Products

Extra wide 3" Super Duty Band for better grip and reduced canister damage For use with larger hard to remove oil filters For use with a 1/2 inch s...

(Dr.1/2") (110-125mm) (4.33-4.92IN) Extra wide 3" Super Duty Band for better grip and reduced canister damage For use with larger hard to remove o...

Pitman arm can be removed while steering gear is on vehicle 3-1/4" spread handles the large pitman arms Robust desgn for durability and strength 2...

Strong but flexible Specifically engineered sizes designed for small round connector types Diameter sizes range from .030" to .120" and 5" lo...

Waterproof Super White Metal Marker

4.125 - 4.5 (104.7 - 114.3mm) range fits most tractors and other farm implement products Tough, stainless steel band with permanently bonded textu...

2.875 - 3.25 (73 - 82.5mm) range fits a common smaller filter size found on many domestic and foreign vehicles Tough, stainless steel band with pe...

3.5 - 3.875 (88.9 - 98.4mm) range fits most popular 3.625 standard filters Tough, stainless steel band with permanently bonded textured coating fo...

Install two bearing caps in one procedure on virtually all medium and light-duty u-joints An encased magnet is utilized for installation, retaining...

Provides fast and effective removal and installation of even the most seized wheel studs. Remove and install 10 studs in only 10-15 minutes. Elim...

Alternative to TG16002 Alternative Brake Anchor Pin Press Tool  Safely and easily remove brake anchor pins and bushings on virtually all 16-1/2” S...

This is a replacement set of 2 thick feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6400-9A Minimum thickness of .2...

This is a replacement set of 2 thin feet (fingers), and screws for the universal liner puller (FEPRO6400) OEM: PT-6410-4A Minimum thickness of .14...

Accommodates a 1/2" drive impact wrench Services GM, Ford and Chrysler built 1-ton 2WD and 4WD trucks Also works on medium-duty Class 2 through Cl...

Convenience: This tool does not have to be "turned down" after use Speed: Innovative torque mechanism requires only fingertip force to adjust. Dur...

For all torque-to-yield fastener applications Commonly used for tightening head bolts and other bolts where a torque angle is required Use with 1/...

Large 3-1/2" gauges feature a chrome bezel and rugged protective outer boot High pressure gauge reads 0-400 psi and 0-2800 kPa Low pressure gauge ...

Removes end yokes from 1600/1610-1810 series transmissions Puller device delivers 10 tons of mechanical power of essential force for working on bi...

Designed to remove airline disconnect  Very Compact Application: VOLVO/UD/DAF//HINO/FUSO  Size: 6,8,10,12,14,16 MM Alternative to Volvo 88800414/0...

Designed to remove airline disconnect  Very Compact Application: VOLVO/UD/DAF/HINO/FUSO  Size: 6,8,10,12,14,16 MM Alternative Volvo to 88800414/08...

Pneumatic bushing driver set removes and installs truck and trailer 1-3/8" anchor pin bushings and stuck anchor pins. Includes an 11-1/2" long dri...

Easily connects rear drum brake return springs Easy one hand operation Slotted ends on tool always hold spring at correct work angle No need to le...

Designed for use on heavy duty single, two-plate, push/pull, manual, and self-adjust clutches Shaft is constructed of lightweight fiberglass-reinf...

Designed for use on heavy duty single, two-plate, push/pull, manual, and self-adjust clutches Shaft is constructed of lightweight fiberglass-reinf...

1-3/4 in. O.D., 1 in. Pilot Constructed of a lightweight fiberglass-reinforced nylon body that won't hang up in the clutch disc splines Designed f...

Fits the Most Popular Size Seals for Class 7 and Class 8 Trucks The driver is designed to hold the seals to make installation easier Includes five...

Designed to withstand the force of a 3/4" drive impact wrench This rugged socket makes truck tie-rod end removal quick and simple Works on inner a...

Extra long reach 14" dual head chuck with internal lock on threads inflates in both straight and offset positions Easy to read, dual calibrated ...

Transmission Output Shaft End Yoke Remover for commercial trucks. Removes Spicer 1610, 1710, 1760, and 1810 series yokes. Works on Eaton Fuller win...

Heavy duty thrust bearing won't damage new threads Fits truck studs up to 22mm or 7/8" Installs truck studs in seconds Use with an impact wrench o...

TU-15-11A Diesel Compression Test Adapter Tool Used with J-6692-B Compression Test Gauge Includes short injector, long injector and hold-down bar w...

TU-15-25 DD40E, 7.3L, T444E, DT466E DT530/HT530 Compression Test Adapter ToolApplications: 1994 - 2003 Detroit Diesel Series 40E, 7.3L , T444E, DT4...

TU-15-42 3116 Compression Test Adapter Injector adapter with quick disconnect for Caterpillar 3116 engines. Used with J-6692-B Compression Test Gauge

TU-15-43 Diesel Compression Test Adapter Tool Used with J-6692-B, 303-D092, AM-303-D092, or J-26999 Compression Test Gauges Injector adapter with q...

TU-15-44 3126B, 3126E & 3126D Compression Test Adapter Used with J-6692-B, 303-D092, AM-303-D092, or J-26999 Compression Test Gauges Injector a...

TU-15-46 Diesel Compression Test Adapter This adapter works on 3176B, 3176C, 3196, C10, and C12 engines. Used with J-6692-B Compression Test Gauge

TU-15-49 3406E C15 C16 Diesel Compression Test Adapter  Injector adapter with quick disconnect for Caterpillar 3406E, C11, C13, C15, C16, C18, C27 ...

TU-15-78 Diesel Compression Test Adapter Tool This tool works on 2001-2010 Cummins ISX. Applications: Cummins ISX DOHC CM570 - 2001, 2002.5 Cummin...

TU-15-79 DT466E Maxxforce DT HT570/DT570 Compression Test Adapter ToolApplications: 2004 and newer DT466, Maxxforce DT and HT570/DT570 DieselDescri...

TU-15-81 C-7 C-9 Diesel Compression Test Adapter Tool This WON'T work on Acert models. Used with J-6692-B, 303-D092, AM-303-D092, or J-26999 Compre...

TU-15-84 C7 ACERT Compression Test Adapter Tool Diesel Compression Test Adapter for Caterpillar C7 ACERT engines 2008-present Used with J-6692-B Co...

TU-15-85 Diesel Compression Test Adapter Tool Used with J-6692-B, 303-D092, or J-26999 Compression Test Gauges1/4 NPT FittingApplications: Jeep Gr...

TU-15-86 Diesel Compression Test Adapter Tool Applications: •Volvo 12.1L with E3.1 Injector in 1998-2001 D12C and 2001-2005 D12D Engines

**Easily remove tough grease, oils and dirt with this heavy duty hand cleaner**Removes Tough Grime, Without WateHand cleaner features a pumice-fre...

TY27858 MF 837079726 JD DZ115390 Alternative John Deere 4.5/6.8 Liter Fuel Filter Tool  9-A

Handle telescopes from 5-1/2" to 25-9/16" This is the ideal tool to retrieve dropped metal objects when working in hard to reach areas Chrome hand...

Adjustable jaws with locking feature to suit both hexagon & octagon wheel bearing lock nuts Includes three sets round & three sets square ...