PACCAR

Universal Heavy Duty Diesel Cylinder Liner Puller Alternative to PT-6400-C and 3376015. This tool works on WET LINERS ONLY with a 3-7/8 to 6-1/4 bo...

The kit is for valve adjustment process It’s include: (0.5/0.65/0.70/0.75mm) Application: MX13/MX11 Paccar/Kenworth/Peterbilt  OEM no. ref: 2163...

Paccar Engine Barring Tool MX 13 MX 11 Engines Peterbilt and Kenworth T880 Trucks Alternative to 1903018 1/2" Drive Flywheel Crank Turning Tool Rep...

To prevent the crankshaft rear oil seal from damaged while installing it Suitable for DAF CF 85, 35-43 ton, Euro 4/5, MX13 Oil seal genuine no.: 1...

Special design of cone tool make piston ring into cylinder sleeve easily Used to guide the piston into the cylinder sleeve during piston installat...

Cummins 3.9L, 5.9L, & 6.7L Front Cover Crankshaft Seal Installer Tool Directly replaces OEM 3824498 Designed to properly place the crankshaft ...

Application: DAF XF105 MX13  Tool for removing/installing PACCAR MX 13 injector sleeves from the cylinder head while engine head is on the tr...

This is a replacement set of 2 thick feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6400-9A Minimum thickness of .2...

Pitman Arm Puller is designed to remove pitman arms on Sheppard M100 gearboxes. Eliminates dangerous hammering and cutting torch methods. May be us...

Universal Cylinder Liner Puller PT-6400-C M50010-B 3376015 ZTSE2536 PT-6410-B 5P-8665 OEM Alt for Mack Cummins Caterpillar Detroit Diesel Volvo Int...

This tool installs the wear sleeve and FEPRO1766 installs the seal. If installing seal & wear sleeve kit 3802820 for example, you'll need both ...

3163054 3165093 Alternative Cummins Camshaft Gear Remover/Installer ToolApplications: Cummins / PaccarB3.9 B5.9G QSB 5.9 6BT ISB 5.9 6.7 6CT C8.3 C...

For the Paccar MX 13, required to install pistons in liners with carbon scraper rings. Application: MX-13  Alternative to 1809912 6-D

With this tool, you can install the oil seal without damaging the oil seal or parts. Suitable for DAF CF 85, 35-43 ton, Euro 4/5 Oil seal OEM no.:...

This tool kit is to remove & install the injector sleeve from Paccar MX-13 engine with Engine Head Off Application: MX-13(CF85/XF105) Alterna...

Paccar MX MX PMCI-2 MX13 PCI MX13 Engine Front and Rear Crankshaft Seal Installer Heavy Duty Diesel Set Alternative to OEM 1453185PE 1453185 Oil Se...

1629459 Alternative MX-13 Injector Sleeve (Set of 6) Remover and Installer (Head On) FEPRO9459 Remover and Installer (Head Off) FEPRO9083 G1B

This works on X15, Cummins B & C series 5.9L & 6.7L diesel engines and Paccar PX-8 engines.  Alternative to 5299073 3824591A 3824591 7471B ...

This is a replacement set of 2 thin feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6410-4A Minimum thickness of .14...

Designed to fit all Class 7 and 8 trucks including a wide variety of drive-lines from Spicer and Meritor Improved material and heat treat on major...

This tool is used to install king pin bush. Applications: K80A K120A  Alternative to ST70-30 Pin Length: 9.23 Pin Diameter: 1.771 10-D

Design for install cylinder liner  Application: PACCAR MX13 liner press Alternative to M50161 6-D

Adjustable jaws with locking feature to suit both hexagon & octagon wheel bearing lock nuts Includes three sets round & three sets square ...

This tool is used to install king pin bushing Applications: K160A  Alternative to ST70-31 Pin Length: 9.75 Pin Diameter: 2.125 10-D

Application: 2011 to 2016 Kenworth and Peterbilt with engines PACCAR MX, PACCAR MX PMCI-2, PACCAR MX-13 PCI and PACCAR MX-13. Seal number referenc...

