Products

Up to 220 ft-lbs. of Nut-busting Torque More Access in Tight Spaces 4-Mode Drive Control A 2.8" head profile design allows for more access in tigh...

Greatest access in tight spaces at 4.8" in length 250 ft.-lbs. breakaway torque 4-Mode Drive control Auto-Shut Off mode reduces over fastening and...

20% More Power Than Pneumatic 4-MODE RPM CONTROL Greater Mobility & Access 0.3 HP Motor Output Greater Mobility and Access ***Must be shipped...

0.3 HP Motor Output More powerful than pneumatic die grinders and Replaces compressors and hoses Increased cost savings over pneumatic power The m...

Greatest access in tight spaces at 4.9" in length 250 ft.-lbs. breakaway torque 4-mode drive control Auto-shut off mode reduces over fastening and...

Industry leading 10,000 PSI max operating pressure and max flow-rate of up to 10 oz. per minute M18™ REDLITHIUM™ System: Compatible with over 40 M...

POWERSTATE™ Brushless Motor delivers up to 2,000 ft-lbs. Nut-Busting Torque, Making it the World's Most Powerful Cordless Impact Wrench ONE-KEY™ e...

Most Powerful Drill Only 6.9" in length for access into tight spaces and reduced fatigue Auto-Stop™ Control Mode, Enhanced Safety POWERSTATE™ Brus...

M20060-015 Alternative Cam Bearing Collet Tool Cam Bushing Adapter set for Caterpillar C-10 and C-12 Series MUST BE USED WITH DRIVE BARS, FEPRO9029...

This is the adaptor for Cummins K Series cam bearing Alternative to M20060-02 Used with FEPRO9029 19-E

This is the adaptor for CAT 3400 series bearing Alternative to M20060-07 Used with FEPRO2006-2 Bar included in Kit FEPRO9029-16-1 19-E

This is the adaptor for CUMMINS B SERIES bearing Alternative to M20060-33 Used with FEPRO9029 19-D

This is the adapter to remove MACK E-6 cam bearing. Alternative to M20060-36 FEPRO9029 is required  19-D

This is the adapter to remove MACK E-7 bearing. Alternative to M20060-37 FEPRO9029 is Required  19-D  

This is the adaptor for Cummins QSK Series cam bearing. Alternative to M20060-38 Used with FEPRO9029 19-D

Application: CAT C13 This is the cam bearing service adaptor set for CAT C13 Must be used with drive bars  Drive bars must be purchased sep...

This is the adaptor for MBE 4000 SERIES bearing Alternative to M20060-43 Used with FEPRO9029 19-E

This is the adapter to remove CAT C-7 cam bearing. Alternative to M20060-44 FEPRO9029 is required 19-D

M20060-99 Replacement Cam Bearing Puller Rod for M20065 Required for functionality of the following:  FEPRO9029-16 M20060-012 M20060-013 M20060-014

Eaton Fuller RT900 & 1200 Front & Rear Timing Block Kit Application is for Eaton RT900 & 1200 series. Alternative to M40114 18-A

The Bearing Driver for Front & Rear on Eaton 210 Series Alternative to M40117 40117 18-A

Used to install front crankshaft seal 446GC310P2, 446GC310P12, 8821 and 5609. Applications: MACK E-7 Alternative to J-37715-A 15-D

Applications: MACK E-6 and E-7 / E-7 ETECH MACK - 25633161 25500973, 20705740, 20705209, 20705626, 20706534, 25624093, 41035000811075, 4103500082...

This Mack KingPin Removal Set will make life easier when working on Mack trucks. Quickly remove and install Mack kingpin caps on 10,500, 12,000, 16...

Leaf Spring Socket Master to Remove and Install threaded leaf spring shackle pins on International, Peterbilt, Western Star, Volvo, Mack Kenworth ...

Telescopes from 8-1/4" to 30-1/4" Neodymium - Iron - Boron extra high flux magnet for maximum strength Stainless steel telescoping handle is stron...

Application: MAN/MERCEDES TRUCK Size: (H64.7, 12POINT, 1" ) Nut no. ref: 9463510072 MAN oem no. ref : 80996030176 3-C

***Box Included*** Fully adjustable pulling arms and stud adapters are quick and easy to install Includes following Adapter set: 5/8” – 18 Axle St...

Enables you to remove and install bushings ranging from 10mm to 42mm in diameter and 3/8" to 1-3/8" diameter Used in import and domestic cars, tru...

Set Includes: 3072 gauge set for Cummins (range of .008" to .030")  3074 gauge set for general Heavy Duty trucks and Contains 5469 double-end col...

The set contains 11 drivers for use on both cars and trucks up to 1 ton Includes two handles, one for hammering and one for use with an air hammer...

Used to install the camshaft oil seal accurately and evenly without damaging or deforming the seal. Application: Mitsubishi Diamante 3.5L (1997–...

Used to remove injector from engine head. Applications: MBE 900 & MBE 4000 Alternative to J-46381 J-46186 904-589-00-07-00 15-B

Used for accurate and even oil seal installation without de-formation or damage. Application: Mitsubishi Eclipse, Galant, Lancer Evolution, Delic...

Services 3/4 and 1 ton American made trucks with 4,6, and 8 bolt patterns.  Mega Hammer 4-6-8 Bolt Pattern

MEGAMAG EXTRA LONG MAGNETIC PICK UP TOOL

For screw plug removal and installation on fluid reservoir on condenser Also used for front wheel plastic cover. Application: BENZ (W203/W209) ...

When install or removing the pinion nut , use this tool to achieve proper torque specifications and stake the nut to the pinion Torque Spec for fr...

MH062677 Fuso Rear Oil Slinger Installer Alt For Slinger ME017240 Applications Include:  FE-HD, FE-SP, FE-SP640, FE84, FE85D, FE120, FE140...

MH063969 99360615 Cranking Shaft Locking Pin Alternative Applications: FUSO EURO 5 lift cars/IVECO engine Used for aligning the crankshaft timing p...

MH064272 Alternative Mercedes Benz Truck Automatic Transmission Adjuster Tool Applications: 2845, 2846, 2858 3-C

This tool is designed for removing the injector.  Application: IVECO DAILY F1C ENGINE (EURO 5) / FUSO LIFT CARS(EURO 5) Models: DAILY M.Y.200...

Used to remover and install injector sleeve ME302359 Application: MITSUBISHI 6M60 engine  16-A

Professional Grade Manufactured with the highest quality materials from an OE supplier Tests cooling systems and coolant caps Provides fast and ac...

Only dye needed for engine oil, transmission fluid, power steering fluid, hydraulic oil, gasoline and diesel fuel Service stickers included Works...

Step 1: Place the cylinder head on a flat and clean surface. Make sure that the cylinder head is not scratched when the valves are removed. Step 2:...

Commercial Brand: Ingersoll-Rand Metalworking For surface preparation work involving the cleaning or removal of paint, rust, dirt or weld slag, th...

Handle telescopes from 5-1/2" to 25-9/16" This is the ideal tool to retrieve dropped metal objects when working in hard to reach areas Neon Green ...