Products

Application: Ford Super Duty F-250, F-350, F-450, and F-550 equipped with 6.7L Power Stroke Diesel model years 2011, 2012, 2013, 2014, 2015, 2016...

Applications: C9, C10, C11, C12, C13 Superseded from 563-9214. Seals 533-2152 and 533-2153 will not use spacer plate. Seals 528-5683 and 52...

Fits Most Class 8 Over the Road Trucks and Trailers and Some Medium Duty Trucks. Use the tapered driver side for bearing races and the flat side fo...

Used to adjust the air brake Application: MERITOR PAN17 PAN19 PAN22 MAXX22T MAXXUS Alternative to 6401955222 640-195-522-2 DAF0907695 FREIGHTLINER...

6743A 5TH Gear Locknut Wrench 6743 Alt Used on heavy duty models with 29 and 31 spline shafts. Use 6443 on standard duty models with 23 and 30 spli...

6764A & 8110A Axle Seal Installer Tool Set Alt ST-190-B Includes High-Quality Stallion Equivalents of 6797, 6798, & 6764 6764A. It also has...

6764A Axle Seal Installer Set 6764 Alt Stallion ST-190 Includes High-Quality Stallion Equivalents of 6797 and 6798 Use this special tool to ins...

Designed to remove broken studs, bolts, socket screws and fittings Aggressive left hand spiral design for extra gripping power Spiral flutes are d...

6V-4069 3208 Fuel Drive Gear Puller Tool Kit Alt ST-325 Applications: 3208 Includes high-quality Stallion equivalent of 6V-4069 5L-4041 2H-0191 6V-...

6V-9448 Cylinder Pack Puller Used with 1U-6317 Applications: 3400 (137 mm / 129.5 mm) 6V-9448 also used for 139.7 mm (5.5 in) engine bore size

For use with a 1/2" ratchet or breaker bar Sockets will work on a variety of automobile manufacturers Set contains 7 locknut sockets to be used on...

Troubleshoots tractor trailer circuits One person can now test all the lighting Allows bypassing of troubled circuitry while on the road Eliminate...

OTC's 5-ton capacity, long 2/3-jaw, reversible gear and bearing puller is easily configurable as either a 2 or 3 jaw puller enabling you to remove...

This 2/3 jaw puller has a 5 ton capacity Features reversible jaws Maximum reach: 3-1/4"; Maximum spread: 7" Screw size: 9/16"-20 x 6-15/16" Jaw th...

Includes a bearing splitter with 4" capacity, two sets of hex push puller legs, a 8" bar type puller head mated with a custom thread forcing screw...

Quickly diagnose, repair and restore Truck and trailer harness connections Includes 7 spade Pin Tester, Pin Cleaner/Resizer and chemical contact e...

Stallion ST-179B 7.3L Powerstroke 3126 3126B C-7 C-9 Cat Caterpillar Fuel Injector Sleeve Cup In-Vehicle Remover Alt Replaces 151-4832, 372-7975 ...

7.3L 3126 3126B C-7 C-9 Cat Fuel Injector Sleeve Nozzle-Cup-Sleeve-Tube In-Vehicle Remover & Installer Tool Set Alternative  This set works on ...

7.3L Powerstroke Front & Rear Crankshaft Seal & Wear Sleeve Installer & Remover Set Alt Stallion ST-S914 This tool works on all 7.3L Po...

7.3L Powerstroke Front Crankshaft Seal Wear Ring Remover Alt Stallion ST-202 This tool works on all 7.3L Powerstroke Diesel Engines. Workshop man...

7.3L Powerstroke Ford Diesel Fuel Injector Sleeve Cup Tube Puller Remover Installer Tool and Parts Kit Includes alternatives to 303-DS105 and 303-D...

7.3L Powerstroke Ford Diesel Fuel Injector Sleeve Cup Puller Remover Installer Tool KitIncludes in-vehicle alternatives for 303-DS105 D94T-9000-B 3...

7.3L Powerstroke Ford Diesel Fuel Injector Sleeve Cup Puller Remover Installer Tool KitIncludes in-vehicle alternatives for 303-DS105 D94T-9000-B 3...

7/16 Automatic Slack Adjuster wrench is specially designed to aid in the installation and servicing of Haldex brand air braking systems on heavy d...

Used for brake adjustment on heavy-duty trucks equipped with Haldex slack adjusters Wrench with an extra long handle and a 7/16½ SH wheel 7/16½ si...

Assembly wrench 3/4" four-point drive for loosening and tightening threaded ring of through-drive shaft on output. Application: 740.0/800/804/805/...

7X-1171 Adapter Tool

8.8-Inch Ford Ring and Pinion Installation Set Alt Stallion ST-S911-B These are the most commonly used tools for the job. Refer to a manual or co...

MAN Diesel Flywheel Rotating Tool with reversable drive unit. This tool has interchangable drive sides to allow for flywheel or other obstructions....

8001-12S3 IPA 12mm Steel Tube Brush   

8090-5S IPA 1" Stainless Steel Two-Stage Brush

8409 Axle Seal Installer Tool Alt ST-234 Superseded from 5041-7

8420C Front Axle Shaft Remover Tool Set Alt 8420A 8420B Use this special tool with a C-3752 Slide Hammer and OTC adapter 8005 to remove the axle sh...

8502A 8502 3822513 Valve Lifter Remover & Installer Tool Alternative  Used while servicing valve lifters in 5.9 Liter Cummins Diesel Engines. 1...

For removing and fitting rock arm bridge Loosen the rocker arm shaft mounting fasteners evenly in stages to avoid bending the shaft. With the aid ...

85137065 (Set of 6) High Quality Alternative Stainless Steel Injector Cups This is the new sleeve design to be used with installer tool FEPRO6174 o...

85137065 High Quality Alternative Stainless Steel Injector Cup This is the new sleeve design to be used with installer tool FEPRO6174 or FEPRO0387....

Setting Tool to measure and determine the correct shim thickness needed for the new sensor. This ensures proper clearance and alignment with the ...

88800188 88880174 Volvo Cylinder Head Lifting Bracket Tool Kit with Adapter Applications: Volvo D16 Engine 2007-2016 applicable models VHD, VNL, V...

88800188 Volvo Cylinder Head Lifting Bracket Tool Applications: Volvo D12, D13 and D16 Engines Mack MP8 and MP10 Engines Use this tool to aid i...

Used on intake and exhaust valve adjustment with or without engine brakes and engine brake rocker adjustment shim Alternative to OEM 88800232 Appl...

Application Volvo FM/FH I-Shift Gearbox Application:  VOLVO AT2412C AT(O)2512C AT2812C ATO3112C Alternative to 9992671/88800246/9996917/9996...

Fits Piston 144 Diameter Cylinder Liner no. ref : 20737361  Applications: Volvo D16 Alternative to 88800313 15-A

Supersedes 9998265 and 9998531 Applications: Volvo D13, Mack MP8 Fits Piston 131 Diameter  Alternative to OEM 88800314 2-B

Fits Piston 123 Diameter Applications: Volvo D11 / MACK MP7 Sleeve number ref.: 20820662 Alternative to 88800318 J-48205 15-B

  To tighten and loosen the injector yoke fasteners For torquing injector hold downs with valvetrain in place. Use a torque wrench to tighten...

Used for measuring the frame rail height Application: Mack chassis equipped with Hendrickson Primaax rear air suspension.  Alternative to 888...

88800387 Fuel Injector Sleeve/Tube/Cup Remover Applications: Volvo Model FM12, Mack MP7 MP8 MP9 MP10 Volvo D16 Engine 2007-2016 applicable models ...