ferrum

Eaton Fuller Transmissions Countershaft Front Bearings Removal Tool RR1014TR Alternative  Eaton Fuller Transmissions Countershaft Front Bearings Re...

Eaton Fuller Transmissions Countershaft Rear Bearings Removal Tool Alternative to RR1012TR-3 is used to remove rear countershaft bearing on FR-seri...

EN-47589 Fuel Pressure Test Adapter Set Alternative  Includes six AM-9011 or AM-EN-47589-1 This adapter is used during diagnostic procedures on the...

EN-47589-8 6.6 01-07 Duramax Fuel Pressure Test / Block Off Adapter Set Alternative  Includes eight 9011 or EN-47589-1 This adapter is used during ...

EN-47971 Gen 4 & 5 Oil Pressure Gauge Preluber Adapter Tool Alt This tool works on Generation IV & V V8 engines. If you're working on a Gen...

EN-48313 Alternative Timing Chain Retainer Tool Set  Verify your application with the info provided. EN-48313 Timing Chain Retention Tool works on...

EN-48366 Camshaft Alignment Timing Tool This tool only works on European-built models. The only way to be 100% certain you have the right alignment...

EN-48368 Alternative Camshaft Alignment Timing Tool Set The only way to be 100% certain you have the right alignment tool, is to purchase SKU SAAB-...

Applications: High Feature V6 (2.8L, 3.0L, 3.6L) The camshafts must be held at TDC to properly set timing, especially once the inner timing chain i...

This tool is required to help keep the lower timing gear tensioner stationary while the cylinder head is removed from the I4,I5,I6 engines. If thi...

Application: High Feature V6 or ECOTEC with SIDI The SIDI high-pressure fuel pump mounts upwards towards the inside of the head, and must be ins...

EN-48932 6725 Alternative Belt Tension Compressor Applications: LaCrosse with eAssist, Malibu ECO Used during engine drive belt replacement and sta...

For Injector Sleeves 8-97606661-0, 8-98018462-01, 98018462 This tool set allows stainless steel or brass injector nozzle sleeve replacement wit...

Timing Chain Retainer Set Alternative to EN-49982Applications: HF V6 Engines - Light Duty Trucks Buick Enclave model years 2013, 2014, 2016, and...

EN-50345 is used to drive or hold the jam nut on the valve clearance adjuster, while allowing a separate wrench to pass through EN-50345 to adjust...

Use this tool to install the crankshaft rear oil seal and oil slinger. Applications: 4JJ1 Alternative to EN-50349 5-8840-2855-0 16-B

EN-50351 588402359 5884023590 5-8840-2359-0 Crankshaft Rear Oil Seal Installer Alternative  Applications: Isuzu 3.5 Ton (4JB1, 4JG1, 4JH1, 4JJ1...

EN-51146 Alternative Injector and Rail Assembly Replacer Includes -1 Installer and -2 Remover. Used with EN-51146-100 and EN-51146-150 to service t...

EN-51146 EN-51146-100 EN-51146-150 GM Opel Injector and Rail Assembly Replacer Master Tool Kit AltThis is a high-quality aftermarket tool kit.Used ...

EN-51146-100 Alternative Injector Rail Assembly Remover Plate EN-51146-100 allows the use of EN-51146 Injector Remove on SGE family engines

EN-51146-150 Alternative Remover Adapter Studs Used with EN-51146

EN-51955 Alternative Injector Seal Installer & Sizer Tool Set  Works on injector 55515113(2.0L) & 12733960(2.7L) Applications: Acadia 2.0L...

Designed to remove broken studs, bolts, socket screws and fittings for high torque applications Aggressive left hand spiral design for extra gripp...

Material: CR-V socket with satin & bright chrome plated, S2 bits with manganese phosphate  Contents:  18- 1/4" Dr.         5- Star-E: E4-5-6-...

It is necessary to hold the flywheel in a secure position while servicing the balancer retaining bolt. The FEPRO4654 provides for damage free secu...

Ford Truck 6.0L 6.4L Powerstroke Fuel Injector Sleeve Cup Remover and Installer Tool Kit for Engines 2003 to 2010 F250 F350 F450 F550 Maxxforce 7 2...

Ford 7.3L Powerstroke or T444E Damper Crank Oil Seal Installer Tool ZTSE4310 303-484 Alt. This Ford Damper/Crank Oil Seal Installer ZTSE4310 is an ...

This tool holds the drive pinion flange. Universal design with 1/2" slots fits flange bolt centerlines up to 2-5/8". Includes 5/16" and 3/8" bolts...

Application: Navistar 6.9L 7.3L Maximum fuel economy requires precise injector timing.  This tool securely grips the front of the fuel injection p...

Ford Powerstroke 6.7L Injector Removal Tool 310-230 Alternative for F-250 F-350 F-450 F-550 2011-2018 Diesel Engines. With our Ford Powerstroke Inj...

When install / removal the pinion nut , use this tool to achieve proper torque specifications and stake the nut to the pinion Torque Spec for fr...

Includes J-43282-RR / J-43282-2 Part of J-43282 and 5-8840-9061-0  Applications: Medium Duty Truck, NPR, Isuzu 4.8L 4HE1 and 5.2L 4HK1 diesel engi...

Includes J-43282-FT / J-43282-1 Part of J-43282 and 5-8840-9061-0 Applications: Medium Duty Truck, NPR, Isuzu 4.8L 4HE1 and 5.2L 4HK1 diesel engine...

Works on Case, Caterpillar, GM, John Deere, Waukesha and White diesel engines Alternative to OTC 7121 OTC7121 Designed to remove pencil nozzles...

This tool is a must when servicing Mitsubishi Trucks. Mitsubishi uses a slinger (wear ring) installed onto the crankshaft, this prevents crankshaft...

Fuso 6M60 CAT 6D16 Truck Crankshaft Front Oil Seal Installer Tool MH062710 Alternative 16-A

In-line 6 Cylinder 2.8L 4 Cylinder 2004-2007 Chevrolet Colorado GMC Canyon 2002 GMT360 (Chevy Trail Blazer, GMC Envoy, Olds Bravada). Holding the...

The camshaft holder and gear retainer also work on the I6 4.2L but the flywheel holder doesn't Application:  Inline 4 Cylinder 2.8L Inline 5 Cy...

EN-51368 Front Crankshaft Seal Installer Tool The front crankshaft seal on SGE is installed to the cover to a a specific depth. EN-51368 installs ...

Alternative to EN-51092 FEPRO1092 is used to verify that the camshaft fuel pump lobe is at the base circle position before installing the high-pre...

Used with bearing and seal drivers for part installation/removal. Alternative to RR1019TR 18-B

With convenient hot circuit indicator, red ready light glows when starter switch is connected to a hot circuit; light goes off when switch is depr...

This tool uses a post that is threaded into the deck of the engine and used as a leverage point to insert the cylinder liners into the block past ...

Designed to fit all Class 7 and 8 trucks including a wide variety of drive-lines from Spicer and Meritor Improved material and heat treat on major...

Simplifies and expedites the removal of heavy-duty yokes on drive shafts, transmissions and rear-end differentials without damage to yokes or other...

Designed for removal / installation of Hendrickson suspension Bushings Hydraulic cylinder and Pump Included Similar to TG 15042 Application: Atro...

Designed for removal / installation of Hendrickson suspension Bushings This tool must be used with Hydraulic cylinder  Similar to TG 15042 Applica...

Designed for removal / installation of Hendrickson suspension Bushings Hydraulic cylinder Included Similar to TG  15042 Application: Atro PB50-26...