Products

Includes ZTSE2587A 17-25-13 Remover and ZTSE2534A 04-148-3 Installer ZTSE43981 Slide Hammer and MT7934819 Tap  Tap is considered Wear Item (No Wa...

Here's the solution for removing the coupling from the Cummins Compact and Bendix air compressors found on many Cummins 855 cubic inch engines The...

Conical design for strength and secure fit 3/4-16 X 4-3/4" forcing screw for power Designed to fit Pitman arms on domestic cars and light trucks L...

7500 psi maximum operating pressure Precision-machined, all steel handle, body and guard bracket provides durability and longevity Unique, precisi...

RR1012TR-2 Countershaft Front Bearings Driver Included in the RR1012TR Countershaft Bearing Driver Kit Used to install front countershaft bearings ...

Used to install rear countershaft bearings, RT-series transmissions. Alternative to RR1012TR-4 18-B

Operating pressure: 0 to 174 psi Flow rate at 6 bar: 28 cfm (Δp = 8.70 psi) Temperature: +5°F to +158°F Non scratching, heavy duty composite mater...

Non scratching, heavy duty, composite material body Push button quick coupling safely vents the air line Safety style disconnect eliminates flying...

Crankshaft Front Oil Seal Installer 303-635 Used with 303-335 and 303-102 Double Lip Front Seal Only Application: E-Series and F-Series Dana 80 Rea...

Crankshaft Oil Seal Remover J-35993 Applications: Detroit Diesel Series 60

Urethane rollers Low profile, 7/8" floor clearance Surface is resistant to solvents, greases and fuels Dimensions: Length 38", Width 17 1/2", Heig...

1/4 in. shank, .014 in. wire size, 4500 Max. RPM Designed for use in restricted or hard-to-reac areas Excellent for deburring, blending and cleani...

Special openings and offset head allows the high-pressure oil rail supply line to be disconnected from the fuel rail when removing fuel injectors....

This tool set works for seals and wear sleeves such as 3937111, 3904353, 3802820, 3934486, 3926126, 5259499, 6596248, 3925529 & MAHLE 67857   ...

This tool set works for seals and wear sleeves such as 3937111, 3904353, 3802820, 3934486, 3926126, 5259499,6596248 3925529 & MAHLE 67857   ...

Cummins 855 L10 ISM M11 N14 Copper Injector Sleeve Installer, Remover, and Expander ST-1244, 3377079, ST-1227, ST-880 Alternative Works on Injector...

Cummins 855 L10 ISM M11 N14 Copper Injector Sleeve Installer, Remover, and Expander Roller Style ST-880, ST-1227, ST-1244, 3377079, 416-6152-53 Alt...

***Box Included*** Designed to remove and install the injector cup  Works on Injector Sleeves/Tubes/Cup part numbers 3011934, 3070486, 3406702, FP...

To install KV series alternator and accessory drive pulleys. Applications: K38 and K50 OEM no. ref : 3376085 Sold in Bundle FEPRO4485 G2D

Cummins Air compressor & Accessory Drive Splined Gear Coupler Puller Jaws of tool are considered consumable (no warranty) G1A

This is the cam bearing Adaptor & Collet set for Cummins NT Big Cam and Small Cam engines, this also includes the N14 NH. Applications NT NH...

Cam Bearing Adaptor Set - Cummins C Series DRIVE BARS MUST BE PURCHASED SEPARATELY (FEPRO9029) 19-D

3164088 M20060-39 Cam Bearing Adapter Tool Set Bundle. This is the cam bearing adaptor set for use on the Cummins ISX/QSX Series including the ISX...

12 point box wrench on both ends 5/8" on one end; 11/16" on the other Accommodates air compressor and fuel flange bolts on NH series in-line 6 cyl...

Kit contains a fuel injector connector tube remover and fuel injector puller The fuel injector connector tube must be removed before removal of th...

