DETROIT DIESEL

Detroit Diesel J-48824 60 Series Injector Nozzle Cup Sleeve Tube Remover Installer Alternative Tool for screw-in stainless cups 240-1045 23534745 2...

Kit Includes  FEPRO0386 - PITMAN ARM SPREADER ALTERNATIVE TO TG 10386 FEPRO0388 - INTERMEDIATE PITMAN ARM PULLER ALTERNATIVE TO TG 10388 FEPRO0389 ...

Detroit Diesel DD15 DD16 Camshaft Timing Tool Kit Alternative to W470589104000 W470589001500 Engine Service Kit Includes TDC Locating Pin also used...

J-35791 Cylinder Liner Puller Remover Tool  Works on the Non-EGR Detroit Diesel 50 & 60 Series  Also Works on DD13 DD15 DD16 (Plate Included) ...

This tool can be used with FEPRO1401 to compress the rings and allow the piston to be inserted into the cylinder bore without damage to the ring s...

J-41065 PT-2200-90 DD60 Counter Bore Cutter Adapter Kit Detroit Diesel 60 Series This kit is used with PT-2250-B This kit includes: PT-2200-90 Cut...

Application: MAN/MERCEDES TRUCK Size: (H64.7, 12POINT, 1" ) Nut no. ref: 9463510072 MAN oem no. ref : 80996030176 3-C

09330 Chadwick & Trefethen Carbon Straight LP Reamer Size 33 Adjustment Range : 1 7/8" - 2 3/16" 1.87 - 2.187 ** Replacement Carbon Steel B...

J-35642 Crankshaft Gear Remover & Installer Tool Applications: Detroit Diesel Series 60 This tool is used to remove and install the crankshaft ...

This tool is used to install the rear main oil seal. Applications: MBE 4000, Detroit Diesel  Alternative to J-45393 15-E

Application: Commonly found on class 6-8 transportation trucks and equipment. (Kenworth, Peterbilt, Freightliner, Mack, Volvo, etc.)  Easily remov...

Detroit Diesel DD13 DD15 DD16 19MM High Pressure Fuel Line Socket Engine Brake Adjustment Tools 4.6MM 4.1MM and Flywheel Barring Tool J-46392 W9045...

This tool is used to rotate the crankshaft during engine service on 60 series  Application: DETROIT DIESEL 50/60/92 SERIES Alternative to J-362...

A4720780273 A0249976445 Alternative Detroit DD13 DD15 DD16 Injector Tube (Set of 6) Works in place of injector tube DDCA4720780273 and 6920900 It i...

09260 Chadwick & Trefethen Carbon Straight LP Reamer Size 26 Adjustment Range : 13/16" - 7/8" 0.812" - 0.875" ** Replacement Carbon Steel B...

Replacement Bolt Spreader Assembly for Alternative J-45876 Cylinder Pack Liner Puller Remover Tool  J-45876 also sold: FEPRO5876.  5-E

KL50000 Counter Bore Re-Conditioning Tool The K-Line 50000 is used to resurface the seat to inlay a shim. No special bases required. The procedure...

Detroit Diesel Series 60 Front and Rear Crankshaft Seal and Wear Sleeve Installer Heavy Duty OEM Alternative J-35686-B Two Cycle 92 12.7L 14L Engin...

Detroit Diesel Series 60 Front and Rear Crankshaft Seal and Wear Sleeve Installer Heavy Duty OEM Alternative J-35686-B Two Cycle 92 12.7L 14L Engin...

J-33880 Alternative Detroit Diesel 60 Series Injector Nozzle/Cup/Sleeve/Tube Remover w/Imported Tap The tap is considered a wear item with no warra...

Detroit Diesel DD13 and DD15 Crankshaft TDC Locating Tool Alternative to J-48630 Detroit Diesel DD13 and DD15 Crankshaft TDC Locating Tool J-48630 ...

Detroit Diesel DD15 DD16 Engine Timing Tool Bundle Includes TDC Locating Pin Barring and Camshaft Timing Tools Heavy Duty Solid Steel Alternative t...

J-35642 Crankshaft Gear Remover & Installer Tool Applications: Detroit Diesel Series 60 This tool is used to remove and install the crankshaft ...

Detroit Diesel DD13 DD15 Idler 3 Cantilever Tool J-47487 Alternative Used with the DDC procedure to set the gear timing for cam installation. Used ...

Fits Most Class 8 Over the Road Trucks and Trailers and Some Medium Duty Trucks. Use the tapered driver side for bearing races and the flat side fo...

Tool to remove camshaft bearing caps Use with the FEPRO6375  Application: DD13 DD15 Alternative to J-48883/W470589023300 Using Camshaft cap pul...

***Box Included*** Torque multiplier can turn small amounts of input torque into large output torque to loosen the toughest threaded fasteners whi...

 This high quality base has a very strong magnet (50-lb force) which can mount to flat or round surfaces at any angle firmly and is easily activat...

Remove crankshaft oil seal Applications: Detroit Diesel Series 60, TWO CYCLE 71, and TWO CYCLE 92 Insert notching tool between back-up ring and...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems. 6...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems 8 ...

Used to remove the unit pump. Used with the FEPRO8883 Application: DETROIT DIESEL DD13 DD15 / MBE900 Alternative to J-46375-A Using Camshaft cap p...

Eliminates airlocks and refills entire cooling system in seconds including heater core without the time consuming process of bleeding and purging...

This tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...

Detroit Diesel 60 Series Jake Brake Retaining Ring Installer Tool J-45976 and M30157 Alternative. 14-B

J-45876 Cylinder Pack Liner Puller Remover Tool 5875 Applications: Detroit Diesel 60 Series 12.7L and 14.0L with EGR. MTUS2000 DD13 DD15 DD16 Not...

Works on OEM electrical connectors used on trucks and equipment such as Caterpillar, Kenworth, Peterbilt, Freightliner, Mack and more Also used on...

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

PT-6410-5 PT-6400-C to ZTSE2536 Conversion Kit Alt Converts PT-6400-C to ZTSE2536.  Includes High-Quality Aftermarket Alternatives of: 2x PT-6410-...

Detroit Diesel DD13 DD15 DD16 19MM High Pressure Fuel Line Socket and Engine Brake Adjustment Tool Jake Brake Feeler Gauge 4.6MM and 4.1MM J-48770 ...

Detroit Diesel DD15 DD16 Engine Timing Tool Set TDC Locating Pin Fuel Line Socket Barring and Camshaft Timing Tools Heavy Duty W47058090900 W470589...

09310 Chadwick & Trefethen Carbon Straight LP Reamer Size 31 Adjustment Range : 1 7/16" - 1 5/8" 1.437 - 1.625 ** Replacement Carbon Steel ...

Application: Detroit Diesel 60 series Alternative to J-46305 3-A

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems...

Works on many makes and models including Detroit 60 Series, DD60, DD13, DD15, DD16, Cummins, Caterpillar, International and many more Includes ...

TU-15-25 DD40E, 7.3L, T444E, DT466E DT530/HT530 Compression Test Adapter ToolApplications: 1994 - 2003 Detroit Diesel Series 40E, 7.3L , T444E, DT4...

18 Ton Hydraulic Cylinder Ram *** Pump and Hydraulic Cylinder available with FEPRO3636 *** 

J-47411 Compressor Test HDE Adapter ( 5/16 NPT Fitting ) This tool is used with the previously release compression test gage to compression test or...