Products

ADAPTABLE BROKEN BOLT EXTRACTOR KEY SUCCESS DRIVERS, Unmatched versatility: Kit can conform to multiple bolt patterns on numerous engines. Most ec...

DODGE HEMI® 5.7L AND 6.1L ProKit PLUS Everything you could possibly need to complete a repair. And MORE. ProKit Plus Packages come Extractorless. ...

PMXPWA115 Injector for 2011-2023 Transit, 14-22 Focus, Fiesta, Ecosport, 19-23 Ranger, Bronco, Edge Fastest: Interchangeable bushings with fastene...

Rocky ProKit Plus Ford 4.2L V6, 4.6/5.4L V8, and 6.8L V10 Key Success Drivers Fastest: Interchangeable bushings with fasteners and Extractorless™ ...

Hook and point design Made of chrome vanadium steel Machined and hardened tips Lifetime guaranteed

PT-2200-72A 3823373 903 NH 5-1/2 Cummins Cutter Plate Assembly Tool Alternative  Works with MI-PT-2200-6 cutter bit 19-D

PT-2200-93 PT-2200-6 Alternative Shim Cutting Bit Tool  Shim cutter bit with traction grooves. Used with PT-2250-B 19-D

PT-2200-93 Shim Cutting BitUsed with PT-2250-BIf you are interested in a Shim Cutter Bit with Traction Grooves please look at MI-PT-2200-93

PT-2200-95 ZTSE25144-A DT466 DT530 Counterbore Shim Cutter Plate & Bit Tool Alternative Navistar with 4.589 Bore. Includes AM-PT-2200-93 Cutter...

PT-2210-12M 5296531 Alternative Cummins Carbide Cutter Tool  Superseded from PT-2210-12 Replacement Cutter Bit For Cummins Cutter Plates 5296531 (...

PT-2210-1A Plate Alternative and Hardware for PT-2210-AThis tool kit that can be used as a replacement base plate and hardware kit for your FEPRO01...

PT-2210-3A Cutter Plate Assembly for Mack E-7 Alternative  10-B

*** Metal Case Included*** PT-2210-A 50134 Alternative Caterpillar Cummins Mack Lower Ledge Counterbore Tool Kit  Used to resurfaces the lower ledg...

PT-2250-B Diesel Counter Bore Tool Alternative  AM-PT-2250-B is for cutting the cylinder liner collar (shims). Counterbore tool upper deck for shim...

PT-2400-13 CAT Counterbore Shim Cutter Plate Tool Alternative  Used with PT-2250-B Cutter Bit Included Applications: 4.75 3306 3304 D330 D330C D33...

PT-2400-15A 9U-7991 Alternative Cutter Plate Assembly Tool Used with PT-2250-B For Caterpillars with a 5.4" bore. 3406, 3408 and C15. *** Blade inc...

The puller will spread from 2" to 7-3/4" Block is 8-1/4" wide, and its forcing screw is 3/4" - 16 x 11-5/8" long Accommodates any cap screws up to...

Ultra-strong adhesive and reinforcing powders Repairs almost anything! Rock solid in 10 seconds! Q-Bond repairs are able to be grinded, filed, san...

Precise OEM design Metal construction for durability Used to disconnect high-pressure oil rail supply line Used on the Ford 6.0L diesel engine Mus...

Fast removal of push lock fittings for air, water, and hydraulics Saves time and money Used by Plumbing, Industrial, Automotive, and Trucking Ind...

R4422401 R4422402 KIT4454 Alternative Meritor Axle Seal Driver Tool Kit  For use on unitized pinion seals, A-1205-R2592, A-1205-P-2590, A-1205-N-25...

54 ft.-lbs. of maximum torque Variable speed lever-style throttle 360º adjustable exhaust directs air away from the operator and the work

76 ft.-lbs. of maximum torque at 220 rpm free speed Variable speed button trigger 360° adjustable exhaust directs air away from the operator and t...

Flip socket allows for work on multiple truck models Smaller side fits Ford light truck models from 1986-1994 with Dana front axle Larger side fit...

Pliers for removing electrical relays on most domestic and import vehicles Offset handle and thin tips allow access to relays in confined areas Sp...

Double-sided. Used with the 29090 Truck Anchor Pin Bushing Kit to remove and install anchor pin bushings and stuck anchor pins.

Pop in wheel 2" urethane wheel resists corrosion Metal compression ring holds wheel stem in groove, yet pulls free when pressure is applied

Cuts Flexible Hose up to 1-1/4" The Hose Cutter will cleanly cut heater hoses, fuel lines, and other types of flexible hose up to 1-1/4" For more ...

Replacement Bolt Spreader Assembly for Alternative J-45876 Cylinder Pack Liner Puller Remover Tool  J-45876 also sold: FEPRO5876.  5-E

Replacement O-Rings for 14L Sleeve Puller (FEPRO5876) Set includes 3 O-Rings G1A

Used to remove / install mainshaft assembly into the transmission main case. Alternative to OEM RR1004TR 17-B

Attach the RR1006TR Lifting Bracket to the top of the Auxiliary Section, and attach the chain of the Lifting Device to the Bracket Use with cha...

RR1009CL 2.00" Clutch Alignment Shaft / 14 Spline Eaton Road Ranger Used to align clutch disks during clutch installation. Size: 2,00" - 14 spline,...

The tools is used to push the countershaft assembly rearward to create clearance for bearing puller on FR & RT-series transmissions Alternativ...

Used with hand maul (FEPRO9127) to remove parts from the transmission. Alternative to RR1020TR 17-A

Removes input bearing for FR & RT-series transmissions. Alternative to RR1023TR Eaton Roadranger Puller for Input Bearing Sold in Bundle FEPR...

Eaton Roadranger Puller for Input Bearing Removes input bearing for FR & RT-series transmissions. Alternative to RR1023TR RR1005TR Alternati...

Install the Input Shaft Pilot Bearing Wear Sleeve Puller over the flats on the Pilot Bearing Wear Sleeve.  Tighten the 13 mm jackscrew on the...

2 Qty RR1063TR-3 Alignment Pins 4 Qty RR1063TR-4 Stand-off Bolts

*** Blue Box Included*** RR1064TR Alternative Eaton Clutch Alignment Tool Application: Eaton Endurant HD Automated  1.     EEO-14F112C 2.     EEO-1...

RR1067TR Transmission Jack Adapter Plate Designed specifically for use with Eaton Endurant automated manual transmissions (AMTs) It is com...

RR1085TR Input Shaft Press Tool KIT CONTENTS: 1 Qty RR1085TRW Weldment 1 Qty RR1087TR-6 Cup 1 Qty RR1085TR-7 Capture Plate  4 Qty 46990835 M10-1.5...

A capture plate, mounting onto the clutch housing via the threaded holes surrounding the input shaft bearing. It secures the front bearing in pos...

RR1087TR Alternative Eaton Clutch Alignment Tool Application: Eaton Endurant XD Series Automated Transmission ** Also sold in kit FEPRO2000 ** 21-D

RR2000CL Alternative Clutch Installation Tool Kit Eaton Endurant Tools KIT CONTENTS: 2 Qty RR1063TR-3 Alignment Pins 1 Qty RR1087TR Clutch Alignme...

RR2011TR Alternative Endurant Mechanical Diagnostic Kit The kit is used for assembly the Eaton transmission KIT CONTENTS: 1 Qty RR1086TR MTM Align...

***Metal Box Included*** Easily remove and install the Hendrickson Intraax Tri-Functional bushing while the suspension remains on the trailer. ...