Alternative to 3163020 Used for setting the gear train timing on all Cummins ISX engines (2007-2017) and Cummins X15 Included in FEPRO3021 G2C

Extra Low-profile (21.15mm height) required for minimal clearance Chrome-vanadium steel for extra strength 3/8 square drive Services 6.7L Dodge Cu...

Cummins Injector Brush

Seat cleaning brushes are Carbon Steel wire automotive brushes used to ensure perfect seating of newly installed coppers. Cut for power. Cummins In...

Cummins Rear Crankshaft Oil Seal Remover and Installer Tool Heavy Duty OEM Alternative to 3164660.  Applications include Paccar PX-6, 1989-2016 Cum...

Cummins 1989-2016 4BT 3.9L B Series 5.9L ISB 5.9L 6.7L QSB 5.9L 6.7L Paccar Engines PX-6 Rear Crankshaft Seal Remover and Installer Tool OEM Altern...

This is the camshaft gear remover kit. Application: Cummins ISB, ISC, QSC 8.3, ISL, QSL9. Alternative to 3165093 Must be used with FEPRO3054 (Sol...

Cummins ISM L10 M11 Crankshaft Front Oil Seal Wear Sleeve Remover and Installer Tool OEM 4918798 Alternative Heavy Duty Diesel Engine Repair. Cummi...

This kit contains a two piece timing pin set to use on Cummins ISX 11.9 CM2250. This is a direct replacement of Cummins part # 289174 Includes alte...

Cummins ISX 3164001 Fuel Injector Leak Test Check Kit OEM Alternative Tool. This test kit checks for combustion gas leaks back through the injecto...

Cummins ISX and X15 3164606 Cylinder Liner Press Installer Tool Alternative Liner Press works on flat-top and grooved-top liners. 5-C

Cummins ISX automatic cam timing lock. Turns the process of setting the timing pin into a one-man job. Just hand tighten the pin until it bottoms t...

Cummins ISX QSX 2007~2017 Cam Timing Tool Kit Includes Heavy Duty Steel Alternative 4 Wedge Set 4° 6° (2 pcs) and 7° 3163021 and Crank Pin 3163020....

Cummins ISX Cam Timing Wedge 4.25 Degree 2892428 OEM Alternative Tool for Gear Train Timing on all Engines 1999 to 2020. This is a replacement for ...

Cummins ISX Cam Timing Wedge 4.50 Degree 3163807 OEM Alternative Tool for Gear Train Timing on all Engines 1999 to 2020. This is a replacement for ...

Cummins ISX Timing Wedge 4.75 Degree 2892429 OEM Alternative Tool for Gear Train Timing on all Engines 1999 to 2020 Cummins ISX Timing Wedge 4.75 D...

Cummins ISX Cam Timing Wedge 6 Degree OEM Alternative Tool for 3163021 Gear Train Timing on all Engines 1999 to 2020. This is a replacement for the...

Cummins ISX Caterpillar 3400 CAT C15 Piston Ring Compressor Tool and Anti-Polishing Ring Adapter Set for 5.4 IN Bore 5299448 PT-7040 Alternative . ...

Cummins ISX Caterpillar 3400 CAT C-15 5.4 Bore Piston Ring Compressor PT-7040 5394454 Remover Installer Tool Alternative Supersedes 3163058 3163158...

Cummins ISX Engine Jake Brake Feeler Gauge Shim 7MM Adjustment Tool Alternative to 3163530 High Quality non-slip Handle. Manufactured with high sta...

Cummins ISX Injector Puller and Installer OEM: 3163483 Engine Family: Signature/ISX This driver bottoms the injector bore prior to installing the h...

This is a Master Kit for Cummins ISX timing  Includes the following: FEPRO1121: A Blue Box FEPRO3021: Cummins ISX QSX 2007~2017 Cam Timing Tool Kit...

Cummins ISX Piston Ring Compressor Adapter and Anti-Polishing Ring Alternative to 5299448, 5299447 and 5299339. *** Also Sold as kit FEPRO4048 *** 5-B