Products

Storage Box Dimensions: 13"x9"x3" 4-A 5-A

When you are faced with a rounded off, rusted tight or painted over bolt, bolt extractors will break it free Reverse spiral fluted are designed to...

Install bolt-retained bearing caps Accurately aligns bolt-retained bearing caps for easy installation Reduces the risk of damage to needle bearing...

Volvo Brake Caliper 11 Point Socket 113826 OEM Alternative for Volvo Peterbilt DAF Foden MAN Mercedes BOVA BPW SAF Trailers and European Trucks . U...

This tool enables you to quickly check the brake adjustment on class 7 and 8 trucks and trailers having S-cam brakes Features a sturdy four positi...

Ergonomic handle The tip design cradles the return spring to keep it from sliding off. Heat treated material and extra-long shaft provides stren...

Features and Benefits: BRM BNH614 Knotted End Brush 3/4" Diameter .014 Carbon Steel Filament, .875" Trim Length, 1/4" Shank Diameter Ideal fo...

Manufactured from chrome-moly steel Heat treated for wear in professional, rugged environments Fits front and rear axle wheels Designed for Isuzu,...

C9.3 C7 ACERT CAT Fuel Injector Sleeve Nozzle-Cup-Sleeve-Tube In-Vehicle Remover & Installer Tool Set Alternative Applications: L6, 442 C.I., ...

C9.3 C7 ACERT CAT Fuel Injector Sleeve Nozzle-Cup-Sleeve-Tube In-Vehicle Installer Tool Alternative  Applications: L6, 442 C.I., (7.2L), C7 ACERT,...

C9.3 C7 ACERT CAT Fuel Injector Sleeve Nozzle-Cup-Sleeve-Tube In-Vehicle Remover Tool w/Tap Applications: L6, 442 C.I., (7.2L), C7 ACERT, Diesel, ...

Dial reading face shows inch readings in black and metric readings in red Hardened stainless steel throughout 4 way measurement, inside, outside, ...

4 Way measurement for inside, outside, depth and step measurements Easy-to-read, fully adjustable dial Furnished in case .001" graduation Hardened...

0-6" range .0001" graduations 0.1" per revolution 4 measurements--inside, outside, depth and step

Applications: This is the cam bearing service adaptor set for Mack E7 ETECH, this will not work on the Mack E6 or E7 DRIVE BARS MUST BE PURCHASED ...

Cam Bearing Adaptor Set for DT 466 Series (Out of Chassis) Drive bars must be purchased separately (FEPRO9029) Alternative to OEM M20060-04 8-E

Cam bearing service bars kit used on multiple repairs. Consist of one 24 inch bar and a 55 inch bar. ST-1228-3-4, M20060 The Cam Bearing Adapte...

Cam Gear Puller ZTSE4411 Applications: DT 466/ 570, DT / DTA 360 / 466, DT 466 / 530 (PLN), DT 466E / 530E, HT 570, DT 466, DT 466E, 530, 530E, T 4...

This tool is designed specifically to remove and/or install the cam gear, without heat, and with the cam partially removed from the engine. All ne...

Camshaft Holder Set EN-46105 Alt Applications: V6 HIGH FEATURE ENGINE EN-46105 is a set of metal plates that are positioned over the ends of th...

Alternative to J-47486  Camshaft Installation Gear Timing Shoulder Bolt Tool  This is a high quality aftermarket product  Tool used with DDC proce...

The tool is use for Caterpillar 3200 & 3406 /3408 Series cam bearing Alternative to M20060-05 DRIVE BARS MUST BE PURCHASED SEPARATELY (FEP...

The tool is use for Caterpillar 3300 Series cam bearing. Alternative to M20060-06 DRIVE BARS MUST BE PURCHASED SEPARATELY (FEPRO9029) 19-E

This tool is required to remove and install injector nozzles on 3406B Engines, which were redesigned with smaller diameter fuel injection nozzle a...

This is the cam bearing service adaptor set for Caterpillar 3406E / C-15 Drive bars must be purchased separately (FEPRO9029) Alternative to M2006...

For Installation of the Adjustable Idler Assembly  Application: 3406E, C15 C16 Alternative to 9U-7255 7-D

CAT J-42083 136-4632 Automatic Engine Timing Pin and Adapter for Caterpillar 3200 3300 C7 C9 C15 C16 TDC Valve Injection Timing Tool Alternative. T...

This tool is design to compress valve springs on engines by compressing together both ends of the spring. Application: Caterpillar 3406E, 3456 and...

This is the injector sleeve installer for the Caterpillar 3126B C-7 and C-9 engines. This is a replacement for the CAT # 221-9777 150-3152 This too...

Caterpillar 3200 3300 3400 C15 C-16 C18 C27 C32 Stud Removal Tool Kit 6V-9050 Alternative. CAT Manifold Bolts and Studs Repair Set. Designed to rem...

***C15 Adapter Included*** Used to pull liner, piston and connecting rod, as an assembly, from engines Very useful when used for in-frame overhaul...

  Used to pull liner, piston and connecting rod, as an assembly, from engines Very useful when used for in-frame over hauls because it eliminates ...

Caterpillar Truck Engines 3406 3408 C15 C16 C18 Front and Rear Crankshaft Oil Seal Wear Sleeve Installer  Caterpillar truck engines 3406, 3408, and...

Caterpillar Injector Height Tool Alternative to 9U-7227 Adjustment Gauge Assembly for CAT Engines 3406E C15 and C16 Diesel Truck Tools. Application...

Caterpillar Truck CAT C15 Engine Injector Sleeve Tube Installer Heavy Duty Diesel OEM Alternative Tool. This high-quality tool group is used to ins...

The Caterpillar 1P-2402 Gauge Body Tool alternative is a liner height gauge designed to be used on CAT engines. Includes a METRIC dial indicator Bl...

The Caterpillar 1P-2402 Gauge Body Tool alternative is a liner height gauge designed to be used on CAT engines. Includes a SAE dial indicator Black...

Caterpillar and Mack Engine Barring Socket - Wrench Hand Tool for CAT 3200/3406 Series C13 C15 C16 3208 3400 3406e 3508 3512 3500 EUI MUI and Mack ...

0-12” measuring range Measure Inside, outside, depth and step Stainless steel frame for higher accuracy Lapped and ground measuring surfaces

Precision ground to + .001" Tough epoxy coating Convenient hang-up hole 35" long

CH-50636 50636 7218 Alternative Axle Hub Bridge Nut Socket  Applications: GMT900 Silverado, Sierra HDCS 9 Pin socket, ½” drive. The axle hub bearin...

This is the easy way to find air leaks in the charged air cooler systems used on class 7 and 8 truck engines Features a large 2-1/2 in., 0-60 PSI ...

Universal Drive handle used with various adapters for seal and bearing removal/installation. Same threads as short driver handle J-42183. It has t...

Socket is 2” Long The drive size is 3/4" Fits 2-9/64” ball joints Similar to Miller Tools No. C-3561 OTC8034

Used for the internal adjustment of Spicer angle-spring and multiple-lever clutches Until now, a pry bar or other makeshift method was used and of...

KWIK-CHANGE®: Interchangeable/compatible with most manufacturers. Compliant with military specification MIL-C-4109. DISTINGUISH: Between air lines...

Dual chamber unit eliminates false positives and provides for a high accuracy test One universal test fluid for both gas and diesel 16 ounce test ...

Command PRO products for when the job demands more! Superior products for less down time, longer use and overall better quality finishes. Design...