PACCAR

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems 8 ...

 This high quality base has a very strong magnet (50-lb force) which can mount to flat or round surfaces at any angle firmly and is easily activat...

Fits Most Class 8 Over the Road Trucks and Trailers and Some Medium Duty Trucks. Use the tapered driver side for bearing races and the flat side fo...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems. 6...

Eliminates airlocks and refills entire cooling system in seconds including heater core without the time consuming process of bleeding and purging...

Works on OEM electrical connectors used on trucks and equipment such as Caterpillar, Kenworth, Peterbilt, Freightliner, Mack and more Also used on...

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

PT-6410-5 PT-6400-C to ZTSE2536 Conversion Kit Alt Converts PT-6400-C to ZTSE2536.  Includes High-Quality Aftermarket Alternatives of: 2x PT-6410-...

This tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...

17 mm Audi A1, A3, A4, A6, A8 Volkswagen Passat BMW N54, N63, S63 21 mm Paccar MX 11, MX 13

All metal wrench to remove and install bowls on newer Paccar Chassis Mounted Fuel Filter Assemblies Half-moon design allows easier access to the f...

1629459 Alternative MX-13 Injector Sleeve Remover and Installer (Head On) FEPRO9459 Remover and Installer (Head Off) FEPRO9083 G1B

09310 Chadwick & Trefethen Carbon Straight LP Reamer Size 31 Adjustment Range : 1 7/16" - 1 5/8" 1.437 - 1.625 ** Replacement Carbon Steel ...

Used to install and remover rear crankshaft seal  Alternative to 1903058  Oil seal no. ref.: 1923380 Application:  Euro 6 / MX-11 ***  So...

1453158PE Engine Cranking Flywheel Tool 1453158 Applications: 2011 to 2016 Kenworth and Peterbilt with engines PACCAR MX PACCAR MX PMCI-2 PACCAR ...

This tool is to properly diagnose and assist in repairing the PACCAR fuel system.  Application: MX-11/MX-13, PACCAR ENGINE/EPA10/EPA21 Alternati...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems...

09300 Chadwick & Trefethen Carbon Straight LP Reamer Size 30 Adjustment Range : 1 1/4" - 1 7/16" 1.250 - 1.437 ** Replacement Carbon Steel ...

Safely and efficiently removes virtually all Haldex self-adjusting slack adjusters including left offset, right offset and standard elongated arm d...

Provides fast and effective removal and installation of even the most seized wheel studs. Remove and install 10 studs in only 10-15 minutes. Elim...

Found on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines Fits Davco Fuel filters 382 and 384 Dura...

This tool is to properly diagnose and assist in repairing the PACCAR fuel system.  Application: PACCAR MX11 MX13 CF E6 CS CF F7 BH MX EPA10 EPA13 ...

***Box Included*** Fully adjustable pulling arms and stud adapters are quick and easy to install Includes following Adapter set: 5/8” – 18 Axle St...

Alternative to TG16002 Alternative Brake Anchor Pin Press Tool  Safely and easily remove brake anchor pins and bushings on virtually all 16-1/2” S...

The SPL Bearing Cap Installer was designed to be as simple as possible. Pre-determined “installed heights” specified by the manufacturer have been...

Both, safely and efficiently removes virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters. It is simple to slip on for instant r...

Fits the Most Popular Size Seals for Class 7 and Class 8 Trucks The driver is designed to hold the seals to make installation easier Includes five...

Used for the internal adjustment of Spicer angle-spring and multiple-lever clutches Until now, a pry bar or other makeshift method was used and of...

Used to install and remover front and rear crankshaft seal  Alternative to 1903058  Oil seal no. ref.: 1923380 1923376 Application:  Euro 6...

The Slack Adjuster Puller is easy to use, as it makes it simple to slip on for instant results, saving each mechanic and technician time and labor....

Two 5/8" - 11 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

Use for remove the diesel particulate filter  Engine : MX-11/MX-13 Vehicle : DAF CF/XF/XG/XD/TATRA PHOENIX/SOLARIS URBINO Alternative to 21...

Used to install and remover front crankshaft seal  Alternative to 1903058  Oil seal no.ref.:1923376 Application: Euro 6 / MX-11 6-B ***  ...

Both safely and efficiently removes virtually all Rockwell self-adjusting slack adjusters. It is simple to slip on for instant results, saving each...

This tool is to properly diagnose and assist in repairing the PACCAR fuel system.  Application: MX-11/MX-13, PACCAR ENGINE/EPA10/EPA21 Alternati...

Two 1/2" - 20 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

Two 9/16" - 18 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

Two 3/4" - 16 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

Two 1/2" - 13 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

Install two bearing caps in one procedure on virtually all medium and light-duty u-joints An encased magnet is utilized for installation, retaining...

For use with 1/2" ratchet or breaker bar Works on 1990-93 Dodge trucks with Dana 60 manual hubs Also available as part of 4542 7-Piece Wheel Beari...

Patented Design allows tool to be mounted to suspension instead of needing to be held by technician during bushing service Specially designed push...