CUMMINS

5296531 PT-2210-5A 3823567 C8.3 C8.9 ISL ISC Cutter Plate Assembly Tool Alt Works with PT-2210-12 cutter bit Used with Counterbore Ledge Cutter Dri...

KL50005 Cummins ISX Counter Bore 150MM Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Counter Bore Re-Conditioning Tool ...

The SPL Bearing Cap Installer was designed to be as simple as possible. Pre-determined “installed heights” specified by the manufacturer have been...

5573247 Alternative Fuel Pump Test Tool  This tool is designed to check the outlet pressure on the fuel pump. Supersedes 3164621 12-A

This tool is used to install the front crankshaft oil seal in the front cover, from the engine side. This tool is designed to install either the st...

Safely and efficiently removes virtually all Haldex self-adjusting slack adjusters including left offset, right offset and standard elongated arm d...

Instantly shears off the cotter pin allowing the 3/16″ clevis pin to be easily removed. The spring-loaded plunger positions itself automatically ov...

Alternative to TG16002 Alternative Brake Anchor Pin Press Tool  Safely and easily remove brake anchor pins and bushings on virtually all 16-1/2” S...

34900 Diesel Compression Tester Tool Set Alt #2 BACHARACH Allow a Bacharach Brand adapter to be used without tester. No. 260-01 #3 1P-5564 For test...

Injector Puller Set for Cummins Drop forged body Two jaw design firmly grips the injector, with sliding hammer The two jaws have heat treatment He...

Used to remove and install the TRB9347 bushing.Bushing cross reference part numbers also include TRK1306, TRB9347-T, 334-2219, 3889-50544015, 5866-...

This is the adaptor for CUMMINS B SERIES bearing Alternative to M20060-33 Used with FEPRO9029 19-D

TU-15-75 ISB Compression Test Adapter Tool Used with J-6692-B Compression Test Gauge

Fits the Most Popular Size Seals for Class 7 and Class 8 Trucks The driver is designed to hold the seals to make installation easier Includes five...

Cummins ISX Cam Timing Wedge 4.50 Degree 3163807 OEM Alternative Tool for Gear Train Timing on all Engines 1999 to 2020. This is a replacement for ...

This is the cam bearing Adaptor & Collet set for Cummins NT Big Cam and Small Cam engines, this also includes the N14 NH. Applications NT NH...

Cummins ISX Cam Timing Wedge 4.25 Degree 2892428 OEM Alternative Tool for Gear Train Timing on all Engines 1999 to 2020. This is a replacement for ...

Simplifies and expedites the removal of heavy-duty yokes on drive shafts, transmissions and rear-end differentials without damage to yokes or other...

ST-1229 Alternative Cummins Cylinder Liner Driver  

This tool has been designed and tested to suit Hendrickson manufactured torque rods fitted with 50 mm bushes. Using this tool on other manufacturer...

3824942 7470 Cummins J, K, N, NH, V12, N14, & L10 Injector Timing Fixture Kit Measures static timing on Cummins J K N NH V-12 N-14 and L-10 ser...

Alternative to ST-880 416-6152-53 Works on Injector Sleeves/Tubes/Cup part numbers 3011934, 3070486, 3406702, FP3070486, 419619251, 71925 and 240-1...

Used to adjust the air brake Application: MERITOR PAN17 PAN19 PAN22 MAXX22T MAXXUS Alternative to 6401955222 640-195-522-2 DAF0907695 FREIGHTLINER...

Found on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines Fits Davco Fuel filters 382 and 384 Dura...

Provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. Includes alternative t...

12MM Turbo Charger Bolt Wrench Tool (12MM Version of 15MM 9866B 9866A 9866) The OEM tool is 15mm but somewhere along the way the turbocharger bolts...

Cummins ISX Timing Wedge 4.75 Degree 2892429 OEM Alternative Tool for Gear Train Timing on all Engines 1999 to 2020 Cummins ISX Timing Wedge 4.75 D...

PT-2210-12M 5296531 Alternative Cummins Carbide Cutter Tool  Superseded from PT-2210-12 Replacement Cutter Bit For Cummins Cutter Plates 5296531 (...

Used to pressurize vehicle systems for leak detection. Pressure loss, indicated by sound or gauge movement, helps identify system leaks and verify ...

Both, safely and efficiently removes virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters. It is simple to slip on for instant r...

·         The kit is used to remove and install the unitized crankshaft rear seal used on X12 CM2350 X119B engines. ·         Engine application: C...

High Quality 3070486 3007759 Alternative Copper Injector Sleeve *** O-Ring Included *** Applications may include: L6, 855 C.I., (14.0L), Cummins N...

Used for the internal adjustment of Spicer angle-spring and multiple-lever clutches Until now, a pry bar or other makeshift method was used and of...

5394350 Cummins X15 Compression and Leakdown Test ToolUsed for testing compression, pressurizing the combustion chamber or performing leak-down tes...

Provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. Application: Commonly ...

M20060-99 Replacement Cam Bearing Puller Rod for M20065 Required for functionality of the following:  FEPRO9029-16 M20060-012 M20060-013 M20060-014

*** Metal Case Included*** 3163785 M50145 Cummins ISX ISX15 QSX15 Counter Bore Assembly Tool Kit Alternative 2892423 Base Plate 5296533 Cutter P...

This is the adaptor for Cummins K Series cam bearing Alternative to M20060-02 Used with FEPRO9029 19-E

3417717 High Quality Alternative Stainless Steel Sleeves (Set of 6) 3417717, FP3417717, 419619241 Applications may include: L6, 611 C.I., (10.0L)...

Slide Hammer 2LB  Multiple uses

Sleeve Seat Cutter Guide Bushing for Cummins ISX15 / QSX15 Alternative to 416-6156-32  **Full Kit FEPRO9071** 

10105 Application: U-joints with bearing cups 1” to 1.25” O.D. 10104 Application U-Joints with bearing cups 1.25″ to 1.7″ O.D. Spicer SPL 90 &am...

Provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples. Application: Common...

Provides quick removal or adjustment of tie rod ends without the risk of flaring or rounding out your socket on virtually all heavy duty trucks. Al...

5394639 Cummins Medium Duty Compression Test Leak Adapter Tool Used to test compression, perform a leak-down test, or pressurize the combustion ch...

*** Metal Case Included*** PT-2210-A 50134 Alternative Caterpillar Cummins Mack Lower Ledge Counterbore Tool Kit  Used to resurfaces the lower ledg...

The Slack Adjuster Puller is easy to use, as it makes it simple to slip on for instant results, saving each mechanic and technician time and labor....

Install two bearing caps in one procedure on virtually all medium and light-duty u-joints An encased magnet is utilized for installation, retaining...