GENERAL TOOLS

KL50011 CAT C-10,C-11,C-12,C-13 Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Counter Bore Tool Kit.  The ...

KL50007 International/Navistar Maxxforce 11L/13L (Big Bore) Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 ...

KL50006 Cummins NT/NH, N14 Counter Bore Cutter Assembly Tool NOTE: This is only the cutter head assembly for the 50000 Counter Bore Re-Conditioning...

KL50001 International/Navistar DT466, DT530, DT570, HT570 Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Co...

6.4L 6.2L 5.7L 2042300090 Front Damper & Crankshaft Seal Installer Tool Set Alt ST-306Use these special tools in conjunction with appropriate s...

5041-44 Dana 44 (FBI 216) Inner Axle Seal Installer Adapter Tool Alt ST-305This is used with 5041A on the inner axle seal on the intermediate axle ...

303-1250 303-1250-01 7.3L 6.2L 5.0L 3.7L 3.5L Rear Main Seal Installer Tool Alt ST-273-B This tool comes with the updated -01 which works on 2020+ ...

310-199  Injector Teflon Seal Calibration Tool Alt ST-243 After fitting injector Teflon seal it must be sized to ensure correct fitment. Applicatio...

205-336 T93P-4020-A Drive Pinion Depth Gauge Tube Alternative Application: F-Series Front Axle Rear Drive Axle/Differential : LS : 2005 Front Driv...

Measures bonded brake lining from 0 to 1/2" in 1/64" graduations Place gauge over brake shoe to take reading For use with larger hard to remove...

Removes truck oil filters from 4-1/2" - 5-1/4" (115 to 135mm) in diameter Caution: Wear eye protection Do not use with power tools Extra band for ...

1/4" male national pipe thread Maximum inlet pressure of 300 pounds per square inch Maximum air flow of 40 standard cubic feet per minute Maximum ...

KWIK-CHANGE®: Interchangeable/compatible with most manufacturers. Compliant with military specification MIL-C-4109. DISTINGUISH: Between air lines...

OEM no. ref.: 9990024 Application: D9 D11 D12 D13 D16

Non scratching, heavy duty, composite material body Push button quick coupling safely vents the air line Safety style disconnect eliminates flying...

Operating pressure: 0 to 174 psi Flow rate at 6 bar: 28 cfm (Δp = 8.70 psi) Temperature: +5°F to +158°F Non scratching, heavy duty composite mater...

With shop air as the energy source, pump has the power & oil capacity to drive even the large 55 ton rams Ideal all around power source for do...

Used for brake adjustment on heavy-duty trucks equipped with Bendix slack adjusters Extra deep 9/16" hex allows greater reach to recessed adjuster...

Most Power Dense - Best Combination of Power and Size. POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque & 1,500 ft-...

Most Power Dense - Best Combination of Power and Size. POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque & 1,500 ft-...

Produces vacuum or pressure at the turn of a switch Comfortable ergonomic design One-finger trigger vacuum / pressure release Has durable, accurat...

9011A Fuel Pressure Test Adapter 9011 EN-47589-1 Alternative This adapter is used during the diagnostic procedures on the GM/Chevy 6.6L (LB7 and LL...

5P-4194 3208 Front Crankshaft Seal Installer

9U-5671 Receiver Sleeve Adapter Alternative Applications: 3114 and 3116 Engines 9U-5671 is designed to clear the valve springs and provide adequate...

1U-6317 Bridge  Used with 6V-9448

325-6575 C9.3 ACERT Injector Cup Sleeve Alternative Applications: L6, 568 C.I., (9.3L), C9.3 ACERT, Diesel, OHV, 24 Valve, TURBO

C9.3-261-0193-COR C9.3 Acert 6PK Injector Cup and O-Ring Kit

C7-261-0193-COR C7 Acert 6PK Injector Cup and O-Ring Kit

261-0193 C7 ACERT Injector Cup Sleeve Alternative  Applications: L6, 442 C.I., (7.2L), C7 ACERT, Diesel, OHV, 18 Valve, TURBO

125-7059 Reaction Sleeve Alternative  Applications: HUEI 3114, 3116 and 3126 Engines

4C-8713 Reamer Shank Applications: 3114, 3116, 3126, 3126 MUI, and 3126 HEUI Engines.

9U-6101 Reamer Group Alternative  Applications: 3114, 3116 and 3126 Engines

4C-8715 Guide Bushing Alt Applications: 3114, 3126, and 3116 Engines

169-3374 3176 and 3176B Injector Sleeve Removal Kit Used to quickly and easily remove brass injector sleeves with no brass chips to fall into the e...

462-9174 12-892-04 Low Temperature EGR Core Puller Remover Tool This tool works on CAT Caterpillar CT11 & CT13.

TU-15-43 Diesel Compression Test Adapter Tool Used with J-6692-B, 303-D092, AM-303-D092, or J-26999 Compression Test Gauges Injector adapter with q...

456-7526 Timing Pin Tool Includes the 208-9388

238-9586 Engine Barring Tool

7X-1171 Adapter Tool

OTC 7117 6V-4061 Caterpillar Fuel Injector Nozzle Puller Tool Designed to remove pencil nozzles on Cat engines. The tool applies straight, even pul...

Valve Spring Compressor J-35580-B Includes -3 adapter Application: Detroit Diesel Series 60

J-25447-B Remover/Installer Applications: DD60 Detroit Diesel 60 Series

J-41479-10 Crankshaft Rear Seal Installer Adapter Alt ST-197-10 The rear crankshaft seal on Gen V V6/V8 engines is installed in reverse to Gen IV e...

303-1531 5.2L, 5.0L, 3.3L, 3.0L, 2.7L Crankshaft Front Seal & Harmonic Balancer / Vibration Damper Installer Tool Alt ST-304 This tool includes...

EN-48932 09244-G2100 6725 Heavy Duty Belt Tension Compressor Tool Alt ST-329 Compresses belt tensioner spring when replacing the engine drive belt...

2025002090 3.6L 2016+ Right Timing Chain Tensioner Holding Tool Alt ST-314 Applications: Applications of 3.6L Pentastar 2016 - Current

2025001090 3.6L 2016+ Left Timing Chain Tensioner Holding Tool Alt ST-313 Applications: Applications of 3.6L Pentastar 2016 - Current

ST-1229 Cummins Cylinder Liner Driver