CUMMINS

5394454 Alternative Piston Ring Compressor Tool and Anti-Polishing Ring Adapter Set 137MM Supersedes 3163058, 3163158, 3164846 This tool works on C...

KL50000 Counter Bore Re-Conditioning Tool The K-Line 50000 is used to resurface the seat to inlay a shim. No special bases required. The procedure...

Cummins 855 L10 ISM M11 N14 Copper Injector Sleeve/Cup/Tube Expander ST-880 Alternative Works on Injector Sleeves/Tubes/Cup part numbers 3011934, 3...

12MM & 15MM Turbo Charger Bolt Wrench Tool Pair (Replaces 9866B 9866A 9866) This tool is used on both the older 15mm turbocharger bolts on Cumm...

Set of 6 High Quality 3070486 Alternative Copper Injector Sleeve Applications may include: L6, 855 C.I., (14.0L), Cummins NTA 855 Series BC III, C...

***Box Included*** Torque multiplier can turn small amounts of input torque into large output torque to loosen the toughest threaded fasteners whi...

5299721 Alternative Cummins ISX Fuel Pressure Tool Kit Application: ISX15 CM2350 X101, QSX15 CM2250, QSX15 CM 2250 ECF, QSX15 CM2350 X105, QSX15 C...

 This high quality base has a very strong magnet (50-lb force) which can mount to flat or round surfaces at any angle firmly and is easily activat...

Fits Most Class 8 Over the Road Trucks and Trailers and Some Medium Duty Trucks. Use the tapered driver side for bearing races and the flat side fo...

4918241 Alternative Cummins Diesel M11 ISM L10 Rear Crankshaft Seal Installer  This tool works on the new style seal 3883620 or 4089544. If you ar...

This Cummins barring tool is used to rotate the engine by inserting it into a port located on the bell housing/engine adapter plate. It provides a...

Works on many makes and models including Detroit 60 Series, DD60, DD13, DD15, DD16, Cummins, Caterpillar, International and many more Includes ...

This tool is required to rotate the engine when the air compressor drive is removed. Two cap screws are provided with the adapter to be used when ...

This tool is designed specifically to remove and/or install the cam gear, without heat, and with the cam partially removed from the engine. All ne...

Universally suitable for the coupling nut of the high-pressure fuel line of passenger cars and trucks.  Specially cut-socket (19 mm) for quick and...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems. 6...

Cam Bearing Adaptor Set - Cummins C Series DRIVE BARS MUST BE PURCHASED SEPARATELY (FEPRO9029) 19-D

09310 Chadwick & Trefethen Carbon Straight LP Reamer Size 31 Adjustment Range : 1 7/16" - 1 5/8" 1.437 - 1.625 ** Replacement Carbon Steel ...

TU-15-78 Diesel Compression Test Adapter Tool Cummins ISX SOHC Compression Test Adapter Super Duty Diesel Compression Test Gauge Applications: Cum...

Eliminates airlocks and refills entire cooling system in seconds including heater core without the time consuming process of bleeding and purging...

This tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...

Works on OEM electrical connectors used on trucks and equipment such as Caterpillar, Kenworth, Peterbilt, Freightliner, Mack and more Also used on...

PT-6410-5 PT-6400-C to ZTSE2536 Conversion Kit Alt Converts PT-6400-C to ZTSE2536.  Includes High-Quality Aftermarket Alternatives of: 2x PT-6410-...

3824451 Alternative Cummins N14 Accessory Drive Seal Installation Tool Applications: Cummins N14 This driver is designed to install the accessory...

Cummins Injector Brush

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

PT-2200-72A 3823373 903 NH 5-1/2 Cummins Cutter Plate Assembly Tool Alternative  Works with MI-PT-2200-6 cutter bit 19-D

Extended Tap for Cummins ISX15 / QSX15 Alternative to 416-6156-60  **Full Kit is FEPRO9071** *** The tap is considered a wear item with no warranty...

3686961 Injector Tube High Quality  Supersedes 3685966 Includes:  3686961 Injector Tube Alt  4386754 Cummins Rectangular Ring Seal   3686883 Retai...

***NO NEED TO REMOVE HEAD FROM TRUCK*** Tap Magic Cutting Fluid Included Step by Step Instructions Included Designed to (REMOVER ONLY) SOHC CU...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems...

This is the complete cam bearing Adaptor & Collet set for Cummins NT Big Cam and Small Cam engines, this also includes the N14. Application...

Cummins 855 L10 ISM M11 N14 Copper Injector Sleeve/Cup/Tube Installer Alternative Works on Injector Sleeves/Tubes/Cup part numbers 3011934, 3070486...

3823569 Cummins L10/M11 ISM Counterbore Shim Cutter Plate Alternative  Works with PT-2210-12M cutter bit 10-B

KL50005 Cummins ISX Counter Bore 150MM Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Counter Bore Re-Conditioning Tool ...

PT-7020 3822736 5120-01-262-7316 Alternative Cummins 5.5" Piston Ring Compressor Tool  This will work on all 5.5" bore such as N14 and 855 Cummins

2065100090 ISB 6.7L Cummins Hydraulic Lifter Installer Tool Alternative This is a High-Quality Aftermarket Product Use this special tool with appro...

Instantly shears off the cotter pin as the clevis pin is easily removed. The spring-loaded plunger positions itself automatically over the brake cl...

This is a ISX setting master that is used to zero liner height / depth gage for ISX counter bore cutting.  This part has been ground to establish ...

Provides fast and effective removal and installation of even the most seized wheel studs. Remove and install 10 studs in only 10-15 minutes. Elim...

3377079 Alternative Cummins 855 L10 ISM M11 N14 Copper Injector Sleeve/Cup/Tube Puller Works on Injector Sleeves/Tubes/Cup part numbers 3011934, 30...

34900 Diesel Compression Tester Tool Set Alt #2 BACHARACH Allow a Bacharach Brand adapter to be used without tester. No. 260-01 #3 1P-5564 For test...

09300 Chadwick & Trefethen Carbon Straight LP Reamer Size 30 Adjustment Range : 1 1/4" - 1 7/16" 1.250 - 1.437 ** Replacement Carbon Steel ...

5296531 PT-2210-5A 3823567 C8.3 C8.9 ISL ISC Cutter Plate Assembly Tool Alt Works with PT-2210-12 cutter bit Used with Counterbore Ledge Cutter Dri...

Injector Puller Set for Cummins Drop forged body Two jaw design firmly grips the injector, with sliding hammer The two jaws have heat treatment He...

5394454 Alternative Piston Ring Compressor Tool 137MM Supersedes 3163058, 3163158, 3164846 This tool works on Cummins ISX, X15, K Series, Cat 3400,...

Safely and efficiently removes virtually all Haldex self-adjusting slack adjusters including left offset, right offset and standard elongated arm d...

TU-15-75 ISB Compression Test Adapter Tool Used with J-6692-B Compression Test Gauge