Products

Alternative to J-48704 W470589129100 High Pressure Fuel Rail Caps HDE This tool is used with the DDC diagnostic procedures and the other compliment...

Kent-Moore J-48704 High Pressure Fuel Rail Caps HDE This tool is used with the DDC diagnostic procedures and the other complimentary tools to prope...

1 3/4 Inch diameter cup brush with a 0.06 carbon steel dense fill and a 1/4 inch shaft.  Recommended for cleaning of large metal surfaces, removal...

.001 inch graduations Range: 0 - 1"  Compact magnet base

.01mm graduations Measuring faces are carbide tipped Friction/ratchet style thimbles Insulated frames Positive lever-locking clamp

Digital counter reads .001" Resolution: .0001" Microfine graduations on satin chrome Carbide tipped measuring faces Ratchet thimble

4 way measurement Solid stainless steel construction Silky smooth movement throughout .100" range per revolution .001" reading dial face

Digital display from 0-6" (150 mm) Accuracy to plus/minus .001" (0.1 mm) Stainless steel Thumb wheel for accuracy and ease of use English/metric r...

09260-39015-01 Injector Seal Tool Set Alt ST-S918 Includes High-Quality Stallion Alternatives of 09268-03020-01 and 09268-03010-01 Applications...

09260-39021-01 Fuel Injector Seal Installer Tool Set Alt ST-S919 Includes High Quality Stallion Equivalents of 09261-03020-01 & 09261-03011-01

09261-03011-01 Fuel Injector Seal Guide Installer Tool Alt ST-240 Applications: Lexus

09261-03020-01 Fuel Injector Seal Sizer Tool Alt ST-239 Applications: Lexus

09268-03010-01 Fuel Injector Seal Guide Installer Tool Alt ST-238 Applications: Lexus

09268-03020-01 Fuel Injector Seal Sizer Tool Alt ST-237 Applications: Lexus

AM-09353-2B000 Fuel Injector Seal Installer Tool Set Alternative Required to remove and replace injector seals on all Hyundai and Kia vehicles eq...

Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability Radius corner design - to extend the life of fa...

Forged from the finest chrome-molybdenum alloy steel, the best choice for strength Radius corner design extends the life of fasteners; design driv...

Made of high quality alloy steel (chrome-molybdenum) Engineered specifically for use with impact tools using the most up to date industrial specif...

33 millimeter hex Budd wheel socket Works on import truck Budd wheels Usable with 1 inch square drive impact wrench For Mack Midliners, White Volv...

Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability Radius corner design - to extend the life of fa...

Manufactured from chrome-moly steel Heat treated for wear in professional, rugged environments Fits front and rear axle wheels Designed for Hino, ...

Brush removes light scale, rust and paint from surfaces Designed for light-duty use with 0.014" high carbon steel wire Use in electric drills or f...

Use with 1" square drive impact wrench Metric sizes for Isuzu, Hino, Mitsubishi, Fuso, White Volvo, Mack Midliner and other imports Fractional siz...

1-1/2 inch hex Budd with 13-16 inch square wheel socket Works on import truck Budd wheels Usable with 1 inch square drive impact wrench For Americ...

1.16″ Stainless Steel Injector Brush

1.187″ Stainless Steel Injector Brush

1.375″ Stainless Steel Injector Brush

For extracting and dispensing fluids such as diesel fuel, motor oil, brake fluid, transmission fluid, rear differential fluid, and coolant in vehi...

Forged from the finest chrome molybdenum alloy steel - the best choice for strength and durability The design drives the side of the fastener inst...

4” length reaches past cam and rocker assembly to service head bolts Thin profile sockets will reach through the access hole and past overhead cam...

Set contains the following sizes: 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15/16 in., 1 in., 1-1/16 ...

Set contains the following sizes: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, ...

Set contains the following sizes: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, ...

Replacement Retainer 3 Clips and 3 O-Rings 1/2 Anvil Retainer Clip Refill Kit Made in America

Flexzilla Pro reusable hose end with 3/8 in. MNPT anodized aircraft aluminum fitting for 1/2 in. Flexzilla and Flexzilla Pro air hosesThis replac...

Power: 1,350 ft-lbs of nut busting torque, powered by Ingersoll Rand’s finely tuned twin-hammer impact mechanism Weight: At only 4.6 pounds, no ot...

Made of high quality steel (chrome-molybdenum) Engineered specifically for use with impact tools, using the most up to date industrial specificati...

Made of high quality steel (chrome-molybdenum) Engineered specifically for use with impact tools, using the most up to date industrial specificati...

1/2" Drive 120XP™ Flex Head Micrometer Torque Wrench 30-250 ft/lbs.

Can be used with an extension and torque wrench for accurate tightening Works on 3/4- and 1 ton Ford F-250 and F-350 trucks with automatic locking...

Power: 1,350 ft-lbs of nut busting torque, powered by Ingersoll Rand’s finely tuned twin-hammer impact mechanism Weight: At only 4.6 pounds, no ot...

Power: 1,350 ft-lbs of nut busting torque, powered by Ingersoll Rand's finely tuned twin-hammer impact mechanism Weight: At only 4.6 pounds, no ot...

Torque accuracy of +/- 3% CW between 20% and 100% of wrench capability Meets or exceeds ISO 6789 and ASME B107.300-2010 standards and specificatio...

Torque accuracy of +/- 3% CW between 20% and 100% of wrench capability Meets or exceeds ISO 6789 and ASME B107.300-2010 standards and specificatio...

Max Power - 640 ft/lbs of Nut Busting Torque Quiet - Patented technology provides a quiet design at only 91.3 dB(A) Weight - At only 2.4 lbs, it i...

1/2" NPT Female G-Style Coupler

Maximum inlet pressure of 300 pounds per square inch Maximum inlet pressure of 300 pounds per square inch Air flow of 99 standard cubic feet per m...

1/2" NPT Male G-Style Plug USE: These couplers are intended for air shop use only. Pneumatic applications that require over 60+ SCFM. MAXIMUM: 99...