Alternative to OEM 9996672 Stainless steel (Dr. 1/2") (100-110mm) (3.93-4.33IN) Extra wide 3" Super Duty Band for better grip and reduced canister...

09320 Chadwick & Trefethen Carbon Straight LP Reamer Size 32 Adjustment Range : 1 5/8" - 1 7/8" 1.625 - 1.875 ** Replacement Carbon Steel B...

+ Additional Adapters Suitable for a wide variety of applications on kenworth truck Easily remove the threaded bush from spring eye Application :...

(Dr.1/2") (110-125mm) (4.33-4.92IN) Extra wide 3" Super Duty Band for better grip and reduced canister damage For use with larger hard to remove o...

Pressure rating 10000 psi Oil capacity 98 cubic inch 3/8-18 NPT oil port Unit requires 9 cfm of air at 100 PSI (at the pump) 2510A Alternative  *...

Extra wide 3" Super Duty Band for better grip and reduced canister damage For use with larger hard to remove oil filters For use with a 1/2 inch s...

Applications include Paccar PX-6, PX-8, 1989 & Newer Cummins 4BT 3.9L, ISC 8.3L, B Series 5.9L, ISB, ISL 5.9L 6.7L, QSB 5.9L 6.7L and ISL9 L9...

This special driver is used to install the crankshaft front oil wear sleeve as required to repair crankshafts that have grooves in the crankshaft...

Application: Commonly found on class 3-5 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR etc.)  Easily remove...

Material: CR-V socket with satin & bright chrome plated, S2 bits with manganese phosphate  Contents:  18- 1/4" Dr.         5- Star-E: E4-5-6-...

***Box Included*** Fully adjustable pulling arms and stud adapters are quick and easy to install Includes most common 5/8” – 18 Axle Stud Adapter ...

1453185PE 1453185 Alternative Front & Rear Crankshaft Seal Installer & Remover Tool Includes special punch tool T00112-4 / 2178349 to assis...

Application: 2011 to 2016 Kenworth and Peterbilt with engines PACCAR MX, PACCAR MX PMCI-2, PACCAR MX-13 PCI and PACCAR MX-13. Seal number referenc...

Kit Includes  FEPRO0386 - PITMAN ARM SPREADER ALTERNATIVE TO TG 10386 FEPRO0388 - INTERMEDIATE PITMAN ARM PULLER ALTERNATIVE TO TG 10388 FEPRO0389 ...

3824078 5395259 2063800090 Cummins Rear Crankshaft Seal & Wear Sleeve Installer Tool Alternative Applications include Paccar PX-6, PX-8, 1989 &...

Application: Commonly found on class 6-8 transportation trucks and equipment. (Kenworth, Peterbilt, Freightliner, Mack, Volvo, etc.)  Easily remov...

Universally suitable for the coupling nut of the high pressure fuel line of passenger cars and trucks, such as DAF XF/ CF with Euro 6, MX11/ MX13 ...

Step 1: Place the cylinder head on a flat and clean surface. Make sure that the cylinder head is not scratched when the valves are removed. Step 2:...

09330 Chadwick & Trefethen Carbon Straight LP Reamer Size 33 Adjustment Range : 1 7/8" - 2 3/16" 1.87 - 2.187 ** Replacement Carbon Steel B...

This tool is to properly diagnose and assist in repairing the PACCAR fuel system.  Application: PACCAR MX11 MX13 CF E6 CS CF F7 BH MX EPA13 EPA17 ...

09260 Chadwick & Trefethen Carbon Straight LP Reamer Size 26 Adjustment Range : 13/16" - 7/8" 0.812" - 0.875" ** Replacement Carbon Steel B...

This tool is to properly diagnose and assist in repairing the PACCAR fuel system.  Application: PACCAR MX11 MX13 CF E6 CS CF F7 BH MX EPA13 EPA17...

***Box Included*** Torque multiplier can turn small amounts of input torque into large output torque to loosen the toughest threaded fasteners whi...