CUMMINS

Provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. Application: Commonly...

Provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples Size: M16x1.5 Alternat...

Provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. Application: Common...

Provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. Application: Commonly ...

Provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. Application: Commonly ...

Simplifies and expedites the removal of heavy-duty yokes on drive shafts, transmissions and rear-end differentials without damage to yokes or other...

5394639 Cummins Medium Duty Compression Test Leak Adapter Tool Used to test compression, perform a leak-down test, or pressurize the combustion ch...

PT-2210-1A Plate Alternative and Hardware for PT-2210-AThis tool kit that can be used as a replacement base plate and hardware kit for your FEPRO01...

This is the adaptor for Cummins QSK Series cam bearing. Alternative to M20060-38 Used with FEPRO9029 19-D

Cummins Air compressor & Accessory Drive Splined Gear Coupler Puller Jaws of tool are considered consumable (no warranty) G1A

4312298 Alternative Retaining Ring  Engine Family:ISX15 CM2250ISX15 CM2250 SNISX15 CM2350 X101PowerGen QSX15 CM2250PowerGen QSX15 CM2250 ECFQSX15 C...

Both safely and efficiently removes virtually all Rockwell self-adjusting slack adjusters. It is simple to slip on for instant results, saving each...

3823374 PT-2205-25A Alternative NH/NT 855 Cutter Plate Assembly Tool  Used with PT-2250-B or PT-2050-D Applications: 855 NH N-14 5 1/2 15-D

Install two bearing caps in one procedure on virtually all medium and light-duty u-joints An encased magnet is utilized for installation, retaining...

3417717 High Quality Alternative Stainless Steel Sleeves (Set of 6) 3417717, FP3417717, 419619241 Applications may include: L6, 611 C.I., (10.0L)...

3417717 High Quality Alternative Stainless Steel Sleeve 3417717, FP3417717, 419619241 Applications may include: L6, 611 C.I., (10.0L), L-10, Dies...

To prevent the crankshaft rear oil seal from damaged while installing it. Application: DAF 17 TONS (LF55) DAF 17 TONS (CF65) CUMMINS ISB4.5, ISB6...

This tool removes and installs the rear crankshaft thick wear sleeve and wet flywheel housing oil seal. Application: ISX & QSX Alternative to ...

3162462 Cummins Cylinder Liner Remover Plate Used with 3163745 to remove the liner in the ISX engine series.

3163745 Cylinder Liner Remover Applications: For all models except B series.3162462 will require an additional puller plate and for this informatio...

KL50006 Cummins NT/NH, N14 Counter Bore Cutter Assembly Tool NOTE: This is only the cutter head assembly for the 50000 Counter Bore Re-Conditioning...

6.4L 6.2L 5.7L 2042300090 Front Damper & Crankshaft Seal Installer Tool Set Alt ST-306Use these special tools in conjunction with appropriate s...

5041-44 Dana 44 (FBI 216) Inner Axle Seal Installer Adapter Tool Alt ST-305This is used with 5041A on the inner axle seal on the intermediate axle ...

9011A Fuel Pressure Test Adapter 9011 EN-47589-1 Alternative This adapter is used during the diagnostic procedures on the GM/Chevy 6.6L (LB7 and LL...

For use with 1/2" ratchet or breaker bar Works on 1990-93 Dodge trucks with Dana 60 manual hubs Also available as part of 4542 7-Piece Wheel Beari...

Kit contains a fuel injector connector tube remover and fuel injector puller The fuel injector connector tube must be removed before removal of th...

28mm for 2010-2018, 6.7L Dodge Cummins Fuel Filter Canister

Here's the solution for removing the coupling from the Cummins Compact and Bendix air compressors found on many Cummins 855 cubic inch engines The...

Fits Davco Diesel filter models, 232-233-234 Durable, stainless steel construction Precise, laser-cut angles Opens vent cap also Soft, ergonomic ...