Products

This fuel system coupler fitting connects to a "compu-check" quick-connect fitting.  Applications include Detroit Diesel S60, Cummins, Caterpillar...

8 quart capacity 12" total height 9-1/2" diameter 1" OD tip with screen Regular tractor

This tool is a must when servicing Mitsubishi Trucks. Mitsubishi uses a slinger (wear ring) installed onto the crankshaft, this prevents crankshaft...

Fuso 6M60 CAT 6D16 Truck Crankshaft Front Oil Seal Installer Tool MH062710 Alternative 16-A

Range: 2" - 6" Graduation: .0005” Carbide anvils Insulated grip Chrome plated handle

Offset blades are 4" long Includes 26 16 Hardened tempered steel blades The following sizes are: .005, .006, .007, .008, .009, .010, .011, .012...

Gbd 6" (152Mm) 180Sc Flex-Hone GBD 6" (152MM) 180SC FLEX-HONE

Puts the pry bar where you need it for best leverage Exceeds ANSI requirements for proven strength Indexible to over 180 degrees for greater lever...

Fixed Tip Snap Ring Pliers - .090" Straight GearWrench Straight Fixed Tip Convertible Snap Ring Pliers 0.090

This wrench is fully adjustable to fit hydraulic cylinders on vehicles having gland nuts from 1" to 3-3/4" in diameter Also reverses to work on ei...

In-line 6 Cylinder 2.8L 4 Cylinder 2004-2007 Chevrolet Colorado GMC Canyon 2002 GMT360 (Chevy Trail Blazer, GMC Envoy, Olds Bravada). Holding the...

The camshaft holder and gear retainer also work on the I6 4.2L but the flywheel holder doesn't Application:  Inline 4 Cylinder 2.8L Inline 5 Cy...

EN-51368 Front Crankshaft Seal Installer Tool The front crankshaft seal on SGE is installed to the cover to a a specific depth. EN-51368 installs ...

Alternative to EN-51092 FEPRO1092 is used to verify that the camshaft fuel pump lobe is at the base circle position before installing the high-pre...

Use to loosen or tighten injection pump retaining bolts whenever pump timing adjustment or pump service is required Services 1996–1999 GM full-siz...

Includes: 1x FEPRO2987 Alternative GM-52987 2.0" ProShear Nut Socket Tool  1x FEPRO2988 Alternative GM-52988 2.125" ProShear Nut Socket Tool  1x F...

GM Torsion Bar Unloader Drop forged frame This tool is required to safely release the tension on the front suspension torsion bar to service the f...

Designed with billet bulkhead pins Billet bulkhead pins give greater durability Used on "pressed on" water pump pulleys Used on many 2000 and late...

Made of high quality alloy steel (chrome-molybdenum) Engineered specifically for use with impact tools using the most up to date industrial specif...

Made of high quality steel chrome-molybdenum Engineered specifically for use with impact tools, using the most up to date industrial specification...

Made of high quality alloy steel (chrome-molybdenum) Engineered specifically for use with impact tools using the most up to date industrial specif...

For external lock rings used in truck and tractor transmissions Spring-loaded handles and 2 sets of tips Range: 3" / 75mm OAL: 13" / 33cm

Used with bearing and seal drivers for part installation/removal. Alternative to RR1019TR 18-B

Pulls harmonic balancers, timing gears, & parts having two or three tapped holes Slotted holes in puller body permit cap screws to be position...

Forged jaws with sure-grip teeth grab the filter for easy removal Slip joint ratchet and lock mechanism allows a secure grip on filters ranging fr...

With convenient hot circuit indicator, red ready light glows when starter switch is connected to a hot circuit; light goes off when switch is depr...

This tool uses a post that is threaded into the deck of the engine and used as a leverage point to insert the cylinder liners into the block past ...

Works on Ford aerodynamic headlights with rear mounted adjusters Comes in skin-pack 4mm hex with roller clutch for infinite settings Replacement H...

Fits filters ranging from 4-1/8" - 4-21/32" (104mm to 118mm) in diameter Features a 1-1/2" wide steel band that can stand up to the high torque ne...

Fits filters ranging from 4-21/32" to 5-5/32" (118mm to 131mm) in diameter Features a 1-1/2" wide steel band that can stand up to the high torque ...

Fits filters ranging from 5-5/32 in. to 5-21/32 in. (131 mm to 144 mm) in diameter Features a 1-1/2 in. wide steel band that can stand up to the h...

Heat treated steel "circlip" pliers for large equipment repair Replaceable tips and spring ratchet locking mechanism to securely hold against snap...

Designed to fit all Class 7 and 8 trucks including a wide variety of drive-lines from Spicer and Meritor Improved material and heat treat on major...

Designed to fit all Class 7 and 8 trucks including a wide variety of drive-lines from Spicer and Meritor Improved material and heat treat on major...

Simplifies and expedites the removal of heavy-duty yokes on drive shafts, transmissions and rear-end differentials without damage to yokes or other...

Designed for high torque requirements of truck filters, KTI's heavy duty strap oil filter has a forged steel handle, and extra length, sturdy stra...

Wrenches are designed for high torque requirements of truck filters Designed for use with a 1/2" square drive tool;1-1/2" wide bands for added ...

Measures bonded brake lining from 0 to 1/2" in 1/64" graduations Place gauge over brake shoe to take reading For use with larger hard to remove...

Patented Design allows tool to be mounted to suspension instead of needing to be held by technician during bushing service Specially designed push...

Designed for removal / installation of Hendrickson suspension Bushings Hydraulic cylinder and Pump Included Similar to TG 15042 Application: Atro...

Designed for removal / installation of Hendrickson suspension Bushings This tool must be used with Hydraulic cylinder  Similar to TG 15042 Applica...

Designed for removal / installation of Hendrickson suspension Bushings Hydraulic cylinder Included Similar to TG  15042 Application: Atro PB50-26...

Universally suitable for the coupling nut of the high-pressure fuel line of passenger cars and trucks.  Specially cut-socket (19 mm) for quick and...

Universally suitable for the coupling nut of the high pressure fuel line of passenger cars and trucks, such as DAF XF/ CF with Euro 6, MX11/ MX13 ...

Applications: DT 466 /570, HT 570 (DT 9 and 10) , Navistar 2004 - 2007 570 2004 - 2007 DT 466 2007 MaxxForce 10 2007 MaxxForce 9 2007 MaxxForce DT...

Applications: HINO (E13C) truck 390/420/446 HP (700) Used to prevent damage to the Oil Seal during installation. Installs oil seal BZ5221E and BZ...

09407-1200 Crankshaft Front Oil Seal Installer Tool Alternative  Applications: HINO (E13C) truck 390/420/446 HP (700) Used to prevent damage to th...

Hino J05C J08C J05D J08E J05E Rear Crank Seal AZ4079-F Installer 09407-1040 Alternative This tool is designed for prevent oil seal 8970728231 89707...