Products

This is the slide hammer and adapter kit to be used on Eaton Roadranger to remove auxiliary countershaft front bearings. This kit includes: ATCRR1...

Eaton Fuller Transmission Tapered Bearing 4301851 Puller Tool Alternative. This tool is used on Aux C/S Front and Rear 713, 913 and 918 Series. 18-C

This Input Shaft Bearing Puller is used on Eaton Fuller Ultra Shift Plus Transmissions 4308011. Heavy duty built to save time and money. Also sold ...

This is an output bearing driver to be used on an Eaton Alternative to RR1024TR 18-B

Used to support the upper countershaft during main box disassembly on FR & RT-series transmissions Alternative to RR1022TR 18-A

Works on Aux. C/S Front & Rear on FRO xx210 models  Also works on many other Eaton models where the 4302074 (small) tapered bearing is utilize...

RR1025TR Timing Block for FR-series Countershaft on Eaton Roadranger This tool is used to support the upper countershaft during main box assembly ...

The Eaton Fuller Transmission Roadranger Timing Block RT-series Countershaft Support Tool Alternative to RR1013TR is used to support the upper coun...

Eaton Fuller Transmissions Countershaft Front Bearings Removal Tool RR1014TR Alternative  Eaton Fuller Transmissions Countershaft Front Bearings Re...

Eaton Fuller Transmissions Countershaft Rear Bearings Removal Tool Alternative to RR1012TR-3 is used to remove rear countershaft bearing on RT-seri...

Universal fit for all Eaton air brake shoe anchor springs

EN-47589 Fuel Pressure Test Adapter Set Alternative  Includes six AM-9011 or AM-EN-47589-1 This adapter is used during diagnostic procedures on the...

EN-47589-8 6.6 01-07 Duramax Fuel Pressure Test / Block Off Adapter Set Alternative  Includes eight 9011 or EN-47589-1 This adapter is used during ...

EN-47702 Bolt Extractor Set Alt ST-199 Stallion Applications: 2002 2003 2004 2005 2006 GM 2.8, 3.5 & 4.2L VIN 8, 6 & S Line Engines Tap...

EN-47971 Gen 4 & 5 Oil Pressure Gauge Preluber Adapter Tool Alt This tool works on Generation IV & V V8 engines. If you're working on a Gen...

EN-47988 Serpentine Belt Tension Unloader Tool Alt Stallion ST-176 The EN-47988 is required to release the accessory drive belt tension. Minimal ...

EN-48313 Alternative Timing Chain Retainer Tool Set  Verify your application with the info provided. EN-48313 Timing Chain Retention Tool works on...

EN-48366 Camshaft Alignment Timing Tool This tool only works on European-built models. The only way to be 100% certain you have the right alignment...

EN-48368 Alternative Camshaft Alignment Timing Tool Set The only way to be 100% certain you have the right alignment tool, is to purchase SKU SAAB-...

Applications: High Feature V6 (2.8L, 3.0L, 3.6L) The camshafts must be held at TDC to properly set timing, especially once the inner timing chain i...

This tool is required to help keep the lower timing gear tensioner stationary while the cylinder head is removed from the I4,I5,I6 engines. If thi...

Application: High Feature V6 or ECOTEC with SIDI The SIDI high-pressure fuel pump mounts upwards towards the inside of the head, and must be ins...

EN-48932 09244-G2100 6725 Heavy Duty Belt Tension Compressor Tool Alt ST-329 Compresses belt tensioner spring when replacing the engine drive belt...

EN-48932 6725 Alternative Belt Tension Compressor Applications: LaCrosse with eAssist, Malibu ECO Used during engine drive belt replacement and sta...

EN-49774 Injector Remover Tool 6777 Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VI...

For Injector Sleeves 8-97606661-0, 8-98018462-01, 98018462, 8-98064259-1 This tool set allows stainless steel or brass injector nozzle sleeve r...

Timing Chain Retainer Set Alternative to EN-49982Applications: HF V6 Engines - Light Duty Trucks Buick Enclave model years 2013, 2014, 2016, and...

EN-50345 is used to drive or hold the jam nut on the valve clearance adjuster, while allowing a separate wrench to pass through EN-50345 to adjust...

Use this tool to install the crankshaft front oil seal and oil slinger. Applications: 4JJ1 Alternative to EN-50349 5-8840-2855-0 16-B

EN-50351 588402359 5884023590 5-8840-2359-0 Crankshaft Rear Oil Seal Installer Alternative  Applications: Isuzu 3.5 Ton (4JB1, 4JG1, 4JH1, 4JJ1...

EN-51146 Alternative Injector and Rail Assembly Replacer Includes -1 Installer and -2 Remover. Used with EN-51146-100 and EN-51146-150 to service t...

EN-51146 EN-51146-100 EN-51146-150 GM Opel Injector and Rail Assembly Replacer Master Tool Kit AltThis is a high-quality aftermarket tool kit.Used ...

EN-51146-100 Alternative Injector Rail Assembly Remover Plate EN-51146-100 allows the use of EN-51146 Injector Remove on SGE family engines

EN-51146-150 Alternative Remover Adapter Studs Used with EN-51146

EN-51267 Oil Pump Housing Aligner Tool Alt The oil pump housing must be centered to the crankshaft on Gen V V6 and V8 engines to ensure proper oil ...

The flywheel must be held in order to service the balancer and flywheel bolts. The torque required for the balancer bolt is 150 lb-ft + 180 degrees...

EN-51955 Alternative Injector Seal Installer & Sizer Tool Set  Works on injector 55515113(2.0L) & 12733960(2.7L) Applications: Acadia 2.0L...

EN-51987 6.6L Injector Remover Tool Use J-44639 for 2001-2003, plus 2004 with 8th digit of 1 in VIN Use J-46594 for 2004 with 8th digit of 2 in VI...

Required to test cooling systems on late model GM in.N in. body cars, Saturn and full size Ford cars, as well as some IHC and Kenworth medium and ...

Engine Rotating Tool ZTSE4786 Applications:  2007 MaxxForce 11 2007 MaxxForce 13 LoneStar , PayStar , ProStar , TranStar , WorkStar , Base Engine ...

Ratchet features locking collar for fast and secure length changes Telescopes from 24" to 39-3/4" Quick-release drive head Knurled handle ensures ...

Designed to remove broken studs, bolts, socket screws and fittings for high torque applications Aggressive left hand spiral design for extra gripp...

Designed to remove broken studs, bolts, socket screws and fittings Aggressive left hand spiral design for extra gripping power Spiral flutes are d...

Designed to remove broken studs, bolts, socket screws and fittings for high torque applications Aggressive left hand spiral design for extra gripp...

31 blades. 1 brass blade .010" Precision blades ensure accurate measurements Blades from .0015" to .035" (.038-.889mm) thickness are approximately...

Material: CR-V socket with satin & bright chrome plated, S2 bits with manganese phosphate  Contents:  18- 1/4" Dr.         5- Star-E: E4-5-6-...

Prevents costly damage to air tools caused by rust, scale and moisture Convenient minimum installation time into your compressed air system Gauge ...

Abrasives Flap Wheels FLAP WHEEL 1" X 1" X 1/4" 60 GRIT   Flap Wheel 1 in. x 1 in. x 1/4 in. - 60 Grit .