DETROIT DIESEL

J-45876 Cylinder Pack Liner Puller Remover Tool 5875 Applications: Detroit Diesel 60 Series 12.7L and 14.0L with EGR. MTUS2000 DD13 DD15 DD16 Not...

Detroit Diesel DD13 DD15 DD16 19MM High Pressure Fuel Line Socket and Engine Brake Adjustment Tool Jake Brake Feeler Gauge 4.6MM and 4.1MM J-48770 ...

Provides fast and effective removal and installation of even the most seized wheel studs. Remove and install 10 studs in only 10-15 minutes. Elim...

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

DT466 Rear Crankshaft Oil Seal & Wear Sleeve Installer Master Set ZTSE2535C, ZTSE4749, & ZTSE4637 Alt Kit Includes/Applications: FEPRO4749...

09300 Chadwick & Trefethen Carbon Straight LP Reamer Size 30 Adjustment Range : 1 1/4" - 1 7/16" 1.250 - 1.437 ** Replacement Carbon Steel ...

TU-15-25 DD40E, 7.3L, T444E, DT466E DT530/HT530 Compression Test Adapter ToolApplications: 1994 - 2003 Detroit Diesel Series 40E, 7.3L , T444E, DT4...

Check fuel system pressure on diesel engines with a Compuchek test port Check fuel system restriction on diesel engines with Compuchek test ports ...

Inserts into the crankshaft position sensor hole and the tip protrudes into a hole in the flywheel to accurately locate Top Dead Center (TDC) for c...

Used to remove and install the TRB9347 bushing.Bushing cross reference part numbers also include TRK1306, TRB9347-T, 334-2219, 3889-50544015, 5866-...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems...

Description: Used to check fuel system restriction on diesel engines with Compuchek test ports Application :  Fits Compuchek test ports o...

TU-15-82 DD60 N3 Injector Compression Test Adapter ToolFits Detroit Diesel 60 Series 2003, 2004,2005,2006,2007 N3 Injectors # 0414703002.This will ...

23501580 8929078 Alternative DD50 DD60 Injector Tube Set of 6 Cups Used with J-33880. Applications: Direct Diesel 50 and 60, DD50, DD60 OEM Cup Alt...

***Box Included*** Fully adjustable pulling arms and stud adapters are quick and easy to install Includes following Adapter set: 5/8” – 18 Axle St...

Instantly shears off the cotter pin as the clevis pin is easily removed. The spring-loaded plunger positions itself automatically over the brake cl...

High Quality Alternative 23534745 DD60 Injector Tube Applications: L6, 858 C.I., (14.0L), DD60, Detroit Diesel 60 Series Used with FEPRO0424 G1B

J-47407-128UPD DD13 Cylinder Liner Installer Adapter Alternative Also referred to as J-47407-128 in some manuals. Used with J-47407 or FEPRO7407 ...

The SPL Bearing Cap Installer was designed to be as simple as possible. Pre-determined “installed heights” specified by the manufacturer have been...

J-35906-6A Late Model DD60 Cam Gear Pilot Adapter  Applications: Late Model 60 Series Detroit Diesel (Fine Thread)Replacement Bolt for FEPRO5906

W936589006300 Alternative Detroit DD5 Oil Priming Adapter Adapter for priming the lubrication system. Used in combination with Pre-Oiler Kit J-4529...

Safely and efficiently removes virtually all Haldex self-adjusting slack adjusters including left offset, right offset and standard elongated arm d...

Instantly shears off the cotter pin allowing the 3/16″ clevis pin to be easily removed. The spring-loaded plunger positions itself automatically ov...

Alternative to TG16002 Alternative Brake Anchor Pin Press Tool  Safely and easily remove brake anchor pins and bushings on virtually all 16-1/2” S...

34900 Diesel Compression Tester Tool Set Alt #2 BACHARACH Allow a Bacharach Brand adapter to be used without tester. No. 260-01 #3 1P-5564 For test...

W936589000700 Alternative Detroit DD5 Fuel Injector Cup Removal/ Installation Tool Removes and installs the injector cup into the cylinder head. A ...

KL50003 Detroit Diesel 60 Series Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Counter Bore Re-Conditionin...

Fits the Most Popular Size Seals for Class 7 and Class 8 Trucks The driver is designed to hold the seals to make installation easier Includes five...

Simplifies and expedites the removal of heavy-duty yokes on drive shafts, transmissions and rear-end differentials without damage to yokes or other...

J-33880 J-33880-4 Alternative Detroit Diesel 60 Series Injector Nozzle/Cup/Sleeve/Tube Remover and Installer w/Imported Tap The head must be remove...

W936589001500 Alternative Detroit DD5 Top-Dead-Center (TDC) Locating Tool Inserts into the crankshaft position sensor hole and the tip protrudes in...

J-47110 Alternative Fire Ring Adapter Tool  Used with FEPRO5983 This tool is used with the piston ring compressor to adapt it to the pistons that u...

This tool has been designed and tested to suit Hendrickson manufactured torque rods fitted with 50 mm bushes. Using this tool on other manufacturer...

23538840 Alternative DD60 Injector Tube (Set of 6) Applications: L6, 858 C.I., (14.0L), Detroit Diesel 60 Series Used with FEPRO6904 or FEPRO0424 G1B

Used to adjust the air brake Application: MERITOR PAN17 PAN19 PAN22 MAXX22T MAXXUS Alternative to 6401955222 640-195-522-2 DAF0907695 FREIGHTLINER...

Found on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines Fits Davco Fuel filters 382 and 384 Dura...

This tool is used to remove the crankshaft sleeve and wear sleeve from the engine. Application:  DD60, Detroit Diesel 60 Series Insert notching too...

J-45983 Alternative Detroit Diesel Mercedes-Benz MBE4000 Piston Ring Compressor Must be used with FEPRO7110 to install the piston assembly into the...

Provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. Includes alternative t...

Detroit Diesel DD13 DD15 DD16 W470589004300 Rear Crankshaft Oil Seal Remover and Installer Tool Alternative   DSN470E19001 Alternative Detroit DD15...

Used to pressurize vehicle systems for leak detection. Pressure loss, indicated by sound or gauge movement, helps identify system leaks and verify ...

J-34046-B TU-15-36 Alternative Diesel Compression Test Adapter Tool  Used with J-6692-B Compression Test Gauge  Injector adapter with quick disconn...

MAN Diesel Flywheel Rotating Tool with reversable drive unit. This tool has interchangable drive sides to allow for flywheel or other obstructions....

Both, safely and efficiently removes virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters. It is simple to slip on for instant r...

Two 5/8" - 11 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

Used for the internal adjustment of Spicer angle-spring and multiple-lever clutches Until now, a pry bar or other makeshift method was used and of...

W936589002300 Alternative Detroit DD5 Camshaft Timing Tool Verify camshaft timing during repair or for diagnostic purposes 14-B

W936589021500 Alternative Detroit DD5 Flywheel Guide Pins Aids in removal and installation of the flywheel. G2B