ISUZU

This tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...

In-line 6 Cylinder 2.8L 4 Cylinder 2004-2007 Chevrolet Colorado GMC Canyon 2002 GMT360 (Chevy Trail Blazer, GMC Envoy, Olds Bravada). Holding the...

J-44641, J-44642, J-44644 & J-44645 Alternative Front & Rear Crankshaft Seal Installer & Remover Set Includes FEPRO4644 FEPRO4641 FEPRO...

EN-50345 is used to drive or hold the jam nut on the valve clearance adjuster, while allowing a separate wrench to pass through EN-50345 to adjust...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems...

J-43266 5-8840-2624-0 7.8L Isuzu Duramax Injector Nozzle-Cup-Sleeve-Tube Installer Alt ST-217 for 7800 2005-2010 Isuzu NPR 4HK1 6HK1. Used with...

J-43265 / 5-8840-2623-0 & J-43266 Nozzle Sleeve Remover and Installer Set Alt Stallion ST-S912 for Duramax 7800 7.8L, 2005-2010 Isuzu NPR 4HK1....

Found on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines Fits Davco Fuel filters 382 and 384 Dura...

EN-51987 6.6L Injector Remover Tool Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VI...

The SPL Bearing Cap Installer was designed to be as simple as possible. Pre-determined “installed heights” specified by the manufacturer have been...

Used to remover and install injector sleeve ME302359 Application: MITSUBISHI 6M60 engine  16-A

Fits the Most Popular Size Seals for Class 7 and Class 8 Trucks The driver is designed to hold the seals to make installation easier Includes five...

Used for the internal adjustment of Spicer angle-spring and multiple-lever clutches Until now, a pry bar or other makeshift method was used and of...

Manufactured from chrome-moly steel Heat treated for wear in professional, rugged environments Fits front and rear axle wheels Designed for Isuzu,...

Used to adjust the air brake Application: MERITOR PAN17 PAN19 PAN22 MAXX22T MAXXUS Alternative to 6401955222 640-195-522-2 DAF0907695 FREIGHTLINER...

EN-51368 Front Crankshaft Seal Installer Tool The front crankshaft seal on SGE is installed to the cover to a a specific depth. EN-51368 installs ...

J-46594 Injector Puller 6779 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VIN, plus...

The flywheel must be held in order to service the balancer and flywheel bolts. The torque required for the balancer bolt is 150 lb-ft + 180 degrees...

Front and Rear Oil seal installer Applicable engine : ISUZU 6UZ1 engine Alternative to 109625-5403 (Front) and 109625-5412 (Rear)  19-C

Install two bearing caps in one procedure on virtually all medium and light-duty u-joints An encased magnet is utilized for installation, retaining...

Use this tool to install the crankshaft front oil seal and oil slinger. Applications: 4JJ1 Alternative to EN-50349 5-8840-2855-0 16-B

Air Brake Line Release Tool J-45666 Applications: 2007-2010 C-series MD trucks; 2014 Corvette & 2014 CTS with ELSD An updated EGR cooler is use...

EN-49774 Injector Remover Tool 6777 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VI...

Injector Remover J-44639 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VIN, plus 200...

This tool is specially designed for prevent the oil seal from damaged when installing it. Oil seal genuine no.: BZ 4961E Applications: Isuzu Truc...

For use with 1/2" ratchet or breaker bar Works on 1990-93 Dodge trucks with Dana 60 manual hubs Also available as part of 4542 7-Piece Wheel Beari...

This set is a must have for diesel light cars and trucks in the global market. Includes adapters TU-15-3A, TU-15-4A, TU-15-5, TU-15-6, TU-15-13A, ...

Used for installing the oil tube in the high pressure steel pipe. Can also be used for alignment. Applications: ISUZU 3.5 Ton, RT50 (4JJ1), RF10(4...

Applications: Isuzu 3.5 Ton (4JB1, 4JG1, 4JG2, 4JH1, 4JJ1), RT50 (4JJ1), TF10(4JK1) Installing and removing the valve ducting. Height between ...

Iveco Injector Cup Sleeve Remover Tool 99342149 380000123 Alternative Tube Puller for F2B G2A

Iveco Injector Cup Sleeve Remover Tool 99365056 380000157 Alternative Puller for Euro Star Cursor Engines F3A 9-A

Isuzu Lower Link Bushing Remover and Installer Tool 5-8840-0257-0 and 5-8840-2327-0 Alternative for RT50 Trucks. Use for installing or removing the...

6.6L Duramax Diesel J-44644 Front Crankshaft Seal and Wear Sleeve Remover Puller Alt ST-196 Applications: ISUZU 6.6L 2001- Later GMT800, 2500HD...

J-43265 5-8840-2623-0 7.8L Isuzu Duramax Injector Nozzle-Cup-Sleeve-Tube Remover Alt Stallion ST-216 for 7800 7.8L, 2005-2010 Isuzu NPR 4HK1. U...