DURAMAX

This is a replacement set of 2 thick feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6400-9A Minimum thickness of .2...

Pitman Arm Puller is designed to remove pitman arms on Sheppard M100 gearboxes. Eliminates dangerous hammering and cutting torch methods. May be us...

This is a replacement set of 2 thin feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6410-4A Minimum thickness of .14...

Adjustable jaws with locking feature to suit both hexagon & octagon wheel bearing lock nuts Includes three sets round & three sets square ...

EN-48313 Alternative Timing Chain Retainer Tool Set  Verify your application with the info provided. EN-48313 Timing Chain Retention Tool works on...

DT-52987 Alternative ProShear Nut Socket - 2.0 in  The wheel hub and brake rotor assembly is held on the full-floating rear axle by a hub nut again...

DT-52989 GM-52989 Alternative ProShear Nut Socket 2.375 in.  The wheel hub and brake rotor assembly is held on the full-floating rear axle by a hub...

Application: Commonly found on class 3-5 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR etc.)  Easily remove...

EN-51955 Alternative Injector Seal Installer & Sizer Tool Set  Works on injector 55515113(2.0L) & 12733960(2.7L) Applications: Acadia 2.0L...

Material: CR-V socket with satin & bright chrome plated, S2 bits with manganese phosphate  Contents:  18- 1/4" Dr.         5- Star-E: E4-5-6-...

Kit Includes  FEPRO0386 - PITMAN ARM SPREADER ALTERNATIVE TO TG 10386 FEPRO0388 - INTERMEDIATE PITMAN ARM PULLER ALTERNATIVE TO TG 10388 FEPRO0389 ...

Application: Commonly found on class 6-8 transportation trucks and equipment. (Kenworth, Peterbilt, Freightliner, Mack, Volvo, etc.)  Easily remov...

This Rear Crankshaft Oil Seal and Wear Sleeve Installer J-44642 Alternative is used on ISUZU 6.6L Duramax 2001-Later GMT800, 2500HD, 3500 with 6.6...

8420C Front Axle Shaft Remover Tool Set Alt 8420A 8420B Use this special tool with a C-3752 Slide Hammer and OTC adapter 8005 to remove the axle sh...

DT-52988 ProShear Nut Socket - 2.125 in Alternative The wheel hub and brake rotor assembly is held on the full-floating rear axle by a hub nut agai...

Front Crankshaft Seal and Wear Sleeve Installer  J-44645 Alternative  Applications ISUZU 6.6L Duramax 2001-Later GMT800 GMT800 3500 6.6 liter dies...

For Injector Sleeves 8-97606661-0, 8-98018462-01, 98018462 This tool set allows stainless steel or brass injector nozzle sleeve replacement wit...

This Rear Crankshaft Oil Seal and Wear Sleeve Installer J-44642 Alternative is used on ISUZU 6.6L Duramax 2001-Later GMT800, 2500HD, 3500 with 6.6...

Eliminates airlocks and refills entire cooling system in seconds including heater core without the time consuming process of bleeding and purging...

Application: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...

This tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...

J-44641, J-44642, J-44644 & J-44645 Alternative Front & Rear Crankshaft Seal Installer & Remover Set Includes FEPRO4644 FEPRO4641 FEPRO...

Used to react against the crankshaft end to pull the seal out. Application: ISUZU 6.6L Engine; 2001- Later GMT800, 2500HD, 3500 with 6.6-liter Du...

Designed to fit all Class 7 and 8 trucks including a wide variety of drive-lines from Spicer and Meritor Improved material and heat treat on major...