Products

J-46594 Injector Puller 6779 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VIN, plus...

J-47411 Compressor Test HDE Adapter This tool is used with the previously release compression test gage to compression test or leak test on the DD1...

J-47411 Compressor Test HDE Adapter ( 5/16 NPT Fitting ) This tool is used with the previously release compression test gage to compression test or...

J-47450-1 Cam Gear Aligner Tool Sold in Kit FEPRO4514 

J-47450-1 & J-44426 Cam Gear Aligner Tool  Sold in Kit FEPRO4514  1-A

J-47908 Detroit Diesel 50 60 Series Compressor Test Adapter Tool Alt Applications: DD50 DD60 According to the service manual, it is recommended to ...

High quality stainless steel tank eliminates corrosion and holds up to 3 gallons Heavy duty hand pump assembly provides smooth operation and long ...

J-48641 Ring Gear Stopper NI-48641 Required to hold the engine stationary while tightening the harmonic balancer to specs.Use J-44716 or J-50288 on...

J-48761 99970-48761 4.0L Ring Gear Stopper Flywheel Locking Tool Alt ST-310 2005-2012 Pathfinder (R51) VQ40 4.0L2005-2012 Xterra (N50) VQ40DE 4.0L2...

J-54402 Injector Puller Tool NI-54402 Alternative This is a High-Quality Aftermarket Tool!  Applications: Titan XD 5.0L Cummins: 2016, 2017, 2018...

J-54411 4919040 Fuel Pump Remover Replacer Tool Alt ST-326 Applications include Cummins and Nissan.  

John Deere JD-49 JD-53 JD-203 Alternative Clutch Alignment Tool Application: 3010, 3020, 4000, 4010, 4020, and 4320The clutch alignment tool or pil...

JD227 Alternative Pressure Plate Gauge Tool  The JD-227 Clutch adjusting gauge with current modifications is used to adjust the engine clutch press...

JD254A Timing Tool John Deere 4039 4045 6059 6068 Servicegard Alt Works on the 4039, 4045, 6059 and 6068 engines. Supersedes JD254 10-A

JD258 Alternative Seal Installation Pilot Tool  Used to assist in installing carbon stop seal on fuel injector nozzle Applications: John Deere Powe...

JD264 Alternative Clutch Adjusting Gauge Tool  This tool is used to adjust the steering clutch pressure plate fingers. Used on the steering clutch ...

Includes Alternative to JDG467 and JDG468 Use on 6081, 6090, 6466 and 6619 engines Used to install Front Wear Sleeves 9-B

JDE32 Alternative John Deere Servicegard Clutch Finger Adjusting Gauge Tool  Use to adjustment of clutch fingers G2C

JDE38B Alternative Slide Hammer Fuel Injection Nozzle Puller Tool  This tool is used to remove pencil-type fuel injection nozzles Applications incl...

JDE51 Alternative John Deere Clutch Adjusting Tool Clutch tool to adjust transmission clutch release levers and PTO clutch operating levers. G2D

JDE61 Clutch Adjusting Plate Tool John Deere Servicegard Alt This tool is sometimes used with JDE52A Applications: 3010, 3020, 4000, 4010, 4020, 43...

Used to locking the flywheel on engines Application : 4024, 4039, 4045, 4239, 4276, 6359, 6619, 6059, 6068, 6076, 6081, 6090, 6105, 6125 and 61...

JDE92 Injector Socket Tool John Deere Servicegard Tool Alt Special service tool - Use on 3029, 4039, 4045, 6059, 6068, 6076, 6081, 6101, 6466 and 6...

JDG10014 Alternative John Deere Servicegard Electronic Injector Sleeve Removal Tool  Use to remove the electronic injector sleeve from the cylinder...