877-337-7864
(786) 275-4130
(M-F 8 AM - 5:00 PM EST)
Now Open In Medley, FL
877-337-7864
786-275-4130
(M-F 8 AM - 5:00 PM EST)
Now Open In Medley, FL
877-337-7864
(786) 275-4130
(M-F 8 AM - 5:00 PM EST)
Now Open In Medley, FL
877-337-7864
786-275-4130
(M-F 8 AM - 5:00 PM EST)
Now Open In Medley, FL
KL50000 Counter Bore Re-Conditioning Tool The K-Line 50000 is used to resurface the seat to inlay a shim. No special bases required. The procedure...
View full detailsThis tool can be used with FEPRO1401 to compress the rings and allow the piston to be inserted into the cylinder bore without damage to the ring s...
View full detailsKit Includes FEPRO0386 - PITMAN ARM SPREADER ALTERNATIVE TO TIGER 10386 FEPRO0388 - INTERMEDIATE PITMAN ARM PULLER ALTERNATIVE TO TIGER 10388 FEPR...
View full detailsApplication: Commonly found on class 6-8 transportation trucks and equipment. (Kenworth, Peterbilt, Freightliner, Mack, Volvo, etc.) Easily remov...
View full detailsApplication: MAN/MERCEDES TRUCK Size: (H64.7, 12POINT, 1" ) Nut no. ref: 9463510072 MAN oem no. ref : 80996030176 3-C
This tool is used to remove the crankshaft sleeve from the engine. Application: DD60, Detroit Diesel 60 Series Alternative to J-41329 3-B
Detroit Diesel DD13 and DD15 Crankshaft TDC Locating Tool Alternative to J-48630 Detroit Diesel DD13 and DD15 Crankshaft TDC Locating Tool J-48630 ...
View full detailsJ-35642 Crankshaft Gear Remover & Installer Tool Applications: Detroit Diesel Series 60 This tool is use to remove and install the crankshaft g...
View full detailsThis tool is used to install the rear main oil seal. Applications: MBE 4000, Detroit Diesel Alternative to J-45393 1-B
Detroit Diesel DD13 DD15 Idler 3 Cantilever Tool J-47487 Alternative Used with the DDC procedure to set the gear timing for cam installation. Used ...
View full detailsDetroit Diesel Series 60 Front and Rear Crankshaft Seal and Wear Sleeve Installer Heavy Duty OEM Alternative J-35686-B Two Cycle 92 12.7L 14L Engin...
View full detailsThis tool is used to rotate the crankshaft during engine service on 60 series Application: DETROIT DIESEL 50/60/92 SERIES Alternative to J-362...
View full detailsAlternative to OEM W950589006100 Also known as DSN012T20022 Alternative Insert the clutch disc alignment tool (W950589006100) in the pilot bear...
View full detailsTool to remove camshaft bearing caps Use with the FEPRO6375 Application: DD13 DD15 Alternative to J-48883/W470589023300 Using Camshaft cap pul...
View full detailsJ-33880 Detroit Diesel 60 Series Injector Nozzle/Cup/Sleeve/Tube Remover Alt ST-289 w/Imported Tap Applications: DD60 Detroit Diesel 60 Use J-4690...
View full detailsDetroit Diesel DD15 DD16 Engine Timing Tool Bundle Includes TDC Locating Pin Barring and Camshaft Timing Tools Heavy Duty Solid Steel Alternative t...
View full detailsEliminates airlocks and refills entire cooling system in seconds including heater core without the time consuming process of bleeding and purging...
View full detailsJ-41065 PT-2200-90 DD60 Counter Bore Cutter Adapter Kit Detroit Diesel 60 Series This kit is used with PT-2250-B This kit includes: PT-2200-90 Cut...
View full detailsThis tool is used to properly hold the cam gear stationary while removing/installing the cam gear retaining bolt without damage. The tool install...
View full detailsApplication: Commonly found on class 3-8 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR, Kenworth, Peterbil...
View full detailsDetroit Diesel Series 60 Front and Rear Crankshaft Seal and Wear Sleeve Installer Heavy Duty OEM Alternative J-35686-B Two Cycle 92 12.7L 14L Engin...
View full detailsUsed to remove the unit pump. Used with the FEPRO8883 Application: DETROIT DIESEL DD13 DD15 / MBE900 Alternative to J-46375-A Using Camshaft cap p...
