Eligible for Promotions

JDG2073 Alternative John Deere Servicegard Measuring Tool  Applications include 2.4L John Deere Use to transfer measurement of front and rear posit...

JDG1952A Alternative 9.0L Rear Wear Sleeve and Seal Installer Tool  This tool works on 9.0L PowerTech Engines Used with FEPROJD1953 and JDG1954 9-B

JDE51 Alternative John Deere Clutch Adjusting Tool Clutch tool to adjust transmission clutch release levers and PTO clutch operating levers. G2D

JDE32 Alternative John Deere Servicegard Clutch Finger Adjusting Gauge Tool  Use to adjustment of clutch fingers G2C

JD258 Alternative Seal Installation Pilot Tool  Used to assist in installing carbon stop seal on fuel injector nozzle Applications: John Deere Powe...

JD264 Alternative Clutch Adjusting Gauge Tool  This tool is used to adjust the steering clutch pressure plate fingers. Used on the steering clutch ...

JDG787 Alternative John Deere Servicegard Forcing Screw Spud  Use with JDG721 Hub Puller Kit to remove vibration damper pulley G2C

JDG405 Alternative John Deere Servicegard Camshaft Bushing Service Set  Use to remove and install the camshaft bushings Use with D01299AA, D01300AA...

JDG10539A Alternative John Deere Servicegard Coolant Tank Adapter Tool  Use to pressure test the engine cooling system. Use with D05104ST. 9-A

JDG10544 Alternative John Deere Servicegard Seal Remover Tool  Used to remove the front seal wear sleeve 9-B

KJD10420 Alternative John Deere Servicegard Seal Installer Tool  Use with KML10018-4 and KML10018-7 to assemble the hydraulic steering assembly 9-E

KJD10422 Alternative John Deere Servicegard Seal Installer Tool  Use to install the king pin seal ring DANA axle 9-A

JDG1515 Alternative Fuel Injection Nozzle Tool Kit John Deere Servicegard  Used to remove the injectors from Powertech engines 4.5L and 6.8L or Mod...

Applications: IVECO Daily 35 from 2014. Designed to remove the front wheel hub nut The Iveco Daily 35 utilizes a removable stub-axle on the f...

This is the adapter to remove MACK E-6 cam bearing. Alternative to M20060-36 FEPRO9029 is required  19-D

Assembly wrench 3/4" four-point drive for loosening and tightening threaded ring of through-drive shaft on output. Application: 740.0/800/804/805/...

  To tighten and loosen the injector yoke fasteners For torquing injector hold downs with valvetrain in place. Use a torque wrench to tighten...

A4720780273 A0249976445 Detroit DD13 DD15 DD16 Injector Tube Alternative Works in place of injector tube DDCA4720780273 and 6920900 It is up to you...

Gauge to determine center distance between camshaft and high-pressure pump Application: CURSOR C11/C13   Models: Heavy ON/OFF Road OEM no r...

Used to install and remover front crankshaft seal  Alternative to 1903058  Oil seal no.ref.:1923376 Application: Euro 6 / MX-11 6-B ***  ...

4312298 Alternative Retaining Ring  Engine Family:ISX15 CM2250ISX15 CM2250 SNISX15 CM2350 X101PowerGen QSX15 CM2250PowerGen QSX15 CM2250 ECFQSX15 C...

Function: For removing and fitting cylinder head (ADAPTER) Application: VOLVO D13 Alternative to OEM 88880174 This tool must used with FEPRO0188 ...

23538840 Alternative DD60 Injector Tube  Applications: L6, 858 C.I., (14.0L), Detroit Diesel 60 Series Used with FEPRO6904 or FEPRO0424 G1B

EN-51146-150 Alternative Remover Adapter Studs Used with EN-51146

Both safely and efficiently removes virtually all Rockwell self-adjusting slack adjusters. It is simple to slip on for instant results, saving each...

This tool is to properly diagnose and assist in repairing the PACCAR fuel system.  Application: MX-11/MX-13, PACCAR ENGINE/EPA10/EPA21 Alternati...

10259B Engine Actuator Compressor Assembly Tool Alt 10259A Applications include: 2012 (FF) - Systems (9 - Engine, 1.4L I4 Multiair 16V) 2013 (FF, ...

Saab Camshaft Alignment Master Timing Tool Set The only way to be 100% certain you have the right alignment tool, is to purchase this master set, w...

EN-48366 Camshaft Alignment Timing Tool This tool only works on European-built models. The only way to be 100% certain you have the right alignment...

EN-47971 Gen 4 & 5 Oil Pressure Gauge Preluber Adapter Tool Alt This tool works on Generation IV & V V8 engines. If you're working on a Gen...

307-677 Actuator Reset Socket Tool Alt

3823374 PT-2205-25A Alternative NH/NT 855 Cutter Plate Assembly Tool  Used with PT-2250-B or PT-2050-D Applications: 855 NH N-14 5 1/2 15-D

Two 1/2" - 20 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

Two 9/16" - 18 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

Two 3/4" - 16 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

Two 1/2" - 13 Axle Stud Adapters Manufactured from high-grade steel for strength and durability Black oxide finished coating resists corrosion ...

For screw plug removal and installation on fluid reservoir on condenser Also used for front wheel plastic cover. Application: BENZ (W203/W209) ...

Install two bearing caps in one procedure on virtually all medium and light-duty u-joints An encased magnet is utilized for installation, retaining...

Hydraulic kit for removing and installing the driveshaft flange VOLVO and DAF. Requires the connection of a manual or pneumatic-hydraulic pump. App...

Alternative to 303-771 ZTSE4518 Original equipment seals will not have a wear ring. If a service part has previously been installed, it will have a...

Alternative to 303-762 ZTSE4517 Removes the front seal and wear ring from crankshaft  Applications include: Engine — 4.5L Diesel : Low Cab Forward...

Alternative to 303-1260 Removes the front seal and wear ring from crankshaft  Applications include: 2008-2010 Ford F-250, F350, F450, F-550 6.4L F...

Ensures the transmission selector inhibitor switch is properly aligned for correct transmission operation Application: 2019-later Medium Duty Lo...

Used to react against the crankshaft end to pull the seal out. Application: ISUZU 6.6L Engine; 2001- Later GMT800, 2500HD, 3500 with 6.6-liter Du...

227-2911 High Quality Alternative 3126 Fuel Injector Sleeve Cup  Alternative to CAT Caterpillar 124-0811 157-8373 159-0300 227-2911 WT3126PD is use...

240-1002 High Quality Alternative Injector Tube Sleeve This cup is an equivalent to 119-3061, 1193061, FP1193061 and 437655116. Applications - Cate...

3417717 High Quality Alternative Stainless Steel Sleeves (Set of 6) 3417717, FP3417717, 419619241 Applications may include: L6, 611 C.I., (10.0L)...

3417717 High Quality Alternative Stainless Steel Sleeve 3417717, FP3417717, 419619241 Applications may include: L6, 611 C.I., (10.0L), L-10, Dies...