GENERAL TOOLS

205-130 Gauge Tube T79P-4020-A19 Alt Stallion ST-188 3.0630" O.D. Applications: 8.8 Inch, 8.8 Inch Limited Slip Rear Drive Axle/Differential — F...

Gauge Disc 205-129 T79P-4020-A18 Alt Stallion ST-187 Rear Drive Axle/Differential — Ford 8.8-Inch Ring Gear : Ranger : 2010 Rear Drive Axle/Differ...

205-110 Gauge Block T76P-4020-A10 MB990905-4-01 Alt Stallion ST-185 1.7" Applications: Ford, Mitsubishi, Chrysler Rear Drive Axle/Differential —...

G-Style plugs are case hardened steel, plated to resist rust Maximum inlet pressure: 300 PSI Maximum temperature: 250 degrees F Air flow: 99 SCFM

 G-Style plugs are case hardened steel, plated to resist rust Maximum inlet pressure: 300 PSI Maximum temperature: 250 degrees F Air flow: 99 SCFM

Bi-Directional Design for Removing or Tightening Damaged Fasteners Tapered Entry Enables Socket to Easily Seat on a Damaged Fastener Dual Sized So...

Required to test cooling systems on late model GM in.N in. body cars, Saturn and full size Ford cars, as well as some IHC and Kenworth medium and ...

4-13/16" 8 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of hig...

2-7/8" 6 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of high-...

Made of high quality steel (chrome-molybdenum) Engineered specifically for use with impact tools, using the most up to date industrial specificat...

Made of high quality steel (chrome-molybdenum) Engineered specifically for use with impact tools, using the most up to date industrial specificati...

Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability Radius corner design - to extend the life of fa...

Fits filters ranging from 4-21/32" to 5-5/32" (118mm to 131mm) in diameter Features a 1-1/2" wide steel band that can stand up to the high torque ...

Swivel-Gripper No-Slip Filter Wrench for Caterpillar Tough, stainless steel band with permanently bonded textured coating for superior gripping po...

Swivel-Gripper No-Slip Filter Wrench For Cummins & Detroit Diesel Range: 4-5/16" - 4-3/4" (109.5mm 120.7mm) Tough, stainless steel band with p...

Ultra-strong adhesive and reinforcing powders Repairs almost anything! Rock solid in 10 seconds! Q-Bond repairs are able to be grinded, filed, san...

Use to check the size of drill bits, sockets and other items that are either metric or fractional 0-6"/0-150mm range .0005"/64ths/.01mm graduation...

Low cost digital caliper Carbon fiber for extra rigidity Inch, Metric and Fractional reading with the push of a button Easy to read digital displa...

This tool enables you to quickly check the brake adjustment on class 7 and 8 trucks and trailers having S-cam brakes Features a sturdy four positi...

This puller will yank even the most corroded slack adjuster off the S-cam and do so in just a fraction of the time needed with 'heat and beat in. ...

Used to service wheel hubs and bearings New puller design increases applied force and rated for use with an impact gun Can be used on either the f...

Two tools in one 42 mm 6 side fits 2011 to current years 40 mm 12 side fits 2001 to 2010 Used every time a fuel filter is replaced Made in U.S.A.

Tools used to separate connectors on the P/S system and EGR coolers without damage Also works on connectors on other liquid and air lines Each too...

Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of high-strength steel; openings resis...

4" 6 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of high-stre...

GM Torsion Bar Unloader Drop forged frame This tool is required to safely release the tension on the front suspension torsion bar to service the f...

This puller is designed for the toughest Pitman arm jobs Adjustable and have rugged forged jaws shaped to fit the job Two clamp bolts lock the jaw...

For testing at fuel injector port. Applications include: 5.9L 24 Valve electronic injection and 5.9L ISB, ISBE, ISC & QSB diesel engines.

Extra Low-profile (21.15mm height) required for minimal clearance Chrome-vanadium steel for extra strength 3/8 square drive Services Fleetguard an...

Extra Low-profile (21.15mm height) required for minimal clearance Chrome-vanadium steel for extra strength 3/8 square drive Services 6.7L Dodge Cu...

Used for the internal adjustment of Spicer angle-spring and multiple-lever clutches Until now, a pry bar or other makeshift method was used and of...

Extra thin wall deep length impact socket for removing/installing transmission and differential and yoke locknuts* on a wide variety of trucks Bec...

Quickly diagnose internal engine problems such as bad rings, valves and leaking head gaskets. Kit come complete with adapters for most application...

RR1064TR Eaton Clutch Alignment Tool Application: Eaton Endurant HD Series Automated Transmission

Fits 1-1/16" switches up to 2-5/8" long, found on newer GM and Chrysler vehicles Fits 1-1/16" oil pressure sending unit (gauge type), found on mos...

J-47411 Compression Test HDE Adapter This tool is used with the previously release compression test gage to compression test or leak test on the DD...

Designed for flexibility, the USB-Link 3 Wired Edition connects to your PC, tablet, or smartphone with a USB cable, allowing techs to directly conn...

Patented Torsion bar design ensures the most accurate wrench possible Dial Type wrenches are not hand hold sensitive meaning that hand position do...

Precision ground to + .001" Tough epoxy coating Convenient hang-up hole 35" long

Tough polyethylene won't damage automotive finishes Impervious to oil, gasoline and antifreeze Will withstand normal temperature extremes 3 gallon...

J-33880 Detroit 50 and 60 Series Brass Injector Sleeve Remover & Installer Tool Set For use on brass injector sleeve cups 240-1028, 240-1017, 8...

Made of high quality alloy steel (chrome-molybdenum) Engineered specifically for use with impact tools using the most up to date industrial specif...

3V Camshaft Swap Tool Set - Compressor and Wedge - ST-100 & ST-101 - 303-1039 and 303-1175 Alternative This package includes both tools you'll ...

Made to detect defective power steering pumps and gears, plus kinked or clogged lines Dual 2-1/2 in. easy-to-read gauge records pressure from 0-20...

Pulls harmonic balancers, timing gears, & parts having two or three tapped holes Slotted holes in puller body permit cap screws to be position...

OTC's 5-ton capacity, long 2/3-jaw, reversible gear and bearing puller is easily configurable as either a 2 or 3 jaw puller enabling you to remove...

Configuration conversions take just seconds; no wrenches required 2 or 3 Jaw application, with a 7" maximum reach, 3" to 7" spread Both external a...