MACK

14pc Jake Brake Tool Set for Engine Intake and Exhaust Valve.  Alternatives to 88880052, 85111377 and 88880053  Used on intake and exhaust valve a...

  Volvo and Mack Stainless Steel or Brass Injector Sleeve Cup Nozzle Tube Remover and Installer Tool Kit for D11 D12 D13 D16 FM12 Truck MP7 MP8 MP...

Leaf Spring Socket Master to Remove and Install threaded leaf spring shackle pins on International, Peterbilt, Western Star, Volvo, Mack Kenworth ...

88880052 2pc Feeler Gauge Tool Set Applications: Volvo Mack Part of 88880053 Used for engine brake rocker adjustment with or without shims. In...

Supersedes 9998265 and 9998531 Applications: Volvo D13, Mack MP8 Fits Piston 131 Diameter  Alternative to OEM 88800314 2-D

Designed to fit all Class 7 and 8 trucks including a wide variety of drive-lines from Spicer and Meritor Improved material and heat treat on major...

Used On Most CAT, Cummins and Detroit Diesel Engines (Class 7 and 8 Trucks). The double-sided centering bushing guides the seal driver so that sea...

Adjustable jaws with locking feature to suit both hexagon & octagon wheel bearing lock nuts Includes three sets round & three sets square ...

Application: Commonly found on class 3-5 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR etc.)  Easily remove...

Material: CR-V socket with satin & bright chrome plated, S2 bits with manganese phosphate  Contents:  18- 1/4" Dr.         5- Star-E: E4-5-6-...

When installing the oil seal, you won't damage the oil seal. With this tool kit your repair be more convenient and easier. Use this tool AND AM...

Alternative to OEM 9996672 Stainless steel (Dr. 1/2") (100-110mm) (3.93-4.33IN) Extra wide 3" Super Duty Band for better grip and reduced canister...

Check fuel system pressure on diesel engines with a Compuchek test port Fits Compuchek test ports on Cummins diesel engines as well as other diese...

AM-J-37716-B Mack Rear Crankshaft Seal/Wear Sleeve Installer Applications: MACK E-6 and E-7 / E-7 ETECH Works on the following seals: MACK - 2550...

This Mack KingPin Removal Set will make life easier when working on Mack trucks. Quickly remove and install Mack kingpin caps on 10,500, 12,000, 16...

Application: Commonly found on class 6-8 transportation trucks and equipment. (Kenworth, Peterbilt, Freightliner, Mack, Volvo, etc.)  Easily remov...

Extra wide 3" Super Duty Band for better grip and reduced canister damage For use with larger hard to remove oil filters For use with a 1/2 inch s...

***Box Included*** Fully adjustable pulling arms and stud adapters are quick and easy to install Includes most common 5/8” – 18 Axle Stud Adapter ...

J-41683-A H-Ring Installation Tool Alt ST-271 Applications: Mack Truck E-TECH and ASET engines Any valve train failure that results in excessi...

Applications: MACK E-6 and E-7 / E-7 ETECH Works on the following seals:25500973, 20705740, 20705209, 20705626, 20706534, 25624093, 41035000811...

J-37720-C Mack E9, E7, & E6 Roller Lifter & Tappet Holder Kit Alternative This tool retains the roller lifters when removing and installing...

Eliminates airlocks and refills entire cooling system in seconds including heater core without the time consuming process of bleeding and purging...

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

Pressure rating 10000 psi Oil capacity 98 cubic inch 3/8-18 NPT oil port Unit requires 9 cfm of air at 100 PSI (at the pump) 2510A Alternative  *...

This tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...

Works on OEM electrical connectors used on trucks and equipment such as Caterpillar, Kenworth, Peterbilt, Freightliner, Mack and more Also used on...

Applications: This is the cam bearing service adaptor set for Mack E7 ETECH, this will not work on the Mack E6 or E7 DRIVE BARS MUST BE PURCHASED ...

***Metal Box Included*** Thread Adaptor M18xP1.5xL Thread Adaptor M20xP1.5xL Thread Adaptor M22xP1.5xL Thread Adaptor M24xP1.5xL Thread Adap...

Fits most class 8 over the road trucks and trailers and some medium duty trucks Use the tapered driver side for bearing races and the flat side fo...

Install bolt-retained bearing caps Accurately aligns bolt-retained bearing caps for easy installation Reduces the risk of damage to needle bearing...

Kit Includes  FEPRO0386 - PITMAN ARM SPREADER ALTERNATIVE TO TIGER 10386 FEPRO0388 - INTERMEDIATE PITMAN ARM PULLER ALTERNATIVE TO TIGER 10388 FEPR...

Used to install front crankshaft seal  Applications: MACK E-7 Alternative to J-37715-A 1-C

Remove and install threaded leaf spring and shackle pins on Western Star, International, Peterbilt and Kenworth suspensions Manufactured from high...

Used to Assemble/Disassemble the Gearbox Application: Volvo  External Diameter 32MM Length: 64MM  Alternative to OEM 9996917 1-C

85137065 Stainless Steel Injector Cup Alt This is the new sleeve design to be used with installer tool 88800513. Applications: MACK  L6, 661 C.I.,...

The SPL Bearing Cap Installer was designed to be as simple as possible. Pre-determined “installed heights” specified by the manufacturer have been...

Remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions Manufactured from high-grade steel t...

This tool is used to install king pin bush. Applications: K160A  Alternative to ST70-31 7-A

14pc Jake Brake Tool Set for Engine Intake and Exhaust Valve.  Alternatives to 88880052, 85111377 and 88880053  Used on intake and exhaust valve a...

Used on intake and exhaust valve adjustment with or without engine brakes and engine brake rocker adjustment shim Alternative to OEM 88800232 Appl...

J-37077 Timing Indicator Light Tool The J-37077 works on Volvo, Mack applications.

No.1 used to remove bearing of 12 speed transmission No.2 used to remove gear of 12 speed transmission Clamp is required while removing Applicatio...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems...

Remove and install threaded leaf spring and shackle pins on International, Peterbilt and Kenworth suspensions Manufactured from high grade steel t...

PT-2210-3A Cutter Plate Assembly for Mack Alternative  10-B

Found on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines Fits Davco Fuel filters 382 and 384 Dura...

For use with 1/2" ratchet or breaker bar Works on 1990-93 Dodge trucks with Dana 60 manual hubs Also available as part of 4542 7-Piece Wheel Beari...

Fits the Most Popular Size Seals for Class 7 and Class 8 Trucks The driver is designed to hold the seals to make installation easier Includes five...