Ferrum

J-47411 Compressor Test HDE Adapter ( 5/16 NPT Fitting ) This tool is used with the previously release compression test gage to compression test or...

J-47450-1 Cam Gear Aligner Tool Sold in Kit FEPRO4514 

J-47450-1 & J-44426 Cam Gear Aligner Tool  Sold in Kit FEPRO4514  1-A

High quality stainless steel tank eliminates corrosion and holds up to 3 gallons Heavy duty hand pump assembly provides smooth operation and long ...

J-54402 Injector Puller Tool NI-54402 Alternative This is a High-Quality Aftermarket Tool!  Applications: Titan XD 5.0L Cummins: 2016, 2017, 2018...

John Deere JD-49 JD-53 JD-203 Alternative Clutch Alignment Tool Application: 3010, 3020, 4000, 4010, 4020, and 4320The clutch alignment tool or pil...

JD227 Alternative Pressure Plate Gauge Tool  The JD-227 Clutch adjusting gauge with current modifications is used to adjust the engine clutch press...

JD254A Timing Tool John Deere 4039 4045 6059 6068 Servicegard Alt Works on the 4039, 4045, 6059 and 6068 engines. Supersedes JD254 10-A

JD258 Alternative Seal Installation Pilot Tool  Used to assist in installing carbon stop seal on fuel injector nozzle Applications: John Deere Powe...

JD264 Alternative Clutch Adjusting Gauge Tool  This tool is used to adjust the steering clutch pressure plate fingers. Used on the steering clutch ...

Includes Alternative to JDG467 and JDG468 Use on 6081, 6090, 6466 and 6619 engines Used to install Front Wear Sleeves 9-B

JDE32 Alternative John Deere Servicegard Clutch Finger Adjusting Gauge Tool  Use to adjustment of clutch fingers G2C

JDE38B Alternative Slide Hammer Fuel Injection Nozzle Puller Tool  This tool is used to remove pencil-type fuel injection nozzles Applications incl...

JDE51 Alternative John Deere Clutch Adjusting Tool Clutch tool to adjust transmission clutch release levers and PTO clutch operating levers. G2D

JDE61 Clutch Adjusting Plate Tool John Deere Servicegard Alt This tool is sometimes used with JDE52A Applications: 3010, 3020, 4000, 4010, 4020, 43...

Used to locking the flywheel on engines Application : 4024, 4039, 4045, 4239, 4276, 6359, 6619, 6059, 6068, 6076, 6081, 6090, 6105, 6125 and 61...

JDE92 Injector Socket Tool John Deere Servicegard Tool Alt Special service tool - Use on 3029, 4039, 4045, 6059, 6068, 6076, 6081, 6101, 6466 and 6...

JDG10014 Alternative John Deere Servicegard Electronic Injector Sleeve Removal Tool  Use to remove the electronic injector sleeve from the cylinder...

JDG10246A Alternative Cam Timing Pin Tool  Use to lock engine at top dead center (TDC) and to adjust unit injector preload - tool fits notches on...

JDG10357B Alternative John Deere Servicegard Front Seal Remover and Installer Tool  Use to remove and install the viscous damper assembly and cran...

JDG10539A Alternative John Deere Servicegard Coolant Tank Adapter Tool  Use to pressure test the engine cooling system. Use with D05104ST. 9-A

JDG10544 Alternative John Deere Servicegard Seal Remover Tool  Used to remove the front seal wear sleeve 9-B

JDG10549 Front Oil Seal Installer Tool  Used to install the front oil seal Note: Customers report this tool working with seal #'s DZ123164 and RE53...

JDG10576 Alternative Engine Barring Tool  Works on Powertech engines Use to rotate engine for service, setting valves, and locating top dead center...

JDG10631 Alternative Sleeve Puller Tool  Use to remove an existing electronic injector sleeve from the cylinder of the 9.0L diesel engine. Applica...

JDG10997 Alternative Rear Crankshaft Seal Installer  Use this tool if you're working on a 9.0L PowerTech engine. Use FEPRO476JD for teflon seals (s...

JDG11004A Alternative Front Crankshaft Oil Seal Installer  Superseded from JDG11004 This tool is used to install and accurately align the seal on t...

JDG11200 Drive Clutch Puller Tool Alt Use to remove UTV Team Clutch from Tapered Shaft by screwing tool into drive clutch. Works on serial numbers ...

JDG1184 Alternative EUI Nozzle Sleeve Replacement Set  For replacement of electronic unit injector nozzle sleeves with cylinder head installed on 6...

JDG1253 Alternative John Deere Servicegard Ring Gear Hub Retaining Socket Tool  9-C

JDG1255A Alternative John Deere Servicegard Slinger and Seal Installer Tool  Use to install slinger and seal  Replaces JDG1255 9-C

JDG1515 Alternative Fuel Injection Nozzle Tool Kit John Deere Servicegard  Used to remove the injectors from Powertech engines 4.5L and 6.8L or Mod...

JDG1556 John Deere Servicegard Driver Disc Tool AlternativeUse to install bearing cups into wheel hub Ensures precise, damage-free seating of beari...

JDG1559 John Deere Stanadyne Injection Pump Timing Tool Alternative  Use for static lock pin timing during installation of the injection pump. G2D

JDG1641 Alternative Clutch Removal Screw Tool Use to remove UTV Comet Clutch from Tapered Shaft by screwing tool into drive clutch. Works on serial...

JDG1649A Alternative Sleeve Installer Tool  Use to properly install injector sleeve into cylinder head *** CYLINDER HEAD MUST BE REMOVED TO USE THI...

JDG1923A Crankshaft Adapter Alt Replaces JDG1923 Used with JDE81-1 or JDE83 Flywheel Rotating Tool and JDG1571 or JDE81-4 Timing Pin. Use for in-fr...

JDG1952A Alternative 9.0L Rear Wear Sleeve and Seal Installer Tool  This tool works on 9.0L PowerTech Engines Used with FEPROJD1953 and JDG1954 9-B

JDG1952A JDG1953 JDG1954 Alternative John Deere Seal & Wear Sleeve Installer Tool Kit  This tool works on 9.0L PowerTech Engines Includes Alter...

JDG1953 Alternative 9.0L Rear Seal Housing Alignment Tool  This tool works on 9.0L PowerTech Engines Used with JDG1952 and JDG1954 9-E

JDG1954 Alternative 9.0L Alignment Tool  This tool works on 9.0L PowerTech Engines Used with JDG1952 and JDG1953 9-C

JDG2047A John Deere PowerTech 4.5L 6.8L Engine Compression Test Adapter Tool Alternative Used to test cylinder compression through the injector por...

JDG2073 Alternative John Deere Servicegard Measuring Tool  Applications include 2.4L John Deere Use to transfer measurement of front and rear posit...

JDG2074A Alternative John Deere Servicegard Damper Puller Tool  Used to pull damper from tapered crankshaft nose 9-D

JDG300 Alternative 6619 & 6531 Rear Crankshaft Wear Sleeve & Teflon Seal Installer John Deere Servicegard Tool Works on 6531 and 6619 engi...

JDG405 Alternative John Deere Servicegard Camshaft Bushing Service Set  Use to remove and install the camshaft bushings Use with D01299AA, D01300AA...

JDG476 Alternative Rear Crankshaft Seal Installer Includes equivalent to: John Deere Servicegard JDG477 JDG478Use this tool for teflon seals (such...

JDG720A Alternative Front Crankshaft Oil Seal Installer Tool John Deere Servicegard  For use on 6081 and 6090 engines. Use to install front cranksh...