GENERAL TOOLS

310-199  Injector Teflon Seal Calibration Tool Alt ST-243 After fitting injector Teflon seal it must be sized to ensure correct fitment. Applicatio...

205-336 T93P-4020-A Drive Pinion Depth Gauge Tube Alternative Application: F-Series Front Axle Rear Drive Axle/Differential : LS : 2005 Front Driv...

Measures bonded brake lining from 0 to 1/2" in 1/64" graduations Place gauge over brake shoe to take reading For use with larger hard to remove...

Removes truck oil filters from 4-1/2" - 5-1/4" (115 to 135mm) in diameter Caution: Wear eye protection Do not use with power tools Extra band for ...

1/4" male national pipe thread Maximum inlet pressure of 300 pounds per square inch Maximum air flow of 40 standard cubic feet per minute Maximum ...

KWIK-CHANGE®: Interchangeable/compatible with most manufacturers. Compliant with military specification MIL-C-4109. DISTINGUISH: Between air lines...

Non scratching, heavy duty, composite material body Push button quick coupling safely vents the air line Safety style disconnect eliminates flying...

Operating pressure: 0 to 174 psi Flow rate at 6 bar: 28 cfm (Δp = 8.70 psi) Temperature: +5°F to +158°F Non scratching, heavy duty composite mater...

Most Power Dense - Best Combination of Power and Size. POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque & 1,500 ft-...

Most Power Dense - Best Combination of Power and Size. POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque & 1,500 ft-...

Produces vacuum or pressure at the turn of a switch Comfortable ergonomic design One-finger trigger vacuum / pressure release Has durable, accurat...

9011A Fuel Pressure Test Adapter 9011 EN-47589-1 Alternative This adapter is used during the diagnostic procedures on the GM/Chevy 6.6L (LB7 and LL...

9U-5671 Receiver Sleeve Adapter Alternative Applications: 3114 and 3116 Engines 9U-5671 is designed to clear the valve springs and provide adequate...

125-7059 Reaction Sleeve Alternative  Applications: HUEI 3114, 3116 and 3126 Engines

4C-8713 Reamer Shank Applications: 3114, 3116, 3126, 3126 MUI, and 3126 HEUI Engines.

9U-6101 Reamer Group Alternative  Applications: 3114, 3116 and 3126 Engines

4C-8714 4C-8715 Guide Bushing Tool Alternative Applications: 3114, 3116, 3116, 3126 MUI, 3126 HEUI Engines

169-3374 3176 and 3176B Injector Sleeve Removal Kit Used to quickly and easily remove brass injector sleeves with no brass chips to fall into the e...

462-9174 12-892-04 Low Temperature EGR Core Puller Remover Tool This tool works on CAT Caterpillar CT11 & CT13.

456-7526 Timing Pin Tool Includes the 208-9388

7X-1171 Adapter Tool

OTC 7117 6V-4061 Caterpillar Fuel Injector Nozzle Puller Tool Designed to remove pencil nozzles on Cat engines. The tool applies straight, even pul...

Valve Spring Compressor J-35580-B Includes -3 adapter Application: Detroit Diesel Series 60

J-41479-10 Crankshaft Rear Seal Installer Adapter Alt ST-197-10 The rear crankshaft seal on Gen V V6/V8 engines is installed in reverse to Gen IV e...

303-1531 5.2L, 5.0L, 3.3L, 3.0L, 2.7L Crankshaft Front Seal & Harmonic Balancer / Vibration Damper Installer Tool Alt ST-304 This tool includes...

EN-48932 09244-G2100 6725 Heavy Duty Belt Tension Compressor Tool Alt ST-329 Compresses belt tensioner spring when replacing the engine drive belt...

2025001090 3.6L 2016+ Left Timing Chain Tensioner Holding Tool Alt ST-313 Applications: Applications of 3.6L Pentastar 2016 - Current

8 Point sockets are commonly used for railroad applications Packaged in a heavy duty blow mold case Includes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/...

The perfect driver for your bore brushes Quick locking disconnect 1/4" female hex drive Non-slip grip handle Compact design

Gbd 6" (152Mm) 180Sc Flex-Hone GBD 6" (152MM) 180SC FLEX-HONE

Lifting Range: 15.75" to 24" Designed to be used in pairs Steel base with four feet pads for stability Ratchet action design with ductile iron sup...

Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability Radius corner design - to extend the life of fa...

Set contains 5 different sized pry bars to cover any prying application Custom grip handle with strike-able end cap Heat treated and tempered for ...

Cummins Air compressor & Accessory Drive Splined Gear Coupler Puller Jaws of tool are considered consumable (no warranty) G1A

10277 Camshaft Timing Locking Tool Alt ST-244 2012 (500) - Systems (9 - Engine, 1.4L I4 16V Turbo, 9 - Engine, 1.4L I4 8V E100, 9 - Engine,1.4L ...

10276A 10276 1.4L Crankshaft Timing Locking Tool Alt ST-265 2012 (500) - Systems (9 - Engine, 1.4L I4 16V Turbo, 9 - Engine, 1.4L I4 8V E100, 9 ...

09268-03020-01 Fuel Injector Seal Sizer Tool Alt ST-237 Applications: Lexus

09261-03020-01 Fuel Injector Seal Sizer Tool Alt ST-239 Applications: Lexus

ZTSE6044 373-4796 High Pressure Pump Drive Holding Plate Tool Alt ST-300 Applications: International and CAT CT660 Truck, CT11, CT13 This is the ho...

Stallion ST-135 Exhaust Camshaft Locking Pin - VM.1053 Alt Use this special tool to lock the Exhaust Camshaft during Timing Procedures on the 2.8...

Stallion ST-134 Intake Camshaft Locking Pin - VM.1052 Alt Use this special tool to lock the Intake Camshaft during Timing Procedures on the 2.8 L...

Stallion ST-172 Traction Lock 9.75 Differential Gauge 205-389 T97T-4946-A Alt To use this mandrel you must purchase 205-135 or ST-171. Rear Drive ...

Stallion ST-113 Universal Cigarette Lighter Power Point Socket Remover (All Makes) Use this special tool to remove Power Outlet & Cigar Lighter...

J-43265 5-8840-2623-0 7.8L Isuzu Duramax Injector Nozzle-Cup-Sleeve-Tube Remover Alt Stallion ST-216 for 7800 7.8L, 2005-2010 Isuzu NPR 4HK1. U...

Intake & Exhaust Camshaft Locking Pin Set - VM.1052 VM.1053 Alternative Includes ST-134 & ST-135 Use this special tool set to lock the ...

EN-51267 Oil Pump Housing Aligner Tool Alt The oil pump housing must be centered to the crankshaft on Gen V V6 and V8 engines to ensure proper oil ...

Crankshaft Front Oil Seal Installer 303-635 Used with 303-335 and 303-102 Double Lip Front Seal Only Application: E-Series and F-Series Dana 80 Rea...

Camshaft Holder Set EN-46105 Alt Applications: V6 HIGH FEATURE ENGINE EN-46105 is a set of metal plates that are positioned over the ends of th...