Products

Measures bonded brake lining from 0 to 1/2" in 1/64" graduations Place gauge over brake shoe to take reading For use with larger hard to remove...

Patented Design allows tool to be mounted to suspension instead of needing to be held by technician during bushing service Specially designed push...

Designed for removal / installation of Hendrickson suspension Bushings Hydraulic cylinder and Pump Included Similar to TG 15042 Application: Atro...

Designed for removal / installation of Hendrickson suspension Bushings This tool must be used with Hydraulic cylinder  Similar to TG 15042 Applica...

Designed for removal / installation of Hendrickson suspension Bushings Hydraulic cylinder Included Similar to TG  15042 Application: Atro PB50-26...

Universally suitable for the coupling nut of the high-pressure fuel line of passenger cars and trucks.  Specially cut-socket (19 mm) for quick and...

Universally suitable for the coupling nut of the high pressure fuel line of passenger cars and trucks, such as DAF XF/ CF with Euro 6, MX11/ MX13 ...

Applications: DT 466 /570, HT 570 (DT 9 and 10) , Navistar 2004 - 2007 570 2004 - 2007 DT 466 2007 MaxxForce 10 2007 MaxxForce 9 2007 MaxxForce DT...

Specially designed to install the rear oil seal. Easy to use, saves time, and prevents damage to the oil seal during installation. Applicatio...

Applications: HINO (E13C) truck 390/420/446 HP (700) Used to prevent damage to the Oil Seal during installation. Installs oil seal BZ5221E and BZ...

09407-1200 Crankshaft Front Oil Seal Installer Tool Alternative  Applications: HINO (E13C) truck 390/420/446 HP (700) Used to prevent damage to th...

Hino J05C J08C J05D J08E J05E Rear Crank Seal AZ4079-F Installer 09407-1040 Alternative This tool is designed for prevent oil seal 8970728231 89707...

Hino 09407 1030A 1030 Front Crankshaft Oil Seal Installer Alternative Hino JO8C JO8E . Same as S0940-71030 This tool is designed for prevent oil se...

Hino JO8C JO8E Injector Puller and Injector Cup Sleeve Installer Remover Kit Heavy Duty OEM Alternative Diesel Trucks Tap is considered a wear item...

Designed for the removal and installation of injector sleeves. Compatible with HINO N04C engine. Reference Part Number: Injector Sleeve No. S1117-6...

This tool is designed for prevent oil seal from damaged when installing it. Applicable: HINO (E13C) truck 390/420/446 HP (700)   Oil seal genuine ...

HLA Accumulator Fluid Port Wrench Alternative to RR1023HY 11-B

Allows for extra reach, removal and locking of clamps into open position Allows for removal of plastic and/or metal self-tightening hose clamps wi...

Cuts flexible hose up to 1-1/4" This hose cutter will clearly cut heater hoses, fuel lines, and other types of flexible hose up to 1-1/4" The stai...

Design for removal / installation Volvo CAB BUSH & LEAF SPRING PIN BUSHING Application: VOLVO VNL VHD VML Removes and Installs the follow...

Design for removal / installation Volvo CAB BUSH & LEAF SPRING PIN BUSHING Application: VOLVO VNL VHD VML Removes and Installs the follow...

I-Shift Transmission Main Shaft Gear Installer Adapters 9996315 & 9996081 Tool Kit Alt Used to install VOLVO (FM 440/ 500/ FH 540) truck, Rena...

Manufactured from heat treated chrome molybdenum steel for additional strength and durability Transfers the pressure from the thinnest part of the...

Maximum torque: 1,770 ft./lbs. New Fast-Torque feature delivers 1,000 ft./lbs. in 2 seconds New increased pressure rating can withstand 120 PSI fo...

Jumbo hammer mechanism Up to 1,100 ft./lbs. of torque Trouble-free, longer performance aided by the Pressure-Feed Lube System Compact and only 8.8...

Max Power - 300 ft/lbs of maximum reverse torque Max Control - New feather touch trigger and one handed forward and reverse control Max Reliabilit...

12 to 1 ratio - increased distance to spot ratio -40 to 932 degrees F, non- contact temperature readings Heavy-duty construction Constant maximum...

Maximum torque: 600 ft./lbs. IR Twin Hammer Mechanism Adjustable power regulator Pressure feed lubrication Time-proven durability and value

Power: Punish the toughest bolts with 1,350 ft-lbs of nut busting torque, powered by Ingersoll Rand’s finely tuned twin-hammer impact mechanism We...

Cold-forged twin hammer impact mechanism and motor deliver 2,000 ft-lbs of Nut Busting Torque, durability, and efficiency Steel hammer case stands...

3/8" Heavy Duty Air Drill With its industrial grade 3/8" chuck, this economical choice includes high quality features for general drilling and hole...

Precision: With an angle configuration that allows easier reach and access with an easy-to-control speed lever, you will be able to use this air d...

Visibility: The green 2236QTIMAX-G impact wrench allows you to see it on the job and in the garage, while customizing your toolbox. Also availabl...

Visibility: The red 2236QTIMAX-R impact wrench allows you to see it on the job and in the garage, while customizing your toolbox. Also available ...

Injector Puller Set for Cummins Drop forged body Two jaw design firmly grips the injector, with sliding hammer The two jaws have heat treatment He...

Injector Remover J-44639 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VIN, plus 200...

Removes clogged or stuck diesel injector seals 1 Kg (2.2 lbs) slide hammer removes the most difficult seals Slide hammer designed with integrated ...

***FEPRO9014 Includes Tap*** Includes ZTSE2587A 17-25-13 Remover and ZTSE2534A 04-148-3 Installer Use this tool for 12 Valve (2 per cylinder) engi...

RR1005TR Input Shaft Bearing Driver Installer Tool Used to install the input bearing on transmissions with 2" & 1.75" input shafts. Alternative...

Intake & Exhaust Camshaft Locking Pin Set - VM.1052 VM.1053 Alternative Includes ST-134 & ST-135 Use this special tool set to lock the ...

Application: Commonly found on class 3-5 trucks and equipment. (Ram 3500/5500, Chevrolet 3500/5500, Ford F-350/550, Isuzu NPR etc.)  Easily remove...

Used to drain the coolant from the radiator and low temperature radiator (LTR).  Application to International and Freightliner Cascadia trucks Cou...

IPR Injector Pressure Regulator Socket ZTSE4931 Older models use ZTSE4666 Used to remove and install updated IPR valves. Applications: DT 466, 530,...

Easily remove and install the injector pressure regulator in a 2003-2007 6.0L PowerStroke engine. Services Ford Injector Pressure Regulator (IPR)....

This is located in a very tight location Tool is built to bottom out on the hex so it does not put torque on the connector in case it can be reuse...

Designed to remove broken studs, bolts, socket screws and fittings Aggressive left hand spiral design for extra gripping power Spiral flutes are d...

Constructed of high grade heat treated alloy steel for maximum toughness and durability Ideal for tightening, clamping, twisting and turning Turn ...

Front and Rear Oil seal installer Applicable engine : ISUZU 6UZ1 engine Alternative to 109625-5403 (Front) and 109625-5412 (Rear)  19-C