ferrum

The camshaft holder and gear retainer also work on the I6 4.2L but the flywheel holder doesn't Application:  Inline 4 Cylinder 2.8L Inline 5 Cy...

EN-51368 Front Crankshaft Seal Installer Tool The front crankshaft seal on SGE is installed to the cover to a a specific depth. EN-51368 installs ...

Alternative to EN-51092 FEPRO1092 is used to verify that the camshaft fuel pump lobe is at the base circle position before installing the high-pre...

Includes: 1x FEPRO2987 Alternative GM-52987 2.0" ProShear Nut Socket Tool  1x FEPRO2988 Alternative GM-52988 2.125" ProShear Nut Socket Tool  1x F...

Used with bearing and seal drivers for part installation/removal. Alternative to RR1019TR 18-B

With convenient hot circuit indicator, red ready light glows when starter switch is connected to a hot circuit; light goes off when switch is depr...

This tool uses a post that is threaded into the deck of the engine and used as a leverage point to insert the cylinder liners into the block past ...

Designed to fit all Class 7 and 8 trucks including a wide variety of drive-lines from Spicer and Meritor Improved material and heat treat on major...

Designed for removal / installation of Hendrickson suspension Bushings Hydraulic cylinder and Pump Included Similar to TG 15042 Application: Atro...

Designed for removal / installation of Hendrickson suspension Bushings This tool must be used with Hydraulic cylinder  Similar to TG 15042 Applica...

Designed for removal / installation of Hendrickson suspension Bushings Hydraulic cylinder Included Similar to TG  15042 Application: Atro PB50-26...

Universally suitable for the coupling nut of the high-pressure fuel line of passenger cars and trucks.  Specially cut-socket (19 mm) for quick and...

Universally suitable for the coupling nut of the high pressure fuel line of passenger cars and trucks, such as DAF XF/ CF with Euro 6, MX11/ MX13 ...

Applications: DT 466 /570, HT 570 (DT 9 and 10) , Navistar 2004 - 2007 570 2004 - 2007 DT 466 2007 MaxxForce 10 2007 MaxxForce 9 2007 MaxxForce DT...

Applications: HINO (E13C) truck 390/420/446 HP (700) Used to prevent damage to the Oil Seal during installation. Installs oil seal BZ5221E and BZ...

09407-1200 Crankshaft Front Oil Seal Installer Tool Alternative  Applications: HINO (E13C) truck 390/420/446 HP (700) Used to prevent damage to th...

Hino J05C J08C J05D J08E J05E Rear Crank Seal AZ4079-F Installer 09407-1040 Alternative This tool is designed for prevent oil seal 8970728231 89707...

Hino 09407 1030A 1030 Front Crankshaft Oil Seal Installer Alternative Hino JO8C JO8E . Same as S0940-71030 This tool is designed for prevent oil se...

Hino JO8C JO8E Injector Puller and Injector Cup Sleeve Installer Remover Kit Heavy Duty OEM Alternative Diesel Trucks Tap is considered a wear item...

This tool is designed for prevent oil seal from damaged when installing it. Applicable: HINO (E13C) truck 390/420/446 HP (700)   Oil seal genuine ...

HLA Accumulator Fluid Port Wrench Alternative to RR1023HY 11-B

Design for removal / installation Volvo CAB BUSH & LEAF SPRING PIN BUSHING Application: VOLVO VNL VHD VML Removes and Installs the follow...

Design for removal / installation Volvo CAB BUSH & LEAF SPRING PIN BUSHING Application: VOLVO VNL VHD VML Removes and Installs the follow...

I-Shift Transmission Main Shaft Gear Installer Adapters 9996315 & 9996081 Tool Kit Alt Used to install VOLVO (FM 440/ 500/ FH 540) truck, Rena...

***FEPRO9014 Includes Tap*** Includes ZTSE2587A 17-25-13 Remover and ZTSE2534A 04-148-3 Installer Use this tool for 12 Valve (2 per cylinder) engi...

RR1005TR Input Shaft Bearing Driver Installer Tool Used to install the input bearing on transmissions with 2" & 1.75" input shafts. Alternative...

Application: Commonly found on class 3-5 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR etc.)  Easily remove...

Front and Rear Oil seal installer Applicable engine : ISUZU 6UZ1 engine Alternative to 109625-5403 (Front) and 109625-5412 (Rear)  19-C

Remove the rear wheel axle nut of ISUZU It can be used with torque wrench for installing and removing Material: S45C Application: ISUZU 130HP,150H...

This tool is specially designed to prevent the oil seal from getting damaged when installing it. Oil seal genuine no.: BZ4837G, BZ5016E Applicatio...

2003 - 2009 for Chevrolet Kodiak and GMC TopKick with 7.8L Duramax 7800 Isuzu 4HF1 4HG1 6HH1 6HK1 inline 6 cylinder turbo diesel Alternative to J-4...

Isuzu 4JJ1 4JB1 4JG1 4JH1 Crankshaft Rear Oil Seal Installer EN-50351 5884023590 Tool Alt. Isuzu 3.5 Ton (4JB1, 4JG1, 4JH1, 4JJ1) (130HP/150HP) EN-...

This Rear Crankshaft Oil Seal and Wear Sleeve Installer J-44642 Alternative is used on ISUZU 6.6L Duramax 2001-Later GMT800, 2500HD, 3500 with 6.6...

Front Crankshaft Seal and Wear Sleeve Installer  J-44645 Alternative  Applications ISUZU 6.6L Duramax 2001-Later GMT800 GMT800 3500 6.6 liter dies...

This Rear Crankshaft Oil Seal and Wear Sleeve Installer J-44642 Alternative is used on ISUZU 6.6L Duramax 2001-Later GMT800, 2500HD, 3500 with 6.6...

FEPRO7680 crankshaft stopper is used to retain the flywheel when required to service the flywheel or balancer and related components, and when set...

Used for installing the oil tube in the high pressure steel pipe. Can also be used for alignment. Applications: ISUZU 3.5 Ton, RT50 (4JJ1), RF10(4...

Isuzu Lower Link Bushing Remover and Installer Tool 5-8840-0257-0 and 5-8840-2327-0 Alternative for RT50 Trucks. Use for installing or removing the...

This tool is specially designed for prevent the oil seal from damaged when installing it. Oil seal genuine no.: BZ 4961E Applications: Isuzu Truc...

Isuzu NPR 4JJ1 Front Oil Seal Installer Tool Alternative 2012 to 2016 Trucks seals XZ1262E and 8-98158110-0 Alternative to OEM EN-50611 16-C

Applications: Isuzu 3.5 Ton (4JB1, 4JG1, 4JG2, 4JH1, 4JJ1), RT50 (4JJ1), TF10(4JK1) Installing and removing the valve ducting. Height between ...

Broken exhaust manifold bolt removal kit made for Cummins ISX ISX15 ***Case Included *** 12-D

Iveco Injector Cup Sleeve Remover Tool 99342149 380000123 Alternative Tube Puller for F2B G2A

Iveco Injector Cup Sleeve Remover Tool 99365056 380000157 Alternative Puller for Euro Star Cursor Engines F3A 9-A

For repair IVECO STRAILS injector service. Removes injector & injector sleeve Application: Iveco Stralis AT/AD , Cursor 10 , Cursor 13, N, Ho...

J-33880 Alternative Detroit Diesel 60 Series Injector Nozzle/Cup/Sleeve/Tube Remover w/Imported Tap The tap is considered a wear item with no warra...

Detroit 60 Series Injector Cup Installer   The head must be removed to use this tool. Your application may require additional tools so it is recomm...