View full detailsJ-45876 Cylinder Pack Liner Puller Remover Tool 5875 Applications: Detroit Diesel 60 Series 12.7L and 14.0L with EGR. MTUS2000 DD13 DD15 DD16 Not...
View full detailsPT-6410-5 PT-6400-C to ZTSE2536 Conversion Kit Alt Converts PT-6400-C to ZTSE2536. Includes High-Quality Aftermarket Alternatives of: 2x PT-6410-...
View full detailsJ-35642 Crankshaft Gear Remover & Installer Tool Applications: Detroit Diesel Series 60 This tool is used to remove and install the crankshaft ...
View full detailsJ-47411 Compressor Test HDE Adapter This tool is used with the previously release compression test gage to compression test or leak test on the DD1...
View full details***Box Included*** Torque multiplier can turn small amounts of input torque into large output torque to loosen the toughest threaded fasteners whi...
View full detailsSpecially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems 8 ...
View full detailsThis tool has two sets of rubber sleeves supplied with it for each expanding driver Range of 1.1 25" to 2.69" (28.58 - 68.3mm) Very easy on the be...
View full detailsWorks on OEM electrical connectors used on trucks and equipment such as Caterpillar, Kenworth, Peterbilt, Freightliner, Mack and more Also used on...
View full detailsW950589006100 Clutch Align Tool Also known as DSN012T20022 Applications: Detroit DT12 transmission used in Freightliner with the DD13 or DD15 ...
View full detailsSpecially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems. 6...
View full detailsDetroit Diesel 60 Series Jake Brake Retaining Ring Installer Tool J-45976 and M30157 Alternative. 4-C
Detroit Diesel DD13 DD15 DD16 19MM High Pressure Fuel Line Socket and Engine Brake Adjustment Tool Jake Brake Feeler Gauge 4.6MM and 4.1MM J-48770 ...
View full details09330 Chadwick & Trefethen Carbon Straight LP Reamer Size 33 Adjustment Range : 1 7/8" - 2 3/16" 1.87 - 2.187 ** Replacement Carbon Steel B...
View full detailsInstalls into the oil priming port in the oil module Allows for proper engine pre-lubing, preventing dry starts after engine service For use with ...
View full detailsRemove crankshaft oil seal Applications: Detroit Diesel Series 60, TWO CYCLE 71, and TWO CYCLE 92 Insert notching tool between back-up ring and...
View full detailsKL50003 Detroit Diesel 60 Series Counter Bore Cutter Assembly NOTE: This is only the cutter head assembly for the 50000 Counter Bore Re-Conditionin...
View full details34900 Diesel Compression Tester Tool Set Alt #2 BACHARACH Allow a Bacharach Brand adapter to be used without tester. No. 260-01 #3 1P-5564 For test...
View full detailsJ-47407-128UPD DD13 Cylinder Liner Installer Adapter Alternative Also referred to as J-47407-128 in some manuals. Used with J-47407 or FEPRO7407 ...
View full detailsTU-15-25 DD40E, 7.3L, T444E, DT466E DT530/HT530 Compression Test Adapter ToolApplications: 1994 - 2003 Detroit Diesel Series 40E, 7.3L , T444E, DT4...
View full detailsThis tool is hand operated. It cuts the counterbore by turning the head with a 1/2" drive ratchet and applying downward pressure to the cutter head...
View full detailsFits Most Class 8 Over the Road Trucks and Trailers and Some Medium Duty Trucks. Use the tapered driver side for bearing races and the flat side fo...
View full detailsApplication: Detroit Diesel 60 series Alternative to J-46305 3-A
J-6692-B Detroit Diesel Compression Test Gauge 5872 Works on many makes and models including Detroit 60 Series, DD60, Two Cycle 53, Two Cycle 71, T...
View full detailsJ-35906-6A Late Model DD60 Cam Gear Pilot Adapter Alt ST-256 Applications: Late Model 60 Series Detroit DieselReplacement Bolt for FEPRO5906
High Quality Alternative 23534745 DD60 Injector Tube Applications: L6, 858 C.I., (14.0L), DD60, Detroit Diesel 60 Series Used with FEPRO0424 11-C
Provides fast and effective removal and installation of even the most seized wheel studs. Remove and install 10 studs in only 10-15 minutes. Elim...
View full details