

*** Blue Box Included*** RR1064TR Alternative Eaton Clutch Alignment Tool Application: Eaton Endurant HD Automated  1.     EEO-14F112C 2.     EEO-1...