OEM

4-1/8" 8 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of high-...

4-13/16" 8 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of hig...

4-3/8" 6 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of high-...

4-3/8" 8 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of high-...

4-7/8" 6 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of high-...

SuperKrome® finish provides long life and maximum corrosion resistance SureGrip® hex design drives the side of the fastener, not the corner Made i...

Can be driven with a 1/2" breaker bar from the end, create your own handle Also has standard 3/8" drive on top of tool for use with a ratchet Neck...

1/2" drive x E24 external star impact socket Made from high quality chrome-molybdenum steel Heat treated for strength and durability Size markings...

Extra thin wall deep length impact socket for removing/installing transmission and differential and yoke locknuts* on a wide variety of trucks Bec...

Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has a j...

For tubes, bores and valve-guides 9" length for hard-to-reach applications 8 sizes: 1/8", 5/32", 13/64", 1/4", 5/16", 3/8", 7/16" and 1/2“ Durabl...

Step Plate 205-D015 D80L-630-4 8060 Part of 205-DS011 Outer Dimension 1 3/8", Inner Dimension 1 1/8". Automatic Transaxle/Transmission Reference M...

Ideal all-around power source develops 10,000 PSI at 100 PSI air Internal relief valve Two stage release mechanism Pump, hold, or release load wit...

Operates with any electric drill Adjustable stop collar permits quick selection of two range settings, from 2" to 4" and from 4" to 7" Stainless ...

Powerful motor delivers .33 HP and 25,000 rpm free speed Lightweight, ergonomic composite housing helps prevent "freezing" and offers greater oper...

Great for limited access fasteners Forged from CR-MO alloy steel - the best choice for strength and durability Radius corner design to extend the ...

Used in pairs for supporting trucks, trailers, and equipment in fleet garages, agricultural, industrial and construction environments. Four leg st...

Pitman arm can be removed while steering gear is on vehicle 3-1/4" spread handles the large pitman arms Robust desgn for durability and strength 2...

Strong but flexible Specifically engineered sizes designed for small round connector types Diameter sizes range from .030" to .120" and 5" lo...

Waterproof Super White Metal Marker

4.125 - 4.5 (104.7 - 114.3mm) range fits most tractors and other farm implement products Tough, stainless steel band with permanently bonded textu...

2.875 - 3.25 (73 - 82.5mm) range fits a common smaller filter size found on many domestic and foreign vehicles Tough, stainless steel band with pe...

3.5 - 3.875 (88.9 - 98.4mm) range fits most popular 3.625 standard filters Tough, stainless steel band with permanently bonded textured coating fo...

Accommodates a 1/2" drive impact wrench Services GM, Ford and Chrysler built 1-ton 2WD and 4WD trucks Also works on medium-duty Class 2 through Cl...

Convenience: This tool does not have to be "turned down" after use Speed: Innovative torque mechanism requires only fingertip force to adjust. Dur...

For all torque-to-yield fastener applications Commonly used for tightening head bolts and other bolts where a torque angle is required Use with 1/...

Large 3-1/2" gauges feature a chrome bezel and rugged protective outer boot High pressure gauge reads 0-400 psi and 0-2800 kPa Low pressure gauge ...

Removes end yokes from 1600/1610-1810 series transmissions Puller device delivers 10 tons of mechanical power of essential force for working on bi...

Pneumatic bushing driver set removes and installs truck and trailer 1-3/8" anchor pin bushings and stuck anchor pins. Includes an 11-1/2" long dri...

Easily connects rear drum brake return springs Easy one hand operation Slotted ends on tool always hold spring at correct work angle No need to le...

Designed for use on heavy duty single, two-plate, push/pull, manual, and self-adjust clutches Shaft is constructed of lightweight fiberglass-reinf...

Designed for use on heavy duty single, two-plate, push/pull, manual, and self-adjust clutches Shaft is constructed of lightweight fiberglass-reinf...

1-3/4 in. O.D., 1 in. Pilot Constructed of a lightweight fiberglass-reinforced nylon body that won't hang up in the clutch disc splines Designed f...

Fits the Most Popular Size Seals for Class 7 and Class 8 Trucks The driver is designed to hold the seals to make installation easier Includes five...

Designed to withstand the force of a 3/4" drive impact wrench This rugged socket makes truck tie-rod end removal quick and simple Works on inner a...

Extra long reach 14" dual head chuck with internal lock on threads inflates in both straight and offset positions Easy to read, dual calibrated ...

Heavy duty thrust bearing won't damage new threads Fits truck studs up to 22mm or 7/8" Installs truck studs in seconds Use with an impact wrench o...

TU-15-42 3116 Compression Test Adapter Injector adapter with quick disconnect for Caterpillar 3116 engines. Used with J-6692-B Compression Test Gauge

TU-15-43 Diesel Compression Test Adapter Tool Used with J-6692-B, 303-D092, AM-303-D092, or J-26999 Compression Test Gauges Injector adapter with q...

TU-15-44 3126B, 3126E & 3126D Compression Test Adapter Used with J-6692-B, 303-D092, AM-303-D092, or J-26999 Compression Test Gauges Injector a...

TU-15-46 Diesel Compression Test Adapter This adapter works on 3176B, 3176C, 3196, C10, and C12 engines. Used with J-6692-B Compression Test Gauge

TU-15-49 3406E C15 C16 Diesel Compression Test Adapter  Injector adapter with quick disconnect for Caterpillar 3406E, C11, C13, C15, C16, C18, C27 ...

TU-15-84 C7 ACERT Compression Test Adapter Tool Diesel Compression Test Adapter for Caterpillar C7 ACERT engines 2008-present Used with J-6692-B Co...

**Easily remove tough grease, oils and dirt with this heavy duty hand cleaner**Removes Tough Grime, Without WateHand cleaner features a pumice-fre...

Handle telescopes from 5-1/2" to 25-9/16" This is the ideal tool to retrieve dropped metal objects when working in hard to reach areas Chrome hand...

This tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...

Quickly restore threads to near new condition without expensive thread cutting equipment. Replaceable V-Pads and dies. Use for 1-1/4” to 5” O.D IN...

Built to support the latest protocols (CAN FD, DoIP), and with the compatibility for a wide range of OEM diagnostics software Designed for flexib...