GENERAL TOOLS

Extra thin wall deep length impact socket for removing/installing transmission and differential and yoke locknuts* on a wide variety of trucks Mad...

Low profile, double-ended tools disconnect fuel lines on many Chrysler, Ford, and GM vehicles Useful for removing the fuel supply line from the se...

Socket is 2” Long The drive size is 3/4" Fits 2-9/64” ball joints Similar to Miller Tools No. C-3561 OTC8034

Services 3/4 and 1 ton American made trucks with 4,6, and 8 bolt patterns.  Mega Hammer 4-6-8 Bolt Pattern

Special low-profile design works in close quarters Designed to access the center port on GM fuel tank sending unit For 3/8" and 1/2" applications;...

Designed to service Ford 4.6L 3V V8 engines used in 05-10 Mustang, 06-10 Explorer, 09 F-Series trucks Designed to service Ford 5.4L 3V V8 engines ...

Patented Design allows tool to be mounted to suspension instead of needing to be held by technician during bushing service Specially designed push...

Precise OEM design Metal construction for durability Used to disconnect high-pressure oil rail supply line Used on the Ford 6.0L diesel engine Mus...

Especially designed to accommodate the 1-11/16 in. (43mm) wheel bearing retaining nut which is recessed into the hub Since the retaining nut is re...

Built especially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks and tractors Also very prac...

For use with 1/2" ratchet or breaker bar Works on 1990-93 Dodge trucks with Dana 60 manual hubs Also available as part of 4542 7-Piece Wheel Beari...

Separating Pitman arms on cars and light trucks is quick and easy with this wedge and an appropriate sized hammer 11" long and has a 1-1/8" for sp...

Disconnects the hydraulic clutch line from the clutch slave cylinder on the following vehicles with manual transmissions and hydraulic clutches: 1...

Adjustable with special replaceable forged jaws Two clamp bolts lock jaws on Pitman arm Can perform other pulling jobs Services cars and light tru...

54 mm hex socket 1/2" square drive end Permits use of a torque wrench 1982-newer Toyota trucks, models FJ, LN, RN

Services 1995-1996 Ford F-series 1/2 ton trucks and full size Bronco with automatic hubs 1/2" square drive

Removes wiper arms on many foreign and domestic cars and light trucks Will not damage wiper arm or hood cowling during removal Simply place puller...

Removes clogged or stuck diesel injector seals 1 Kg (2.2 lbs) slide hammer removes the most difficult seals Slide hammer designed with integrated ...

Designed to install frost plugs in liquid-cooled gas and diesel engines found in automobiles, trucks, SUV, agricultural equipment, and constructio...

Enables you to remove and install bushings ranging from 10mm to 42mm in diameter and 3/8" to 1-3/8" diameter Used in import and domestic cars, tru...

Use to loosen or tighten injection pump retaining bolts whenever pump timing adjustment or pump service is required Services 1996–1999 GM full-siz...

Made from high-quality materials to ensure long-lasting performance and durability Designed for use with F-Series Super Duty trucks and 6.0L Power...

Feature a 1/2" square drive 2 9/16" rounded hex locknut socket Can be used with an extension and torque wrench for accurate tightening Works on 19...

Can be used with an extension and torque wrench for accurate tightening Works on 3/4- and 1 ton Ford F-250 and F-350 trucks with automatic locking...

Kit contains a fuel injector connector tube remover and fuel injector puller The fuel injector connector tube must be removed before removal of th...

Designed to withstand the force of a 3/4" drive impact wrench This rugged socket makes truck tie-rod end removal quick and simple Works on inner a...

Spread between jaw tips: 1-5/16 in. Adjustable with special replaceable forged jaws Two clamp bolts lock jaws on Pitman arm

It can be used with several different attachments depending on the job Has 9-1/2" legs Maximum reach 11-1/2" with a spread of 3-1/8"-11-3/4" Screw...

Designed to remove oil and grease seals when servicing cars, SUVs and light trucks without damaging the housing or bearing Hook tips in two sizes ...

Designed to remove and install frost plugs used in liquid-cooled gas and disel engines found in automobiles, trucks, SUVs, agricultural equipment ...

Labor intensive removal of steering sector is not necessary Compact design of puller allows easy access to the Pitman arm Live center on forcing s...

Heavy duty puller works on most cars and trucks Designed to work on even the most stubborn Pitman arm pulling jobs Position puller jaws over Pitma...

204-592 Lower Arm Ball Joint Separator Tool Alternative Applications: Ford E-150 and E-250 model years 2008, 2009, 2010, 2011, 2012, 2013, 2014,...

Services 1995-1998 Ford F-series 3/4 and 1 ton trucks with automatic hubs 1/2" square drive Wt., 2 lbs., 2 oz.

The set contains 11 drivers for use on both cars and trucks up to 1 ton Includes two handles, one for hammering and one for use with an air hammer...

This is a handy, adjustable tool for removing or installing the snap ring on a transmission rear clutch piston It applies pressure to the clutch d...

Removes and installs injectors without damaging the injector or cylinder head Kit is manufactured to accept a standard 3/8" drive Application: 199...

2-3/4" 6 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of high-...

Removes stubborn hubs when nothing else will Two methods of removal which includes removal of the hub with the aid of the power steering, and remo...

Quickly diagnose, repair and restore truck and trailer harness connections Includes 6 Pin Tester, Pin Cleaner/Resizer and chemical contact enhance...

2-3/8" 8 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of high-...

Extra thin wall deep length impact socket for removing/installing transmission and differential and yoke locknuts* on a wide variety of trucks Bec...

2-9/16 in. 6 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets Sockets are made of h...

Remove 6.4L Power Stroke Actuator Link Rod from turbo arm without removing turbo Reduce service time by separating the link and arm on the truck C...

28mm for 2010-2018, 6.7L Dodge Cummins Fuel Filter Canister

Here's the solution for removing the coupling from the Cummins Compact and Bendix air compressors found on many Cummins 855 cubic inch engines The...

Fits Davco Diesel filter models, 232-233-234 Durable, stainless steel construction Precise, laser-cut angles Opens vent cap also Soft, ergonomic ...

Disassembly socket for poppet valves with 2-prong spanner style end.  Applications include Detroit Diesel engines.  Similar to J-36452-B.