Products

Used to react against the crankshaft end to pull the seal out. Application: ISUZU 6.6L Engine; 2001- Later GMT800, 2500HD, 3500 with 6.6-liter Du...

J-44716 KV10117700 KV11105210 AWD & 2WD Ring Gear Stopper Flywheel Locking Tool Alt ST-301 This tool will work on 2WD and AWD applications when...

J-44935 J-44935-1 Alternative Feeler Gauge Tool Sold in Kit FEPRO4514  1-A

J-44935-1 Alternative Feeler Gauge Tool. These feeler gauges are considered wear items. No Warranty. Applications: Volvo: D12, D12A, D12B, D12C, D...

J-45299 EN-45299 6492 Engine Preluber Kit Applications: All GM Engines. May require additional adapters, depending on the year and engine. In an ef...

This tool is used to install the rear main oil seal. Applications: MBE 4000, Detroit Diesel  Alternative to J-45393 15-E

Air Brake Line Release Tool J-45666 Applications: 2007-2010 C-series MD trucks; 2014 Corvette & 2014 CTS with ELSD An updated EGR cooler is use...

J-45876 Cylinder Pack Liner Puller Remover Tool 5875 Applications: Detroit Diesel 60 Series 12.7L and 14.0L with EGR. MTUS2000 DD13 DD15 DD16 Not...

J-45910 6.6L Duramax Injector Nozzle-Cup-Sleeve-Tube Remover & Installer Alt Stallion ST-193 Applications: 6.6L DURAMAX DIESEL ENGINE ST-19...

Detroit Diesel 60 Series Crankshaft Alignment Tool J-45947 Alternative This alignment pin tool is used to ensure proper crankshaft alignment while ...

J-45983 Alternative Detroit Diesel Mercedes-Benz MBE4000 Piston Ring Compressor Must be used with FEPRO7110 to install the piston assembly into the...

Application: Detroit Diesel 60 series Alternative to J-46305 3-A

J-46594 Injector Puller 6779 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VIN, plus...

J-47110 Alternative Fire Ring Adapter Tool  Used with FEPRO5983 This tool is used with the piston ring compressor to adapt it to the pistons that u...

J-47411 Compressor Test HDE Adapter This tool is used with the previously release compression test gage to compression test or leak test on the DD1...

J-47411 Compressor Test HDE Adapter ( 5/16 NPT Fitting ) This tool is used with the previously release compression test gage to compression test or...

J-47450-1 Cam Gear Aligner Tool Sold in Kit FEPRO4514 

J-47450-1 & J-44426 Cam Gear Aligner Tool  Sold in Kit FEPRO4514  1-A

J-47908 Alternative Detroit Diesel 50 60 Series Compressor Test Adapter Tool  Applications: DD50 DD60 According to the service manual, it is recomm...

High quality stainless steel tank eliminates corrosion and holds up to 3 gallons Heavy duty hand pump assembly provides smooth operation and long ...

J-48641 Ring Gear Stopper NI-48641 Required to hold the engine stationary while tightening the harmonic balancer to specs.Use J-44716 or J-50288 on...

J-48761 99970-48761 4.0L Ring Gear Stopper Flywheel Locking Tool Alt ST-310 2005-2012 Pathfinder (R51) VQ40 4.0L2005-2012 Xterra (N50) VQ40DE 4.0L2...

J-54402 Injector Puller Tool NI-54402 Alternative This is a High-Quality Aftermarket Tool!  Applications: Titan XD 5.0L Cummins: 2016, 2017, 2018...

J-54411 4919040 Fuel Pump Remover Replacer Tool Alt ST-326 Applications include Cummins and Nissan.  

John Deere JD-49 JD-53 JD-203 Alternative Clutch Alignment Tool Application: 3010, 3020, 4000, 4010, 4020, and 4320The clutch alignment tool or pil...

JD227 Alternative Pressure Plate Gauge Tool  The JD-227 Clutch adjusting gauge with current modifications is used to adjust the engine clutch press...

JD254A Timing Tool John Deere 4039 4045 6059 6068 Servicegard Alt Works on the 4039, 4045, 6059 and 6068 engines. Supersedes JD254 10-A

JD258 Alternative Seal Installation Pilot Tool  Used to assist in installing carbon stop seal on fuel injector nozzle Applications: John Deere Powe...

JD264 Alternative Clutch Adjusting Gauge Tool  This tool is used to adjust the steering clutch pressure plate fingers. Used on the steering clutch ...

Includes Alternative to JDG467 and JDG468 Use on 6081, 6090, 6466 and 6619 engines Used to install Front Wear Sleeves 9-B

JDE32 Alternative John Deere Servicegard Clutch Finger Adjusting Gauge Tool  Use to adjustment of clutch fingers G2C

JDE38B Alternative Slide Hammer Fuel Injection Nozzle Puller Tool  This tool is used to remove pencil-type fuel injection nozzles Applications incl...

JDE51 Alternative John Deere Clutch Adjusting Tool Clutch tool to adjust transmission clutch release levers and PTO clutch operating levers. G2D

JDE61 Clutch Adjusting Plate Tool John Deere Servicegard Alt This tool is sometimes used with JDE52A Applications: 3010, 3020, 4000, 4010, 4020, 43...

Used to locking the flywheel on engines Application : 4024, 4039, 4045, 4239, 4276, 6359, 6619, 6059, 6068, 6076, 6081, 6090, 6105, 6125 and 61...

JDE92 Injector Socket Tool John Deere Servicegard Tool Alt Special service tool - Use on 3029, 4039, 4045, 6059, 6068, 6076, 6081, 6101, 6466 and 6...

JDG10014 Alternative John Deere Servicegard Electronic Injector Sleeve Removal Tool  Use to remove the electronic injector sleeve from the cylinder...

JDG10246A Alternative Cam Timing Pin Tool  Use to lock engine at top dead center (TDC) and to adjust unit injector preload - tool fits notches on...

JDG10357B Alternative John Deere Servicegard Front Seal Remover and Installer Tool  Use to remove and install the viscous damper assembly and cran...

JDG10539A Alternative John Deere Servicegard Coolant Tank Adapter Tool  Use to pressure test the engine cooling system. Use with D05104ST. 9-A

JDG10544 Alternative John Deere Servicegard Seal Remover Tool  Used to remove the front seal wear sleeve 9-B

JDG10549 Front Oil Seal Installer Tool  Used to install the front oil seal Note: Customers report this tool working with seal #'s DZ123164 and RE53...

JDG10576 Alternative Engine Barring Tool  Works on Powertech engines Use to rotate engine for service, setting valves, and locating top dead center...

JDG10631 Alternative Sleeve Puller Tool  Use to remove an existing electronic injector sleeve from the cylinder of the 9.0L diesel engine. Applic...

JDG10849 John Deere Servicegard Spanner Socket Tool AlternativeUsed to remove and reinstall retainer

JDG10997 Alternative Rear Crankshaft Seal Installer  Use this tool if you're working on a 9.0L PowerTech engine. Use FEPRO476JD for teflon seals (s...

JDG11004A Alternative Front Crankshaft Oil Seal Installer  Superseded from JDG11004 This tool is used to install and accurately align the seal on t...

JDG11200 Drive Clutch Puller Tool Alt Use to remove UTV Team Clutch from Tapered Shaft by screwing tool into drive clutch. Works on serial numbers ...